Datacolor User to User Support Group.

>
> Well, stranger things have happened at sea I suppose;
> 
> But I went through the entire procedure again (the 5th time this evening!) and it worked perfectly, no colour cast at all.
> 
> 
> I changed nothing within the system at all, very very strange indeed!
> 
> 
> Cheers
> 
> 
> 
> Mark
>

On Aug 26, 2011, at 4:20 PM, "keesatindy" <restorephoto@...> wrote:

> Interesting timing! I just contacted Datacolor a couple of hours ago because I am unable to save new profiles in 4.0.2. The reason I was recalibrating is because my update to 4.0.2 several days ago has somehow resulted in a slight red cast when I use Photoshop's Save for Web tool. I had had this problem (only worse) a few years ago before buying a new monitor and the Spyder3Pro. I hadn't had the problem since then until a few days ago. I had tried several things and finally decided to do a full recalibration again today. No luck. It won't let me save a profile once it has completed the calibration.
> 
> Tom
> 
> --- In datacolor_group@yahoogroups.com, Mark Vuleta <markvuleta@...> wrote:
>> 
>> Well, stranger things have happened at sea I suppose;
>> 
>> But I went through the entire procedure again (the 5th time this evening!) and it worked perfectly, no colour cast at all.
>> 
>> 
>> I changed nothing within the system at all, very very strange indeed!
>> 
>> 
>> Cheers
>> 
>> 
>> 
>> Mark
>> 
> 
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>

On Aug 26, 2011, at 4:56 AM, "markvuleta@..." <markvuleta@...> wrote:

> Hi guys.
> 
> I have Spyder 3 Studio suite and running version 4.0.2 for the monitor calibration.
> 
> I have just updated one of my screens and have profiled this and re-calibrated the other.
> 
> Both screens have a bad red colour cast to them now.  
> 
> I wonder if the filter over the sensor has failed or it it is something I have done incorrectly.
> 
> The system was working fine prior to changing one of the monitors.
> Windows 7 64bit, Nvidia GeForce 9500 GT running dual monitors, both AOC, one a LM721 and the new other one a i2353 IPS.
> 
> Similar symptoms have been posted previously, but the search did not show much of a result.
> 
> 
> Regards
> 
> 
> 
> Mark
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>

>
> Start by changing your profile "save" location, to make sure it's not a permission issue. 
> 
> C. D. Tobie
> Global Product Technology Mngr.
> Imaging Color Management
> Datacolor.com
> CDTobie@...
> 
> On Aug 26, 2011, at 4:20 PM, "keesatindy" <restorephoto@...> wrote:
> 
> > Interesting timing! I just contacted Datacolor a couple of hours ago because I am unable to save new profiles in 4.0.2. The reason I was recalibrating is because my update to 4.0.2 several days ago has somehow resulted in a slight red cast when I use Photoshop's Save for Web tool. I had had this problem (only worse) a few years ago before buying a new monitor and the Spyder3Pro. I hadn't had the problem since then until a few days ago. I had tried several things and finally decided to do a full recalibration again today. No luck. It won't let me save a profile once it has completed the calibration.
> > 
> > Tom