Yahoo Groups archive
Thread
2010-08-31 by jamesulibarri
Hi, Where are you guys getting your Emax 1 replacement LCD's The more blue the better, but anything will work at this point. Is it a MDK52V-0 or PC1602-H? I am not seeing too much online, but I am sure I am just not seeing it. Thanks
2010-08-31 by jammie
it is the pc1602-h you will also need a el panel for it the new screens also dont use negitive feed back for inverted displays so if you are fitting to a rack you have to discard the inverter circuit and fit a pot between pin 3 and ground and vcc ted has done it recently so he can also give you an idea
----- Original Message -----
From: jamesulibarri
To: emax@yahoogroups.com
Sent: Tuesday, August 31, 2010 11:51 PM
Subject: [emax] LCD for Emax 1
Hi,
Where are you guys getting your Emax 1 replacement LCD's
The more blue the better, but anything will work at this point.
Is it a MDK52V-0 or PC1602-H? I am not seeing too much online, but I am sure I am just not seeing it.
Thanks
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.441 / Virus Database: 271.1.1/3104 - Release Date: 08/31/10 06:34:00
[Non-text portions of this message have been removed]2010-09-01 by roy thomas
Hi thank you but the l c d is working fine its just reading disk not formatted when i try to boot the unit up and when i take the disk out and then try to turn it on again it just shows its looking for the S C S I AND THE DISK DRIVE JUST KEEPS ON SPINNING ?
-----Original Message-----
Date: Tuesday, August 31, 2010 4:21:47 pm
To: <emax@yahoogroups.com>
From: "jammie" <jammie.emma@...>
Subject: Re: [emax] LCD for Emax 1
it is the pc1602-h you will also need a el panel for it
the new screens also dont use negitive feed back for inverted displays so if you are fitting to a rack you have to discard the inverter circuit and fit a pot between pin 3 and ground and vcc
ted has done it recently so he can also give you an idea
----- Original Message -----
From: jamesulibarri
To: emax@yahoogroups.com
Sent: Tuesday, August 31, 2010 11:51 PM
Subject: [emax] LCD for Emax 1
Hi,
Where are you guys getting your Emax 1 replacement LCD's
The more blue the better, but anything will work at this point.
Is it a MDK52V-0 or PC1602-H? I am not seeing too much online, but I am sure I am just not seeing it.
Thanks
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.441 / Virus Database: 271.1.1/3104 - Release Date: 08/31/10 06:34:00
[Non-text portions2010-09-01 by jammie
`sounds like either the floppy disk is damaged or the floppy drive is malfunctioning have you got a scsi drive installed or fitted externally and is it set to 0if not the floppy drive will look for a os disk in the floppy drive
----- Original Message -----
From: roy thomas
To: emax@yahoogroups.com
Sent: Wednesday, September 01, 2010 4:16 AM
Subject: Re: [emax] LCD for Emax 1
Hi thank you but the l c d is working fine its just reading disk not formatted when i try to boot the unit up and when i take the disk out and then try to turn it on again it just shows its looking for the S C S I AND THE DISK DRIVE JUST KEEPS ON SPINNING ?
-----Original Message-----
Date: Tuesday, August 31, 2010 4:21:47 pm
To: <emax@yahoogroups.com>
From: "jammie" <jammie.emma@...>
Subject: Re: [emax] LCD for Emax 1
it is the pc1602-h you will also need a el panel for it
the new screens also dont use negitive feed back for inverted displays so if you are fitting to a rack you have to discard the inverter circuit and fit a pot between pin 3 and ground and vcc
ted has done it recently so he can also give you an idea
----- Original Message -----
From: jamesulibarri
To: emax@yahoogroups.com
Sent: Tuesday, August 31, 2010 11:51 PM
Subject: [emax] LCD for Emax 1
Hi,
Where are you guys getting your Emax 1 replacement LCD's
The more blue the better, but anything will work at this point.
Is it a MDK52V-0 or PC1602-H? I am not seeing too much online, but I am sure I am just not seeing it.
Thanks
----------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.441 / Virus Database: 271.1.1/3104 - Release Date: 08/31/10 06:34:00
[Non-text portions
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.441 / Virus Database: 271.1.1/3104 - Release Date: 08/31/10 06:34:00
[Non-text portions of this message have been removed]2010-09-01 by Ubik Vbik
you talk about to this?...
http://www.backlight4you.com/product_info.php/info/p905_EL-Panel--azure-blue--18mm-x-74mm--laminated.html
--- El mié, 9/1/10, jamesulibarri <jamesulibarri@...> escribió:
De: jamesulibarri <jamesulibarri@...>
Asunto: [emax] LCD for Emax 1
A: emax@yahoogroups.com
Fecha: miércoles, 1 de septiembre de 2010, 12:51 am
Hi,
Where are you guys getting your Emax 1 replacement LCD's
The more blue the better, but anything will work at this point.
Is it a MDK52V-0 or PC1602-H? I am not seeing too much online, but I am sure I am just not seeing it.
Thanks
[Non-text portions of this message have been removed]2010-09-01 by jammie
yep thats the el panel if your lcd is fine then if its dim to see then this panel is what you need you would be better of with el cut offs or email them with the exact dimentions of your old el panel
----- Original Message -----
From: Ubik Vbik
To: emax@yahoogroups.com
Sent: Wednesday, September 01, 2010 1:04 PM
Subject: Re: [emax] LCD for Emax 1
you talk about to this?...
http://www.backlight4you.com/product_info.php/info/p905_EL-Panel--azure-blue--18mm-x-74mm--laminated.html
--- El mié, 9/1/10, jamesulibarri <jamesulibarri@...> escribió:
De: jamesulibarri <jamesulibarri@...>
Asunto: [emax] LCD for Emax 1
A: emax@yahoogroups.com
Fecha: miércoles, 1 de septiembre de 2010, 12:51 am
Hi,
Where are you guys getting your Emax 1 replacement LCD's
The more blue the better, but anything will work at this point.
Is it a MDK52V-0 or PC1602-H? I am not seeing too much online, but I am sure I am just not seeing it.
Thanks
[Non-text portions of this message have been removed]
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.441 / Virus Database: 271.1.1/3105 - Release Date: 08/31/10 18:34:00
[Non-text portions of this message have been removed]