Yahoo Groups archive
Messages
Page 26 of 564 · 28179 messages matched
2016-04-07 by Florian Anwander
Am 07.04.2016 um 12:21 schrieb yahoo@doepfer.de [Doepfer_a100]: > But the output level of gate and trigger signals should be at least 5V from my point of view. Agreed!
2016-04-07 by yahoo@doepfer.de
> Hello Dieter > > Am 07.04.2016 um 11:49 schrieb yahoo@doepfer.de [Doepfer_a100]: > > I had a discussion with other module manufacturers during the Superbooth and > > we think about an expansion of the eurorack standard that includes also specs like minimum trigger length (1 ms
2016-04-07 by Florian Anwander
Hello Dieter Am 07.04.2016 um 11:49 schrieb yahoo@doepfer.de [Doepfer_a100]: > I had a discussion with other module manufacturers during the Superbooth and > we think about an expansion of the eurorack standard that includes also specs like minimum trigger length (1 ms or 5ms are
2016-04-07 by yahoo@doepfer.de
> Yes Dieter, > > Gutemorgen :-) ... Exactly that's what I didn't pay attention to. > The pulsewidth.... > But because all other clockmodules responded well to that same pulse. > > Thanks the wakeupcall. > > Jacco Ville It has to do with the fact that the A-157 has a microcontrol
2016-04-07 by Jacco Ville
Yes Dieter, Gutemorgen :-) ... Exactly that's what I didn't pay attention to. The pulsewidth.... But because all other clockmodules responded well to that same pulse. Thanks the wakeupcall. Jacco Ville Verstuurd vanaf mijn iPhone 5 Black OPS Edition Op 7 apr. 2016 om 10:45 heeft
2016-04-07 by yahoo@doepfer.de
> Hi there Doepfer techs, > > Yesterday I received my second A157 and after installing I did a testrun. > With an LFO using for clock it worked very well. > However using the internal clock output from one of my A154's the A157 didn't respond. > Is this due to a too low sensitivi
2016-04-07 by Jacco Ville
Hello Florian, Yes, the front output from the A154 feed from it's internal clock. Once I noticed that the A157 wasn't responding, although sometimes just one step, I verified the A154's clock output with my other A154 input and even the A160-1 and A160-2 which worked flawlessly.
2016-04-07 by Florian Anwander
Hello Jacco Am 07.04.2016 um 08:29 schrieb jaccoville@yahoo.com [Doepfer_a100]: > However using the internal clock output from one of my A154's the A157 didn't respond. > Is this due to a too low sensitivity of the A157 clock input? What do you mean with the A-154s "internal cloc
2016-04-07 by jaccoville@yahoo.com
Hi there Doepfer techs, Yesterday I received my second A157 and after installing I did a testrun. With an LFO using for clock it worked very well. However using the internal clock output from one of my A154's the A157 didn't respond. Is this due to a too low sensitivity of the A1
2016-04-06 by cam1_uk@yahoo.co.uk
Thanks Dieter :)
2016-04-05 by jaccoville@yahoo.com
LOL ....yes I must be a very happy customer in the end
2016-04-05 by Florian Anwander
Am 05.04.2016 um 16:15 schrieb jaccoville@yahoo.com [Doepfer_a100]: > ...(and ordered a second A157 set to satisfy my triggerneeds ) ;-) This is one of the coolest marketing tricks I've ever heard of: Send the customer one order with wrong content -> get a second order from the c
2016-04-05 by jaccoville@yahoo.com
Done! ...(and ordered a second A157 set to satisfy my triggerneeds ) ;-)
2016-04-05 by yahoo@doepfer.de
> Hello Dieter, > > Mistakes happen.... > I really appreciate your fast action to solve this mistake. > > I ordered from Thomann. > I am located in Holland. Please contact our sales department directly (sales@doepfer.de). They will arrange the exchange of the modules provided tha
2016-04-05 by Jacco Ville
Hello Dieter, Mistakes happen.... I really appreciate your fast action to solve this mistake. I ordered from Thomann. I am located in Holland. Verstuurd vanaf mijn iPhone 5 Black OPS Edition Op 5 apr. 2016 om 15:02 heeft yahoo@doepfer.de [Doepfer_a100] het volgende geschreven: >>
2016-04-05 by yahoo@doepfer.de
> And yes, it's here the A157 ...but.... > > It's not complete unfortunately. > A157-1 check > A157-2 twice(?) > A157-3 not here > > Someone got an A157-3 twice? I'm very sorry about this mistake. Where did you order the modules and where are you located ? Maybe we can correct th
2016-04-05 by jaccoville@yahoo.com
And yes, it's here the A157 ...but.... It's not complete unfortunately. A157-1 check A157-2 twice(?) A157-3 not here Someone got an A157-3 twice?
