EXS 24 Logic Sampler Users Group

Simone Coen wrote:

> Select by is assigned to Midi CC Controller in the 4 Groups
> It doesn't matter which Controller number you choose (I say 1 since it's
> modulation and it is easy to verify!)
> You assign Group 1 to be selected when CC is between 0 and 31
> You assign Group 2 to be selected when CC is between 32 and 63
> You assign Group 3 to be selected when CC is between 64 and 95
> You assign Group 4 to be selected when CC is between 96 and 127
> 
> Now if you play a note on the keyboard you should hear the sample assigned
> to the group with CC 0-31

The note that sounds should be dependant on where you're mod wheel is, 
according to your above example.

> What happens is that you can only switch between two samples (or groups
> which is more appropriate) for every CC.

I'm not quite sure I understand what you mean by this.

> What you were supposed to have was to switch between the 4 (or 8, or 16 or
> whatever) groups (with assigned samples)... this doesn't happen and makes me
> feeling very bad...


Are you sure that you are sending the appropriate CC1 messages along 
with your note on events to switch the groups being triggered? What you 
describe should work. The groups should change based on CC1 messages, 
not velocity according to what you describe.


-- 
Eli Krantzberg
Nightshift Orchestra / Almat Productions
http://www.nightshiftorchestra.com