Re: [korgpolyex] What Midi Controller do you use with Hawk-800??
2012-04-14 by t0ps
I would use the Behringer BCR2000 if I were you. Tons of knobs, lots of programmable options, and direct midi out (as well as usb too)
Messages
Browse messages
Page 48 of 141 · 7050 messages matched
What Midi Controller do you use with Hawk-800??
2012-04-14 by bimmerfan222
I ve been reading up on the Hawk800 mod and am curious if anyone has found a preferable midi controller to get inside the Korg 800 s patch parameters on the
Re: [korgpolyex] @ Ulrich--Re: rotary data dial +/-
2012-04-11 by Ullrich Peter
Hi Blaine! You are welcome! Regarding the ELM402: As it is intended for CMOS this would not disturb as the chip alone is not enough. You would add CMOS analog
Re: [korgpolyex] Encoders at Mouser
2012-04-11 by Ullrich Peter
Regarding the selection of the encoders: Keep in mind that you buy the correct version. You have the two values pulses per revolution (ppr) and detents per
@ Ulrich--Re: rotary data dial +/-
2012-04-11 by bimmerfan222
Hi Peter- Thanks for taking time to explain your datadial. I now see why your board and design costs more.. it s that ability to set the pulse width/time..
Encoders at Mouser
2012-04-11 by bimmerfan222
Hope this link works.. http://www.mouser.com/Search/Refine.aspx?FS=TRUE&N=4294759693+5502072+4292822897+1323043 if that don t work, try searching PEC09 on
Re: DCO and VCF of Joystick work, but not Pitch Bend
2012-04-11 by mr.biil
I hope top posting is ok I had the same problem - the pcb for the joystick was cracked. couldnt tell till I removed it and looked closely bill
Re: rotary data dial +/-
2012-04-10 by bimmerfan222
Thanks for the interest in the encoder mod Mike. I ll try to locate a couple good encoders with data sheets if possible. My idea is to possibly use a dial that
Re: [korgpolyex] Re: rotary data dial +/-
2012-04-10 by Ullrich Peter
Sorry, this was the email I wanted to send yesterday - but it was still in the outbox... ... Hi! Regarding the encoder problem. Simple connecting the encoder
Re: [korgpolyex] Re: rotary data dial +/-
2012-04-10 by Ullrich Peter
Hi! Regarding my email from yesterday. I didn’t have a look at the datasheet of the ELM402. I thought that it is the datasheet of the encoder itself and not
Re: [korgpolyex] Re: rotary data dial +/-
2012-04-10 by Michael Hawkins
Keep in mind that the HAWK mod has a joystick parameter control option that lets you use the X and Y axis to select parameters and set their values. But, I
Re: rotary data dial +/-
2012-04-10 by bimmerfan222
Hi Gordon, thanks for the reply. Surely there is a way to slip in a rotary encoder to mimic a up down value keys.. I was thinking of using this decoder by
Re: [korgpolyex] Re: rotary data dial +/-
2012-04-09 by Gordon JC Pearc e
... No, you won t. You ll get a rotary encoder that has to be turned painfully slowly to avoid it missing steps. The buttons are already debounced, and have
poly 800-ii custom program clip
2012-04-08 by gustavojobim2
Hi this is my first youtube clip it s a demo (audio only) of a custom program I made for my unmodded poly-800-II: http://www.youtube.com/watch?v=u1DGbUxWwLY
Greetings- New Member
2012-04-08 by bimmerfan222
Thanks for the membership approval. I m glad to find a little nook on the net dedicated to modding this lovable little synth. I was very happy to see a quality
Re: rotary data dial +/-
2012-04-08 by bimmerfan222
This is a mod I ll be attempting to do to my 800 MkI. I ve yet to see an 800 with this simple, yet very helpful mod and am a little dumbfounded that it has not
Re: Voices missing in "whole"-mode when waveform "square" is selected
2012-03-12 by mr.biil
have you made any progress on this?
rotary data dial +/-
2012-03-12 by k9k9dog
anyone like the look of this? http://go.to/datadial seems like it could be a nice addition, espec to the ex800.
