Re: [korgpolyex] Re: CC issues...
2012-09-05 by Michael Hawkins
That is impossible due to the fact that there are 128 parameters and far less dedicated controllers are available. The theoretical maximum for MIDI dedicated
Messages
Browse messages
Page 43 of 141 · 7050 messages matched
Re: CC issues...
2012-09-05 by bimmerfan222
... I began to assume they were ref# s meant for the firmware and not actual MIDI CC s. I m guessing it wouldnt be too terribly difficult to assign parameters
Re: [korgpolyex] Re: CC issues...
2012-09-05 by Alex Drinkwater
I still think a dedicated CC for each and every parameter would be the best way to go. alx ... I still think a dedicated CC for each and every parameter would
Re: [korgpolyex] Re: CC issues...
2012-09-05 by Michael Hawkins
Those are the data values needed to select a particular parameter. Before you say it, you re right, it s confusing at best and downright silly at worst. I
Re: CC issues...
2012-09-04 by bimmerfan222
looks like they go for about $100, according to the last completed listing that sold. Any comment about those CC# s next to the parameters on the Parameter
Re: [korgpolyex] Re: CC issues...
2012-09-04 by Michael Hawkins
Actually, I have the Remote 25. Not the SL. http://www.ebay.com/itm/Novation-Remote-25-Midi-Keyboard-PSU-/230845437127?pt=Midi_Controllers&hash=item35bf75d4c7
Re: [korgpolyex] Re: CC issues...
2012-09-04 by Michael Hawkins
I use a Novation RemoteSL25. I am not a professional muso though. I just use it because it works for me. And it was cheap! Mike
Re: [korgpolyex] CC issues...
2012-09-04 by Alex Drinkwater
The Controller Friendly setup works well for programming sounds from a basic MIDI controller. It s quite fun just to randomly jerk the controllers around,
Re: [korgpolyex] CC issues...
2012-09-04 by Alex Drinkwater
You could try Pure Data http://puredata.info/ I m sure you could cook up something using that. It s not very user-friendly, though, unfortunately. a|x
Re: CC issues...
2012-09-04 by bimmerfan222
After some more digging, I found the three ways you mentioned. I guess for now I m stuck with the little freeware CC apps that are not NRPN configurable. I
Re: [korgpolyex] Re: CC issues...
2012-09-03 by Michael Hawkins
read the MIDI implementation chart again mate. VCF Resonance CC #71 VCF cut off CC #74 Then read pages 31 and 32 in the owners manual. You have no less than
Re: Decoding 800 Mk1 Cassette Data
2012-09-03 by korgpolyex800
I just uploaded the scan of the first five pages of the EX-800 manual which covers the sysex dump data layout.
Re: CC issues...
2012-09-03 by bimmerfan222
OK.. after digging into the MIDI Implementation Chart, I sort of answered my own question... CC#22 selects a Parameter Bank.. CC= Original Parameter Banks 1-8
CC issues...
2012-09-03 by bimmerfan222
Well I got around to hooking up my HAWK up to a software midi CC. I ve tried both MidiJoys and Unicontrol (freeware). What happens is it controls STANDARD Midi
Re: Hawk-800 / Atomahawk Preset Query
2012-09-03 by korgpolyex800
I am guessing that you re trying to use Tools mode to receive the EX-800 or MK2 sysex dump. That would of course make some sense and indeed I intend to rewrite
Re: [korgpolyex] Hawk-800 / Atomahawk Preset Query
2012-09-03 by Dave Mooney
Hey Mike, Thanks for getting back to me. Okay so the first issue was solved by getting a new midi interface. My AKAI MPK 25 wasn t sending sysex properly for
Re: [korgpolyex] new member
2012-09-03 by Tavish McDonald
Hi, Tavish, near future poly 800 owner, Seattle, here for information about the poly 800.
Re: [korgpolyex] new member
2012-09-03 by w.james.meagher@gmail.com
Welcome! Who are you? What Poly do you own? Where are you? Why are you here? James From Winnipeg Former Poly 800 owner Future Poly 800 II owner Here to learn
new member
2012-09-03 by Tavish McDonald
hiii!
