Re: [korgpolyex] Re: Question for the group
2012-06-07 by Martin Ator
Nice work ________________________________ From: mr_rona To: korgpolyex@yahoogroups.com Sent: Thursday, 7 June 2012, 15:27 Subject:
Messages
Browse messages
Page 47 of 141 · 7050 messages matched
Re: Question for the group
2012-06-07 by mr_rona
Sorted guys thanks so much for all your help, in the end it was the power supply circuit 5v was coming up at less than 4v so I adjusted it according to the
Re: [korgpolyex] Re: Question for the group
2012-06-07 by Martin Ator
It s all in the service manual which can be downloaded from the group archives(try the files section). There is a calibration routine for the joystick, written
Re: Question for the group
2012-06-07 by mr_rona
Thanks for that Pan i m inside the poly now but I dont seem to be able to find them I dont suppose you remember there vr numbers do you or what board they were
Re: Question for the group
2012-06-07 by Pan Ryba
Hi there. There is a tuning pot Inside your poly 800. actually there are two as I remember ... (coarse and fine) CHeck them. but be carefull. If you turn that
Re: Question for the group
2012-06-05 by mr_rona
The tuner slider will only tune about half a semitone so wont tune up the 3 semitones its out and i took the joystick out and check the pots and there fine I
Hawk-800 and 2.53 forgets selected patch after power off
2012-06-05 by tim.tashpulatov
Hi, I have finally made it into programming my boot ROM with 1.95 and sysexing 2.53 on top of that. Everything works, except maybe two or three things: - in
Re: [korgpolyex] Re: Question for the group
2012-06-05 by Peter van Beerendonk
Probably just the potentiometers inside the joystick unit which are not good aligned.
Re: [korgpolyex] Re: Question for the group
2012-06-05 by Gary Peters
Doesnt it have the tuner slide From: mr_rona To: korgpolyex@yahoogroups.com Sent: Tuesday, 5 June 2012 5:12 PM Subject: [korgpolyex] Re:
Re: Question for the group
2012-06-05 by mr_rona
Yes everything works as normal the joysick works both ways, I first thought it may have been the power supply because when I checked the voltage it wasn t
Re: Question for the group
2012-06-05 by bimmerfan222
does the pitch bend function work both ways or only one way? I ve got a bad joystick that is stuck modulating.. I have to shove the stick all the way down to
Question for the group
2012-06-03 by mr_rona
I love my korg poly 800 but its now out of tune at the moment its 3 semitones down I was told it was the joystick but I cant see it because it is always 3
Membership
2012-05-30 by mybrokenemail@gmail.com
Hi.. I ve just bought a korg poly800 ser1 I wanna be informed about this synth, and probably do some mods later... Thanks for the admission. Guillaume
Re: [korgpolyex] H800 can modulate resonance??
2012-05-14 by Michael Hawkins
Yes, resonance can be modulated and controlled quite independent of the VCF. If you look at the owners manual you can see that DCO modulation is set up in
Re: [korgpolyex] Re: Rehosted Encoder/Decoder Circuit with counter & buffer
2012-04-30 by Michael Hawkins
I use freepcb for PCB development. I use futurlec for PCB manufacture. Mike ________________________________ From: bimmerfan222 To:
Re: [korgpolyex] Re: Poly 800 Mk1 audio out jack exact replacement availability?
2012-04-30 by Martin Ator
coooo el ________________________________ From: Tim To: korgpolyex@yahoogroups.com Sent: Monday, 30 April 2012, 7:51 Subject:
Re: Poly 800 Mk1 audio out jack exact replacement availability?
2012-04-30 by Tim
Thanks for the assistance. Had a chance today to open the Poly 800 up and I resoldered the Audio Out jacks and all now works beautifully! No need to try and
Re: [korgpolyex] Patch Edit App??
2012-04-29 by Daniel Forró
It s pretty well explained in Owner s Manual, pages 19-20, including some graphical examples. So you are rather wrong when you think only setting of BP and
Patch Edit App??
2012-04-29 by bimmerfan222
I lost the post, but I thought someone on here mentioned a patch edit program.. maybe it was for the MkII and Mac only (early gen.). Is there a program to edit
Re: Rehosted Encoder/Decoder Circuit with counter & buffer
2012-04-29 by bimmerfan222
Thanks Fran & Martin, I will definitely check those apps out.
Re: [korgpolyex] Poly 800 Mk1 audio out jack exact replacement availability?
2012-04-29 by Martin Ator
Silly questions coming up Have you checked the soldering on the jack socket itself? Have you tried a different cable? Usually it s cracked solder on the jack
Poly 800 Mk1 audio out jack exact replacement availability?