Re: [korgpolyex] Re: Newly installed HAWK 800 problem
2012-03-11 by Michael Hawkins
you should not have an onboard battery when using the HAWK. And the HAWK instructions tell you to remove any onboard battery. ________________________________
Re: Newly installed HAWK 800 problem
2012-03-11 by k9k9dog
is your onboard battery dead?
Re: [korgpolyex] Re: Newly installed HAWK 800 problem
2012-03-11 by Michael Hawkins
If it flashes the displays 88 88 88 but doesn t show HA-800, then I would say you have one or more address lines not soldered or perhaps even bridged. Check
Re: Newly installed HAWK 800 problem
2012-03-11 by narfman96
Have you tried holding down the Write button when you turn it on to enter diagnostics mode?
Re: Newly installed HAWK 800 problem
2012-03-10 by eshalsall
I noticed another thing when I turn it on. Through the headphone output I can hear the filter cutoff slowly sweep from closed to open and the noise generator
Newly installed HAWK 800 problem
2012-03-10 by eshalsall
I just recently installed the HAWK 800 mod in my Poly 800 MK1. When I turn it on the display flashes 88 88 88 and doesn t change to the HA-800 as said
RE: [korgpolyex] approval
2012-03-07 by philippe.69
ok thank you very much De : korgpolyex@yahoogroups.com [mailto:korgpolyex@yahoogroups.com] De la part de Jernej Pogacnik Envoyé : mercredi 7 mars 2012 20:35
approval
2012-03-07 by Jernej Pogacnik
A Toshiba Libretto and Alesis Nanoverb inside a Korg Poly 800!!
2012-02-26 by eshalsall
I modded my Poly 800 by embedding a Toshiba Libretto 50ct laptop and an Alesis Nanoverb where the programming decal is on a normal Poly 800. I bought the
Re: [korgpolyex] DCO and VCF of Joystick work, but not Pitch Bend
2012-02-20 by F Aitken
Oops, nevermind about the pitch bend range question. Overlooked it in the manual. Looks like the Poly800 is working fine now. I probably will have to
Re: DCO and VCF of Joystick work, but not Pitch Bend
2012-02-20 by MFAitkenJr
After doing some tests, I think it may be a bad pitch bend slider as someone suggested, since the more I moved/worked it, the bending began to work. What is
Re: [korgpolyex] DCO and VCF of Joystick work, but not Pitch Bend
2012-02-18 by F Aitken
Well, some good news. The Poly 800 responded to Pitch Bend when I tested it with another controller. This points to a connection problem maybe. There is
Re: [korgpolyex] DCO and VCF of Joystick work, but not Pitch Bend
2012-02-17 by no freq
Hi, I once noticed this kind of problem on one of the poly-800 I serviced. And from what I can recall, I had to change a varicap for which I ve been able to
Re: [korgpolyex] DCO and VCF of Joystick work, but not Pitch Bend
2012-02-17 by F Aitken
To everyone replying, I appreciate your help. I will do further testing and examination this weekend. Any other ideas are welcome. If the service manual
Re: [korgpolyex] DCO and VCF of Joystick work, but not Pitch Bend
2012-02-17 by Martin Ator
If you use a MIDI monitor like MIDIOX from the poly 800 you should be able to transmit pitch bend data and see it being received,you can try to send pitch bend
Re: [korgpolyex] DCO and VCF of Joystick work, but not Pitch Bend
2012-02-17 by Martin Ator
Hmm. Probably not the joystick unless there s cracked solder on one of the joints or a connector or wire. I ll have a look at schematics. It might be a faulty
Re: [korgpolyex] DCO and VCF of Joystick work, but not Pitch Bend
2012-02-17 by Michael Hawkins
If you find out there is a bigger problem than just mechanical then check out:
Re: [korgpolyex] DCO and VCF of Joystick work, but not Pitch Bend
2012-02-17 by F Aitken
Hi, Thanks for the reply. Yes, I ve moved the Bend slider to max and it doesn t work. I need to test the pitch bend controlling the Poly from another
Re: [korgpolyex] DCO and VCF of Joystick work, but not Pitch Bend
2012-02-17 by Martin Ator
Silly question but, have you adjusted the BEND slider next to the volume control to maximum (10) the pitch bend wont work without this. I always forget about
DCO and VCF of Joystick work, but not Pitch Bend
2012-02-17 by MFAitkenJr
Hi, I have a poly 800 and the joystick half works. The DCO and VCF of Joystick work, but not Pitch Bend. Is this an easy fix? Or is the joystick just not good
suggestions?
