OBERHEIM SYNTH group photo

Yahoo Groups archive

OBERHEIM SYNTH

Index last updated: 2026-04-28 23:39 UTC

Thread

Matrix1000 filter issue

Matrix1000 filter issue

2005-10-10 by Tomislav Stimac

Hi,

I need to align the filter on the 6th voice. Anyone knows where i can
get service manual online ?

Here is a brief explanation of the problem:
Let's say i put full reso, turn off oscillators and put cutoff to some 
point. I switch voices to Rotate. Five voices will trigger the filter
on the same point, but sixth will trigger it a little bit below, for
aproximate 15 units (which is too much for "analog feel"). I tried
both calibrate and reset functions - no help. I guess one of the
filters needs to be re-adjusted.

Did anyone had similar issues with Matrix? I also noticed that voice 1
has lower volume level from others, but it ain't a big deal like the
filter problem.

Thanks in advance!
Tom

Re: [oberheim] Matrix1000 filter issue

2005-10-12 by akira honda

Hi Tomislav,
I guess your 6th voice is bad... i had the same problem and i first identify the voice and then i swap the CEM3396 with another voice and then i did the automatic calibration, but the problem was the same ... i choose to replace the CEM3396 and the problem gone..
hope this works for you..
regards,


Tomislav Stimac wrote:
Show quoted textHide quoted text
Hi,

I need to align the filter on the 6th voice. Anyone knows where i can
get service manual online ?

Here is a brief explanation of the problem:
Let's say i put full reso, turn off oscillators and put cutoff to some
point. I switch voices to Rotate. Five voices will trigger the filter
on the same point, but sixth will trigger it a little bit below, for
aproximate 15 units (which is too much for "analog feel"). I tried
both calibrate and reset functions - no help. I guess one of the
filters needs to be re-adjusted.

Did anyone had similar issues with Matrix? I also noticed that voice 1
has lower volume level from others, but it ain't a big deal like the
filter problem.

Thanks in advance!
Tom



Yahoo! Music Unlimited - Access over 1 million songs. Try it free.

Re: [oberheim] Matrix1000 filter issue

2005-10-12 by akira honda

i forgot to include some links where you can get the CEM3396 if you need it.


Tomislav Stimac wrote:
Hi,

I need to align the filter on the 6th voice. Anyone knows where i can
get service manual online ?

Here is a brief explanation of the problem:
Let's say i put full reso, turn off oscillators and put cutoff to some
point. I switch voices to Rotate. Five voices will trigger the filter
on the same point, but sixth will trigger it a little bit below, for
aproximate 15 units (which is too much for "analog feel"). I tried
both calibrate and reset functions - no help. I guess one of the
filters needs to be re-adjusted.

Did anyone had similar issues with Matrix? I also noticed that voice 1
has lower volume level from others, but it ain't a big deal like the
filter problem.

Thanks in advance!
Tom



Yahoo! Music Unlimited - Access over 1 million songs. Try it free.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.