Bc2000 (for the BCF2000 & BCR2000)

Hi Mark

If i get the opportunity I will try to repro with steps - I figured it was something i did wrong. And like when you see the doctor - "when I do this it hurts" . "so stop doing it!"

I do want to thank you, Royce and other unsung heroes for figuring this stuff out.
I am tempted to visit ARM in Maidenhead (where i work) to find out how to make a S14 rather than just the A14. But with your tools I have sufficient knobs / buttons.

Tot ziens
Steve H
--- In bc2000@yahoogroups.com, "Mark v.d. Berg" <markwinvdb@...> wrote:
>
> --- In bc2000@yahoogroups.com, sghookings@ wrote:
> > I had got this SPC message (in BCR2000 display) before.
> > What I found is this invariably related to me using the "Update changed" from the BCManager.
> > 
> > If I changed to sending the full sysex, all the presets would load as expected. By "full" I think I mean the mode that sends a plethora of the .tx strings for each preset rather than the just the deltas.
> 
> I'm rather mystified by "SPC".
> I can see it within the BCR's firmware code, but I don't know how exactly it is triggered.
> I suspect it's short for "SPACE", which seems to indicate that the preset being uploaded is somehow too big; that might then explain why the preset doesn't work.
> So it would be nice if someone could come up with a preset that consistently triggers "SPC": I could then try to find out exactly what's going wrong here.
> 
> By "Update changed" you are referring to "Send modified data" from the "B-Controls" window?
> If "SPC" indeed only occurs during this particular operation, there might be a bug in it.
> 
> Mark.
>