Re: [Digital BW] 2200 USB "communication error"
2004-09-23 by sinwen
Did you change paper ? It seems to me like the printer is not driving the paper correctly, rollers ? motor ? It is mechanical not software nor connection.
Show quoted textHide quoted text
----- Original Message -----
From: Hogarth Hughes
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Sent: Thursday, September 23, 2004 10:21 PM
Subject: [Digital BW] 2200 USB "communication error"
I normally print B&W on a 7600. The PC (win2k) communicates to it over
Ethernet. But I've got a tiny bit of color work to do, so I borrowed a
2200 printer. My only choices for connecting to it are parallel or USB,
so naturally I picked on USB.
I spent a couple of days getting it installed, what with OS upgrades
(win2k, fully patched), loading the driver from the Epson website, doing
the funny little dance if you have a certain "hot fix" patch installed,
etc. But, I got it to work. It's been printing fine for a couple of weeks.
Today it printed fine too, for a while. Then I switched images. When I
tried to print this image, the first time it got half way through and
quit. No errors. Nothing in the event log. It left no clues. Second try,
same thing. It got about half an inch farther along this time.
I played with the USB cable (plug and unplug), rebooted the printer and
the computer. Now when I try to print from Photoshop, I get a
"communication error" pop-up. Still nothing in any of the logs to give
me a clue as to what is actually wrong.
Finally, I deleted the printer and did a reinstall of the printer
driver. Same symptom.
I've run through all my ideas. Would any of you 2000 / windows / USB
users please tell me what you think could be causing this?
--
Hogarth Hughes
Please visit the Group Homepage to check the Files, and other resources as they are often being updated.
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page.
Please follow these basic guidelines:
- As threads develop, trim off excess portions of earlier messages to keep them short.
- Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice.
- Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership.
- By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See "Group Topic, Rules and Guidelines" in the Files section:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP.
Yahoo! Groups Sponsor
ADVERTISEMENT
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/
b.. To unsubscribe from this group, send an email to:
DigitalBlackandWhiteThePrint-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]