Emax

Hi
I can not boot off the Zip because it only sets to SCSI id 5 or 6.
The Emax is looking for SCSI id 0 as the boot drive.
Joe




On Aug 30, 2007, at 12:12 PM, Eduardo Saponara wrote:

>
> Could you boot off the zip? I've never booted off scsi, just the  
> internal HD.
>
> To: emax@yahoogroups.comFrom: joesanborn@...: Thu, 30 Aug  
> 2007 14:35:35 +0000Subject: [emax] Emu Emax 1 external SCSI Card  
> Reader Problem
>
> Emu Emax 1 external SCSI Card Reader ProblemI have an Emu Emax 1  
> with the external SCSI jack. I can get it towork with an external  
> Zip disk fine. But when I try to use it with myexternal MicroTech  
> card reader I am having problems. If I set thedrive to SCSI id 1 I  
> can boot off my floppy frive, format the card(card slot 1 with a  
> PCMCIA 20MB card). I can then use the copysoftware option to put  
> the OS on the card and go ahead and startsaving to the card. All  
> works fine until I restart the stystem. If Itake the floppy disk  
> out to boot off the Card Reader it freezes on theloading system  
> screen. If I reboot with the floppy it will boot butwhen I go to  
> use the Card Reader it will say something about nohardrive table  
> found. Then if I boot off the floppy and use theverify hard drive -  
> (Master - Special menu) it will find the drive andverify it is fine  
> and then I can save to the drive. The problem is that I can not  
> boot off the card reader (need to use afloppy all the time and I  
> have to veri! fy the drive (takes about 3minutes) everytime I want  
> to use it.Anybody have any suggestions. Thanks for any help.Joe
>
> __________________________________________________________
> Learn. Laugh. Share. Reallivemoms is right place!
> http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us
>
> [Non-text portions of this message have been removed]
>
>
> 



[Non-text portions of this message have been removed]