2012-01-30 by k9k9dog
just some thoughts: more patch memories? sequence memories?(probably very tricky) chords?memories? did you see the jx3p project? kiwi
Re: [korgpolyex] Hawk and Atomahawk pre-built service
2012-01-30 by Michael Hawkins
See attached agreement and pricing for me doing the installation for you. Prices do NOT include the kits themselves. See www.hawk800.com for pricing the kits
Re: [korgpolyex] AtomaHawk'd MkII - voltage control trigger output needed
2012-01-30 by Michael Hawkins
If you have the later versions of the HAWK board, then there is in fact an unused latch available. However, I would have to rewrite some of the software to
Hawk and Atomahawk pre-built service
2012-01-30 by MFAitkenJr
Hi, I have A Poly 800 mk1 and been thinking about buying these kits. I have decent tech skills, but having the time to build is an issue. How much is it to
AtomaHawk'd MkII - voltage control trigger output needed
2012-01-30 by ingsoc_1979
rather than continuing to rely on a Kenton box to generate analog triggers via MIDI, I d like to ask if there s anywhere inside Poly-800 that one can find like
Re: [korgpolyex] Voices missing in "whole"-mode when waveform "square" is selected
2012-01-29 by Michael Hawkins
The saw and square waveforms are created by resistor bridge units - BR5, BR6, BR7 and BR8. BR7 and BR88 are for voices 1 to 4, square and saw. BR5 and BR6 are
Voices missing in "whole"-mode when waveform "square" is selected
2012-01-28 by m.sislack
Hello again :) After successfully having solves the strage-display-problem by replacing IC33 my Poly now shows a further problem: When DCO waveform square
Re: [korgpolyex] Re: Problem with my poly800 reverse keys edition... :/
2012-01-27 by Martin Ator
Thanks. ________________________________ From: Michael Hawkins To: korgpolyex@yahoogroups.com Sent:
Re: [korgpolyex] Re: Problem with my poly800 reverse keys edition... :/
2012-01-27 by Michael Hawkins
Yes, that s right. ________________________________ From: cyllall To: korgpolyex@yahoogroups.com Sent: Friday, January 27, 2012 1:32 PM
Re: Problem with my poly800 reverse keys edition... :/
2012-01-27 by cyllall
OK. I think I have a problem with IC17 TC40H074P. I couldn t detect CLK-1 or CLK-2 from the master oscillator. Is this the same as a 7474 dual d-type flip
Re: Problem with my poly800 reverse keys edition... :/
2012-01-27 by cyllall
I have a problem similar to this with a Poly-800 that I rescued recently. All that has an affect is param 84 VCF 81 Freq 41 Cutoff 42 Resonance 33 Noise Param
Re: Poly 800 mk2 - no effects but someones added a 1/4 jack and wired to the fx ?
2012-01-06 by fugasiyokonda
yeah i menat to say the eq isnt working either.My guess is that its an on off switch maybe and i will test with a pedal later if i can find one.Just trying to