aluminum panels
2012-04-08 by Gary
Does anyone know where the aluminum panel/plate with holes (serge style) can be obtained for mounting the pots switches etc.?
Thanks,
Gary
Thanks,
Gary
Thread
aluminum panels
Re: aluminum panels
2012-04-08 by Rico Loverde
Hey Gary
I dont know of anyone who offers blank serge panels with holes. Most go to
their local metal shop and have them cut a piece to size then drill the
holes out. Im pretty sure thats what Epinasty did with mine. I could send a
blank template that has the hole layout and size of the panel.
Rico
I dont know of anyone who offers blank serge panels with holes. Most go to
their local metal shop and have them cut a piece to size then drill the
holes out. Im pretty sure thats what Epinasty did with mine. I could send a
blank template that has the hole layout and size of the panel.
Rico
Show quoted textHide quoted text
On Saturday, April 7, 2012, Gary wrote:
> **
>
>
> Does anyone know where the aluminum panel/plate with holes (serge style)
> can be obtained for mounting the pots switches etc.?
>
> Thanks,
> Gary
>
>
>
--
________________
rico loverde
415.596.6255
ricoloverde.com
[Non-text portions of this message have been removed]
Re: aluminum panels
2012-04-08 by phil watkins
Laser or water cutting aluminum is best for low quantities (as opposed to sawing and drilling). If you can generate a DXF file and email a template with your material thickness, you can email it to a nearby shop for a price (any alloy will do). If you shop around you should be able to get a serge sized panel cut for $40-60 USD, unfinished.
Phil
Phil
Show quoted textHide quoted text
> To: cgs_synth@yahoogroups.com[Non-text portions of this message have been removed]
> From: ricoloverde@...
> Date: Sat, 7 Apr 2012 18:16:05 -0700
> Subject: Re: [cgs_synth] aluminum panels
>
> Hey Gary
>
> I dont know of anyone who offers blank serge panels with holes. Most go to
> their local metal shop and have them cut a piece to size then drill the
> holes out. Im pretty sure thats what Epinasty did with mine. I could send a
> blank template that has the hole layout and size of the panel.
>
> Rico
>
> On Saturday, April 7, 2012, Gary wrote:
>
> > **
> >
> >
> > Does anyone know where the aluminum panel/plate with holes (serge style)
> > can be obtained for mounting the pots switches etc.?
> >
> > Thanks,
> > Gary
> >
> >
> >
>
>
> --
> ________________
> rico loverde
> 415.596.6255
> ricoloverde.com
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/
> Yahoo! Groups Links
>
>
>
Re: aluminum panels
2012-04-08 by emmaker
Gary,
You might start with looking at the forums for Muff Wigglers:
http://www.muffwiggler.com/forum/
There are a lot of panels that people do and make available.
You might also check Front Panel Express out which a lot of DIYs use:
http://www.frontpanelexpress.com/
You can have a panel cut to size and drilled. Then you can supply the graphics. Or you can use their labeling/engraving. Not cheap though.
Jay S.
You might start with looking at the forums for Muff Wigglers:
http://www.muffwiggler.com/forum/
There are a lot of panels that people do and make available.
You might also check Front Panel Express out which a lot of DIYs use:
http://www.frontpanelexpress.com/
You can have a panel cut to size and drilled. Then you can supply the graphics. Or you can use their labeling/engraving. Not cheap though.
Jay S.
Show quoted textHide quoted text
--- In cgs_synth@yahoogroups.com, "Gary" <hydrophilos@...> wrote:
>
> Does anyone know where the aluminum panel/plate with holes (serge style) can be obtained for mounting the pots switches etc.?
>
> Thanks,
> Gary
>
Re: aluminum panels
2012-04-08 by Gary Hill
Thank you much for the info...
Best,
Gary
________________________________
Best,
Gary
________________________________
Show quoted textHide quoted text
From: emmaker <jays@...>
To: cgs_synth@yahoogroups.com
Sent: Sunday, April 8, 2012 10:34 AM
Subject: [cgs_synth] Re: aluminum panels
Gary,
You might start with looking at the forums for Muff Wigglers:
http://www.muffwiggler.com/forum/
There are a lot of panels that people do and make available.
You might also check Front Panel Express out which a lot of DIYs use:
http://www.frontpanelexpress.com/
You can have a panel cut to size and drilled. Then you can supply the graphics. Or you can use their labeling/engraving. Not cheap though.
Jay S.
To: cgs_synth@yahoogroups.com
Sent: Sunday, April 8, 2012 10:34 AM
Subject: [cgs_synth] Re: aluminum panels
Gary,
You might start with looking at the forums for Muff Wigglers:
http://www.muffwiggler.com/forum/
There are a lot of panels that people do and make available.
You might also check Front Panel Express out which a lot of DIYs use:
http://www.frontpanelexpress.com/
You can have a panel cut to size and drilled. Then you can supply the graphics. Or you can use their labeling/engraving. Not cheap though.
Jay S.
--- In cgs_synth@yahoogroups.com, "Gary" <hydrophilos@...> wrote:
>
> Does anyone know where the aluminum panel/plate with holes (serge style) can be obtained for mounting the pots switches etc.?
>
> Thanks,
> Gary
>
[Non-text portions of this message have been removed]