2012-04-29 by Tim
Hi all, Is there a direct pin for pin replacement for the Mk1 Poly 800 s audio out jack (L/Mono) available and where would I purchase it? The signal is all
Re: [korgpolyex] Re: Rehosted Encoder/Decoder Circuit with counter & buffer
2012-04-28 by Martin Ator
Hi Blaine, This kind of stuff is beyond the capabilities of my organic MPU but I use designspark PCB myself. RE service manual You
Re: Rehosted Encoder/Decoder Circuit with counter & buffer
2012-04-28 by narfman96
Hi Blaine, I ve been quietly lurking along.... www.expresspcb.com is my personal favorite for creating schematics and designing boards. I am not affiliated in
Re: Rehosted Encoder/Decoder Circuit with counter & buffer
2012-04-28 by bimmerfan222
Yes, I did cut/paste the schematic together. I don t have a schematic software app. Do you have any recommendations for a freeware app? That and a freeware
Re: Rehosted Encoder/Decoder Circuit with counter & buffer
2012-04-28 by korgpolyex800
Yeah, I see both of them now. Yes, that circuit looks about right. I wouldn t use an LS chip for the schmidtt triggers. 74HC04 is low power. That part of the
Rehosted Encoder/Decoder Circuit with counter & buffer
2012-04-28 by bimmerfan222
Yes, the photo is on here in the Photos folder under Encoder Project . http://groups.yahoo.com/group/korgpolyex/photos/album/303237603/pic/list I guess it
Re: [korgpolyex] Encoder/Decoder Circuit with counter & buffer
2012-04-27 by Michael Hawkins
I am getting We are sorry, you can not display images hosted by Yahoo! Groups on non Yahoo! Groups pages. when I try your link. Is the diagram in korgpolyex
Re: can anyone here code c++???
2012-04-26 by k9k9dog
oh, i know what it was too: i was a bit put off by my utter uselessness at java when they tried to teach me some at college...
Re: can anyone here code c++???
2012-04-26 by k9k9dog
hi zoinky, thanks(for the encouragement). i ve been told that. thing is, i d planned to dedicate some time to learning c++ a couple of years ago, and then
Re: can anyone here code c++???
2012-04-26 by zoinky420
... FWIW, I took a class in C++ about a decade ago, and I remember being surprised at how simple it is. Of course I haven t done any C++ coding since then so
Encoder/Decoder Circuit with counter & buffer
2012-04-21 by bimmerfan222
Hey Mike, I ve uploaded a pic of an encoder circuit using the chips you suggested.
Re: [korgpolyex] Re: can anyone here code c++???
2012-04-18 by Jeffrey Harris
Seems like you just havn t explored ctlr. It is very much not code based. The User Interface IS very much drag and drop. Set your knobs to send/receive sysex
Re: can anyone here code c++???
2012-04-18 by k9k9dog
i think automap works with both remote versions. may be wrong, but i d like to know, as this could be a good option(for other stuff too). re: ctrlr...YES, i
Re: [korgpolyex] novation remote map for hawk800?
2012-04-17 by Alex Drinkwater
Are you talking ReMOTE SL here, or the original SL? a|x ________________________________ From: Michael Hawkins To:
Re: [korgpolyex] novation remote map for hawk800?
2012-04-17 by Michael Hawkins
Yes, I have but it s not on sourceforge right now. I shall put it up there this weekend. Mike ________________________________ From: k9k9dog
Re: [korgpolyex] can anyone here code c++???
2012-04-17 by Jeffrey Harris
Without any of the knowledge... you could probably build your thing in ctrlr... there may already be a template for it as well... this is very cool software!
can anyone here code c++???
2012-04-17 by k9k9dog
can anyone here code c++? i can t, but i use synthedit, and i could make a VST progger for hawk800 if i get some help with a sysex variable module for
novation remote map for hawk800?
2012-04-16 by k9k9dog
have you made the remote automap available?
(no subject)
2012-04-16 by Alienxxx Xman
Greetings everyone. I would like to know what most people use as a librarian to load syex data to Korg poly 800 ver 2. What works the best . What editor is
Re: using interrupts instead of polling...
2012-04-16 by bimmerfan222
Thanks for the info and help Mike. You said: plus the circuit to convert the encoder to a clock up and clock down signal. Do you mean a decoder circuit to
Re: [korgpolyex] using interrupts instead of polling...
2012-04-15 by Michael Hawkins
and I could add that the counters would be read by the CPU through a 74HC244. One for each. So the parts list so far is the encoder itself, two 74HC244 s and
using interrupts instead of polling...
2012-04-15 by Michael Hawkins
I could be wrong, but it seems that implementing the use of the 8259 chips would be a way to decrease the scanning requirements of the CPU. It s just all the
@ Ulrich--Re: rotary data dial +/-
2012-04-15 by bimmerfan222
Thank you Peter and Mike for the feedback of my inquiries to mod encoders onto a P800. I suppose I m driven to do the mod because I just simply like the idea
Re: [korgpolyex] @ Ulrich--Re: rotary data dial +/-
2012-04-15 by Michael Hawkins
Hi all, There are several unused IO ports available on the HAWK board and it would be possible to create a new board that exploited those available IO ports.
Re: [korgpolyex] @ Ulrich--Re: rotary data dial +/-
2012-04-15 by Ullrich Peter
Hi Blaine! Of course it would be possible to add some more encoders, but you have to take care of them in the software. The more you need to scan or poll the
@ Ulrich--Re: rotary data dial +/-
2012-04-15 by bimmerfan222
Hey Peter, I think this is what Mike (the creator of the Hawk800) was intending to do with the idea of adding some encoder dials to the Poly800. Couldnt there
Re: [korgpolyex] @ Ulrich--Re: rotary data dial +/-
2012-04-14 by Ullrich Peter
Hi Blaine! If you are in the situation that you can change the source code then you have more features of course. I bet that it would be possible to add some
@ Ulrich--Re: rotary data dial +/-
2012-04-14 by bimmerfan222
Hmmm... I m thinking maybe Mike might be able to do a little bit of code magic to make the CPU scan for activity from rotary encoders/decoders and direct their
Re: What Midi Controller do you use with Hawk-800??
2012-04-14 by bimmerfan222
funny you mentioned Behringer. I ve had my eye on a few of their controllers. Mainly the cheaper keyboard ones like the umx25 That BCR2000 sure looks like a