Re: [PolySix] Re: Voices not working
2012-08-31 by Peter Mörck
Perhaps it s a good idea to check supply voltages. ... From: tonezone020 To: PolySix@yahoogroups.com Sent: Friday, August 31, 2012 7:38 PM Subject: [PolySix]
Messages
Browse messages
Page 49 of 114 · 5658 messages matched
Re: [PolySix] Re: Voices not working
2012-08-31 by Peter Mörck
Well, it pretty much sounds like you ve narrowed it down to those 4 chips then. Though I would be worried as to why two voices were killed like that. BR, Peter
Re: Voices not working
2012-08-31 by tonezone020
Hi Peter. I took the best pair (SSM2044+SSM2056) and placed them in different slots - slots are fine. I then placed the 2 broken 2044s with the best 2056 -
Re: [PolySix] Re: Voices not working
2012-08-31 by Peter Mörck
Hi, Are you sure both the 2044 and 2056 are dead for both of the dead voices? I mean, have you swapped only one with a working voice and verified that the
Re: Voices not working
2012-08-31 by tonezone020
Hi, I swapped both the SSM2044s and 2056s around for the dead voices and found that all 4 aren t working. Following on, the remaining SSM2044s have differing
Re: [PolySix] Voices not working
2012-08-31 by Bandit
SSM 2044 ? ________________________________ From: tonezone020 To: PolySix@yahoogroups.com Sent: Friday, August 31, 2012 2:06 AM
Voices not working
2012-08-31 by tonezone020
Hi All, Got a Polysix I ve been working on and voices 1 and 3 are not sounding. The leds show they re being triggered. Any suggestions would be greatly
RE: [PolySix] Re: Polysix tact switch.
2012-08-19 by philippe.69
original for sale here http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=320966335753 De : PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] De la part
Re: [PolySix] Polysix Legacy factory patches?
2012-08-19 by Russell Duce
I m using the scanned copies of the Factory Patches hosted in the files section (thanks to the uploader/scanner!) but no matter how many times I try and double
Re: Polysix tact switch.
2012-08-17 by syntegrator
Hey everyone,. I ve made and posted a few videos to the Syntegrator channel on this topic now that the parts arrived:
Re: [PolySix] Re: introduction and program/bank problems
2012-08-17 by Jed Jorgensen
New PCBs are available here: https://sites.google.com/site/jedjorgensen/ Best regards, Jed ... [Non-text portions of this message have been removed]
Re: [PolySix] Polysix Legacy factory patches?
2012-08-17 by Johannes Hausensteiner
Hi, A file converter program is easily made if you know the file formats. The information seems not to be available for the VST .fx[b,p] files. But I believe
Re: introduction and program/bank problems
2012-08-17 by raisinbag69
Right on! Thanks, that is a great starting point. After I posted this message, I read late into the night and followed all the links I could find. I will
Re: introduction and program/bank problems
2012-08-17 by tonezone020
Hi, This forum really helped me - I finally fixed mine yesterday. Curiously, one of the hurdles was the connectors to the 367 board, despite the fact that they
Re: [PolySix] Polysix Legacy factory patches?
2012-08-17 by Mike
I thought all the factory patches were shown at the back of the user manual. Maybe you could recreate them that way? Sent from my Apple ][e ... [Non-text
Polysix Legacy factory patches?
2012-08-17 by potophan2006
Hi there,I must apologize in advance for the length of this email. I know it may be a long shot, but does anyone happen to know if the original Polysix factory
introduction and program/bank problems
2012-08-17 by raisinbag69
Hey there, I m new here. I normally spend lots of time at Muff s but figured I should come here for help from the poly 6 pro s. My baby has been working fine
Almost there...
2012-08-15 by tonezone020
Everything is now working - Patch Save and Recall is fine. Tape loads and verifies. The last piece in the jigsaw is the Release control which now does nothing.
Re: Patch Recall Wierdness
2012-08-14 by tonezone020
Hi All, I ve noticed the last resistor in the R15 array measures 5.7k. Could this be the culprit? It leads to IC2. Regards, Tony
Re: [PolySix] Re: Polysix tact switch.
2012-08-14 by Roman Sowa
Poly 61 uses different switches, with square thingies peeking out, and the plastic Korg key is pushed on it. The part name is Omron B3F-5050, but the square is
Re: [PolySix] Patch Recall Wierdness
2012-08-14 by Roman Sowa
hi, maybe one of the data lines in memory chip is pulled high by some solder joint or simply damaged. I m talking about pins 11 to 14 of IC32 (TC5514). The
Patch Recall Wierdness
2012-08-14 by tonezone020
Hi ... Finally got all buttons and controls working - everything seems fully functional. The problem is recalling patches. It seems that whatever parameters
Re: [PolySix] Re: front panel and ring mod-ish weirdness
2012-08-12 by klosmon
Hola Eric -- When the front panel switches aren t responding, first check the four ICs that handle these functions. On the KLM-367 schematic, they are ICs 28,
Re: front panel and ring mod-ish weirdness
2012-08-12 by eframp1
There s no change, and the LFO modulates (as of right now only) VCF cutoff at a separate (and changeable) frequency than this sort of ring-mod thing I m
front panel and ring mod-ish weirdness
2012-08-12 by Eric Frampton
Hi all - I ve just finished doing the standard battery damage control on my PolySix, but some weird things are happening. On this machine, it was far enough
Re: Restored Polysix acting out. Help !
