Many thanks!
I gonna search one...
What do you think about these ones??
http://www.ebay.fr/itm/131455488221?_trksid=p2060353.m1438.l2648&ssPageName=STRK%3AMEBIDX%3AIT
To: ;
Subject: Re: [oberheim] matrix 6 L3 IF coil transformer replacement???
Sent: Sat, Jan 30, 2016 4:10:46 AM
That is a variable inductor, listed on the schematic as variable
between 3 uH and 7 uH. It is not a transformer, even though it
may look like an IF transformer.
Are you sure the old one is bad?
A quick search on the web makes me think you will have trouble
finding an exact replacement. Inductors add in series, so if you can find
a slightly smaller one, then you could add a fixed inductor to it to
get the value that you need. You need to be able to hit a specific oscillator
frequency by adjusting the tuning slug, as described in the service
manual.
Probably the easiest would be to get one off of a junk M6 or M6R board.
Bob
--------------------------------------------
On Fri, 1/29/16, thomas boichard yoggybeats@... [oberheim] wrote:
Subject: [oberheim] matrix 6 L3 IF coil transformer replacement???
To: oberheim@yahoogroups.com
Date: Friday, January 29, 2016, 7:36 PM
hi!
my
component L3 is dead (an IF coil transformer)if you got
infos that can help me to find another one, it would be
dope!!!
mny thanks!
Tom/
ps: it looks like this:http://www.electrojumble.org/PICS-2/L427.jpg
View
on www.electrojumble.orgPreview
by Yahoo