Lpc2000

Hi Mike,

I wanted to ask you if you were able to download programs to flash and debug
them using AXD through MultiICE. I can easily work my s/w from RAM but since
my project is  getting bigger every day I need to move some libraries into
FLASH. I want to instruct the linker to create several object files that I
can place in RAM or FLASH. For example have the f/w drivers, OS be in FLASH
while I only run code that I'm working on from RAM.  I was wondering if it
is possible, and if it is how would one go about it.

Thanks in advance,

m.

 

  _____  

From: Michael Mathews [mailto:mmathews@...] 
Sent: Tuesday, May 04, 2004 1:09 PM
To: lpc2000@yahoogroups.com
Subject: RE: [lpc2000] Ashling EVBA7 & ARM Multi-ICE

 

Hi,

To use JTAG debug on my EVBA7 with 2106 I also needed to remove JP12 to
disable onboard (usb) debug.

Mike

At 09:50 05/04/2004, you wrote:



"urn:schemas-microsoft-com:vml" xmlns:o =
"urn:schemas-microsoft-com:office:office" xmlns:w =
"urn:schemas-microsoft-com:office:word"> 
Milos
 
When I try to run the auto configure command, multi-ICE comes up with an
error message "Auto configuration Failed. Check the target power is on. Your
chip may require manual configuration"
 
When I try to load it with the supplied configuration called single.cfg, it
tells me that there is an ARM7TDMI present, but when I run AXD I get a
message telling me that "The processor will not enter debug state when
requested" and I then receive subsequent messages while trying to force a
reset.
 
On the EVAB7 I have 
JP6 (ENABLE SERIAL_ISP) removed
JP11 (ENABLE PRIMARY DEBUG) inserted
JP8 (SECONDARY DEBUG) removed
 
Do I have to manually configure a target for Multi-ICE or should auto
configure work?
 
Thanks
Pauric
 

-----Original Message-----

From: Milos Prokic [mailto:mproki@...]

Sent: 04 May 2004 17:23

To: lpc2000@yahoogroups.com

Subject: RE: [lpc2000] Ashling EVBA7 & ARM Multi-ICE

Hi,

I have setup the MultICE to work with the Ashling. I only had to remove the
jumper for on-board debug, and leave the jumper on primary debug, do not
switch it to the secondary. MultiICE detected the core without any problems.
Once the core was detected I was able to reset and run the AXD.

Does multiICE see anything? Unknown device or something? 

Cheers,

m.

 

  _____  

From: Pauric Doherty [mailto:pauric_doherty@...] 

Sent: Tuesday, May 04, 2004 12:20 PM

To: lpc2000@yahoogroups.com

Subject: [lpc2000] Ashling EVBA7 & ARM Multi-ICE

 

All,

 

I'm currently trying to get the ARM Multi-ICE unit to connect to the EVBA7
board from Ashling with an LCP2194 chip. 

I cannot get the multi-ICE unit to reset the chip. It won't even auto detect
it. I've followed the guide on how to enable the board for an external
debugger but still no luck.

 

Has anyone tried the above situation .... or am I missing something obvious.

 

Thanks in advance

Pauric






Yahoo! Groups Sponsor 
ADVERTISEMENT
 
<http://rd.yahoo.com/SIG=129gtjuh2/M=295196.4901138.6052515.3001176/D=groups
/S=1706554205:HM/EXP=1083775489/A=2128215/R=0/SIG=10se96mf6/*http:/companion
.yahoo.com> click here
 []
<http://us.adserver.yahoo.com/l?M=295196.4901138.6052515.3001176/D=groups/S=
:HM/A=2128215/rand=819205855> 

  _____  

Yahoo! Groups Links 

*	To visit your group on the web, go to: 
*	http://groups.yahoo.com/group/lpc2000/ 
*	  
*	To unsubscribe from this group, send an email to: 
*	lpc2000-unsubscribe@yahoogroups.com
<mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe>  
*	  
*	Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/>  Terms of Service. 

 

  _____  

Yahoo! Groups Links

*	To visit your group on the web, go to:
http://groups.yahoo.com/group/lpc2000/
  
*	To unsubscribe from this group, send an email to:
lpc2000-unsubscribe@yahoogroups.com
<mailto:lpc2000-unsubscribe@yahoogroups.com?subject=Unsubscribe> 
  
*	Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/>  Terms of Service.