EXS 24 Logic Sampler Users Group

>   I'm assuming you meant a new "audio instrument" for you put the 
> EXS24....
> 
>  and a 
> "transformer"
> 
> 
> A transformer cabled to the exs24... is that correct?
yes that's right
> 
> And then you choose the transformer as you playing device in the 
> arrange window....correct?
no the instrument
> 
>  to transform ,each #cc11 into #cc7... all is ok when i 
> play the wx5 i see the fader moving and the sound is good (of course i 
> put everything via velocity to zero in EXS24 parameters).... well if i 
> play without recording all is ok ...No latency
> > if i record ,during the recording, the sound is good !
> > if i listen the track after recording everything is inaudible and 
> "seems" to be cause of all those #cc11.... 
> 
> Does it seem to be the last volume level that you got from your WX7 
> during the recording? Which would be low because you decreased your 
> cc#11 as you let off of the note.
> 
> 
>   If that's the case, then I would suspect that you don't have your 
> transformer cabled to the audio instrument correctly, it should be as 
> I said previously. You can also cable the transformer between the 
> "physical input", and the "sequencer input". That way the transformed 
> midi data will be recorded, and will show up in the editors as cc#7, 
> instead of cc#11. But remember to put the "physical input" and the 
> sequencer input" back like it was, without the transformer in between.
> 
>    I hope this makes some sense to you, and is maybe the problem.
> 
> regards,
> 
> David


David and telly

Thank you for your answer !
i tried your system but it's always the same problem !!!!
(i must say you that i have a friens with the same configuration and he has the same problem)

could you tell me if you are wind controller users ???

for me the latency of AW8 is not the same during recording ans playing !!

thank you for your help !!

denis


[Non-text portions of this message have been removed]

--- In exs-users@y..., "ddm14 chez Wanadoo" <dr.dm@w...> wrote:

> could you tell me if you are wind controller users ???

No, I've sold them before, when I used to work at a music store, and 
at that time was familiar with the WX7. But I don't play, just 
keys. You may want to do a search at Rocket Network for a player that 
uses Logic.

Hope you get it worked out...

regards,
df

>could you tell me if you are wind controller users ???

I sometimes use the Yamaha BC3 breath controller but haven't tried it 
with the EXS24 yet (mainly with my EX5R and JV2080). I'll try it out 
soon and report back.

>for me the latency of AW8 is not the same during recording ans playing !!

Try using Mac AV when recording and playback through the AW8. The Mac 
AV latency is very low.

Regards - Colin

> >could you tell me if you are wind controller users ???
> 
> I sometimes use the Yamaha BC3 breath controller but haven't tried it 
> with the EXS24 yet (mainly with my EX5R and JV2080). I'll try it out 
> soon and report back.


i shall be very interesting about your test with BC3 and EXS24
with expanders there are no problems (i use fs1r jv1080 and vl70m)

best

denis


[Non-text portions of this message have been removed]