Re: [korgpolyex] Hawk-800 / Atomahawk Preset Query
2012-09-02 by Michael Hawkins
Dave, Q: I found when I tried to reload all the patch bank sysex files to the 4 patch banks using tools mode -- patch mode the display changes to PATCHL but
Hawk-800 / Atomahawk Preset Query
2012-09-01 by Dave Mooney
Hi, I bought a Hawk-800 and Atomahawk mod in July and just received my modified poly-800 mk1 back from the synth technician yesterday. I ve run into a couple
Re: [korgpolyex] Re: Decoding 800 Mk1 Cassette Data
2012-08-30 by ASSI
... TL;DR? — the differences for the MkII sound data are at the end of the post. I don t remember how big the differences in the RAM data were, but nothing
Re: [korgpolyex] Re: Decoding 800 Mk1 Cassette Data
2012-08-30 by Michael Hawkins
This information relates to the MK2 sysex dump but that isn t going to work or match up to the Poly-800 (PS-800) or EX-800. I shall do my best to dredge up the
Re: [korgpolyex] Re: Decoding 800 Mk1 Cassette Data
2012-08-29 by ASSI
... From the Poly800 MkII manual: 2. RAM data structure. *The RAM data portion of DATA DUMP data is organized as shown here. DATA RELATIVE
Re: Decoding 800 Mk1 Cassette Data
2012-08-29 by bereiden
Here is an update to the cassette data format: byte 1: 0xB3 (I assume this is header info) byte 2: 0xBF byte 3: 0x00 (MIDI channel -
Re: [korgpolyex] Re: Decoding 800 Mk1 Cassette Data
2012-08-21 by Michael Hawkins
A very interesting project/twist on the old problem of Poly-800 not having any sysex capability. A shall have a look at the EX-800 sysex dump format again and
Re: [korgpolyex] Decoding 800 Mk1 Cassette Data
2012-08-21 by Michael Hawkins
Yes, the question on everyone s mind is WHY? Though I must say, your work from the tape audio end of things is going to make it much easier for me to
Re: Decoding 800 Mk1 Cassette Data
2012-08-21 by bereiden
Yes. So far I have a C program that reads a .wav file and decodes the data. If I can get an idea of what the remaining bytes are, I will then be able to write
Re: [korgpolyex] Decoding 800 Mk1 Cassette Data
2012-08-21 by Gordon JC Pearce
... So you re actually trying to decode the patch dumps and make sense of them on the PC, rather than just using audacity to record them as audio? -- Gordon JC
Re: Decoding 800 Mk1 Cassette Data
2012-08-21 by bereiden
Sorry, the diagram is supposed to look like this (got bit by the
Decoding 800 Mk1 Cassette Data
2012-08-21 by bereiden
Hi All, I m a new member here, having recently received a Poly 800 from a friend *for free*! I am trying to create a C program to interface with the cassette
Re: Learning Assy. Language ...
2012-08-18 by bimmerfan222
when I google 8085 assembler, I found this- http://gnusim8085.org/ looks like a nice GUI with editor, a mnemonic keypad for instructions, has a few C pseudo
Re: [korgpolyex] Learning Assy. Language ...
2012-08-18 by Michael Hawkins
All of the code is written in assembler. At the time that I started this project I found the Telemark cross assembler - tasm. http://home.comcast.net/~tasm/
Learning Assy. Language ...
2012-08-18 by bimmerfan222
Well I ve been making a little bit of headway with my self study of Digital Electronics and Assembler Language/Machine Code. I found two books for dirt cheap
Re: A small ray of arpeggio sunshine
2012-08-16 by scituate_mass
Hey Mike, Even if you don t do it, I m still thankful for all your work so far... But I will happily keep hassling you for it :) best, D
Re: [korgpolyex] A small ray of arpeggio sunshine
2012-08-15 by Alex Drinkwater
Thanks for letting us know, Mike. I know how it is when you have to do loads of work on your house. I am, as I write, putting off fitting replacement hardware
A small ray of arpeggio sunshine
2012-08-15 by Michael Hawkins
So, I still have HAWK fans hassling me about the arpeggiator. And for me, putting an arp into the HAWK would be the final feature that makes the HAWK an
Re: fastest MIDI control
2012-08-15 by scituate_mass
No more asking Mike questions... he needs time to finish the arpeggiator functions :) (just kidding... kind of....) -D
Re: [korgpolyex] AUDIO IN? passng thought...
2012-08-15 by Michael Hawkins
oh yes, that has been done many times before. ________________________________ From: k9k9dog To: korgpolyex@yahoogroups.com Sent: Tuesday,
AUDIO IN? passng thought...
2012-08-14 by k9k9dog
dunno if this was ever addressed...can this thing have an audio source in to filter etc.?
Re: [korgpolyex] Re: now it;'s a question about sysex!
2012-08-14 by Michael Hawkins
Yes, you can generally install the AtomaHawk with those mod s. It is however, up to the mod er to figure out the wiring. I do my best to help but my assistance
Re: [korgpolyex] fastest MIDI control
2012-08-14 by Michael Hawkins
Sysex is the slowest. Direct MIDI CC s come next followed by NRPN s. But the MIDI controllers (direct and NRPN) are all about the same speed. There is a
fastest MIDI control
2012-08-14 by ingsoc_1979
Mike, What parameter communication method (NRPN, controller, sysex) requires the least CPU overhead for HAWK? Lowest latency, fastest response, etc.
Re: now it;'s a question about sysex!
2012-08-14 by dpaulo2
Ahh, thanks for that Mike. On another subject, I m thinking about getting the Atomahawk, however I already have the Moog Slayer/FM800/filter switch mods in the
Re: [korgpolyex] Re: now it;'s a question about sysex!
2012-08-13 by Michael Hawkins
With MIDI CC 21, you just send the required data value for the specific command on MIDI CC 21. It s not an NRPN or RPN type CC. So you just send data on MIDI
Re: now it;'s a question about sysex!
2012-08-13 by dpaulo2
Mike, I m confused as on the Midi Implementation Chart many of the numbers duplicate those on the Parameter CC list. So I try CC21 for the sequencer and it
Re: [korgpolyex] now it;'s a question about sysex!
2012-08-13 by Michael Hawkins
You can send a global sysex message to change globals. But the sysex for that is a global bulk type message. There are no CC s or Sysex to change individual
now it;'s a question about sysex!
2012-08-11 by dpaulo2
Mike, hello again, my software editor is looking good, however I d like to integrate controls for the sequencer also. So far I ve used the Quick Parameter
Re: question about NRPNs
2012-08-11 by dpaulo2
I m using a Renoise tool called Guru which does most of the work for me. The result will hopefully be a very easy to use editor for the Hawk. I have had to
Re: question about NRPNs
2012-08-11 by dpaulo2
I m using a Renoise tool called Guru which does most of the work for me. The result will hopefully be a very easy to use editor for the Hawk. I have had to