2012-08-12 by marcomir27
I ve checked inside and re-ajusted a few connectors (including CN10). So far, it seems to have fixed the problem. I ll keep a close on eye on the patient and
Re: Broke the IC-26 chip on the KLM-367 board
2012-08-12 by daryl88music
I forgot to mention that one pin is completely discontinued from the IC so there is no way to resolder it...
Re: front panel and ring mod-ish weirdness
2012-08-12 by tonezone020
Hi, If you set the Delay and Level to zero does the ring mod change ? Btw, I m in London, where are you based ? Regards, Tony
Re: [PolySix] Re: Broke the IC-26 chip on the KLM-367 board
2012-08-12 by Troels Jørgensen
Can t you just solder the leg back on? Would be alot easier than desoldering, putting in a socket and a new ic.. Sendt fra min iPhone ... [Non-text portions of
Re: Broke the IC-26 chip on the KLM-367 board
2012-08-12 by daryl88music
Hey, Thx for the replies, My polysix doesn t store patches anymore. I heard it might be a problem with IC-32 chip. So I was trying to cut off all the pins from
Re: [PolySix] Broke the IC-26 chip on the KLM-367 board
2012-08-12 by Mike
It s a 4042BP eBay 4042BP IC or 4042B IC $2 Sent from my Apple ][e ... [Non-text portions of this message have been removed]
Re: Broke the IC-26 chip on the KLM-367 board
2012-08-12 by tonezone020
Hi, How do you mean broke ? I believe Digikey part 296-2049-5-ND or Farnell no. 1470893 will work...
Broke the IC-26 chip on the KLM-367 board
2012-08-12 by daryl88music
Hi, Anyone know where I can find a replacement for this IC-26 on the KLM-367 chip. Here s what is written on it: 2G3 4 HD14042BP Thanks!
Re: [PolySix] Restored Polysix acting out. Help !
2012-08-11 by The Old Crow
This sounds like the reset threshold trimmer (VR1) needs a small tweak. Crow /**/
RE: [PolySix] Restored Polysix acting out. Help !
2012-08-11 by backshall1
Sounds like maybe a loose cable (CN10) between the KLM-367 and the patch buttons board. Don B. _____ From: PolySix@yahoogroups.com
Restored Polysix acting out. Help !
2012-08-11 by marcomir27
Hello, I need help with my Polysix. Here s the symptoms : 1) All LEDs are staying on after power-up (tape is disabled); OR 2) Everything is fine, but after
Re: Warming up and tuning stability
2012-08-11 by tonezone020
I think 8 should be one octave - at least that s the case for me... Maybe look at the mechanism and see if anything has shifted. Regards Tony
Re: Warming up and tuning stability
2012-08-11 by Russ
Ha Ha, I m a bonehead! That was it Tony, thanks. That s what I get for posting while sleep deprived. There is so little center detent on my pitch wheel that I
Re: Warming up and tuning stability
2012-08-11 by tonezone020
Hi Russ, The pitch wheel is centre detented. If it s not in this position, you ll hear the bend amount affect the tuning. I assume that s what you meant...
Warming up and tuning stability
2012-08-11 by Russ
Hello, I recently got my P6 mostly working. I don t have a ton of experience with the P6 so I don t know exactly what to expect. I have a lovely replacement
Re: Polysix tact switch.
2012-08-09 by tonezone020
Ahh ... even better ! Cheers. T
Re: Polysix tact switch.
2012-08-09 by syntegrator
An update here for everyone... I did some correlating with the infamous Murray over at kiwitechnics.com (the company that is currently working on the Kiwisix
Re: [PolySix] Re: Polysix tact switch.
2012-08-09 by Mike
That s only about 20x as expensive as mouser! Sent from my Apple ][e ... [Non-text portions of this message have been removed]
RE: [PolySix] Re: Polysix tact switch.
2012-08-09 by philippe.69
Hello the switch on sale here http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=320957868876&ssPageName=ST RK:MESELX:IT&_trksid=p3984.m1586.l2649 De :
Re: Polysix tact switch.
2012-08-09 by tonezone020
Cool Syntegrator, I found your series on the Juno really helpful. Regards, Tony
Re: Polysix tact switch.
2012-08-09 by syntegrator
Tony, Thanks very much from me too for this information - I ve been looking for a Mouser/Digikey/Farnell part number for these switches for a while now. I ll
Re: [PolySix] Re: Polysix tact switch.
2012-08-09 by Mike
Legend! Thanks! Sent from my Apple ][e ... [Non-text portions of this message have been removed]
Re: Polysix tact switch.
2012-08-09 by tonezone020
Hi Mike, I believe the OMRON B3F 4000 are perfect for the job... Mouser 653-B3F-4000 Best wishes, Tony
Polysix tact switch.
2012-08-09 by Mike
... Does anyone know the model of tact switch used in the polysix and poly 61? I m guessing a C&K switch, but a mouser part number would be great. (I m
Re: Dead keys......
2012-08-07 by David Davis
Well, I fixed my dead keys - turned out the yellow 16-way cable and connector were fine, but there was a dry joint on the D0 line, on the keyboard PCB, between