2016-04-05 by Jacco Ville
Thank you Dieter, I will. Jacco Ville Verstuurd vanaf mijn iPhone 5 Black OPS Edition > Op 5 apr. 2016 om 09:48 heeft yahoo@doepfer.de [Doepfer_a100] het volgende geschreven: > > Please contact Christian Assall (software@doepfer.de). > > Best wishes > Dieter Doepfer > > >> -----U
2016-04-05 by yahoo@doepfer.de
> Hi All > > > Sorry to be resurrecting such an old thread but I can't find any more recent discussion on this topic elsewhere. I am > also experiencing this bleed issue in both VCAs, like others worse in EMP mode, but still there in Lin mode. It is V2 > with the SSM2164. Looking
2016-04-05 by yahoo@doepfer.de
> Have a bit of an issue whereby when I use the USB port the note will "lock" and repeat which creates something similar to > feedback on a delay pedal. With the direct midi inputs it works fine. I have firmware 1.03 and the update may alleviate > this issue but I can't find wher
2016-04-05 by yahoo@doepfer.de
Please contact Christian Assall (software@doepfer.de). Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] > Gesendet: Dienstag, 29. März 2016 23:23 > An: Doepfer_a100@yahoogroups.com > Betreff:
2016-04-05 by thomas_escure@yahoo.fr
Once again, thank you very much : this .cdr file made my day ! Regards, Thomas
2016-04-05 by yahoo@doepfer.de
Please look at our website: www.doepfer.com > PRODUCTS > Module overview (pictures) > A100_System.cdr Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] > Gesendet: Sonntag, 3. April 2016 22:43
2016-04-04 by Jacco Ville
Hi there, Where can I find a link and instructions for downloading an update for my A190-4 ? Thank you. Jacco Ville Holland Verstuurd vanaf mijn iPhone 5 Black OPS Edition
2016-04-04 by thomas_escure@yahoo.fr
Thank you for your replies. About measuring : unfortunately I have a hard time trying to be sure about the exact distances. What's sure is that it has to be more precise than half a millimetre. I do not have tools that are precise enough. About scanning and rescaling... I could d
2016-04-04 by cam1_uk@yahoo.co.uk
Have a bit of an issue whereby when I use the USB port the note will "lock" and repeat which creates something similar to feedback on a delay pedal. With the direct midi inputs it works fine. I have firmware 1.03 and the update may alleviate this issue but I can't find where/how
2016-04-04 by Analog Monster
You could even use a scanner, rescale the image so the dimensions of the panel are consistent with real life (if not already to scale), then trace on a different layer and eventually remove the original image leaving just the trace. Print and compare to real life. I've done this
2016-04-04 by achtung_999
ehmmm maybe a stupid remark, but since you have the module yourself: measure maybe? On Mon, Apr 4, 2016 at 1:33 PM, thomas_escure@yahoo.fr [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Thank you Stuart for your reply. I've used Schaeffer services several times too, but wha
2016-04-04 by thomas_escure@yahoo.fr
Thank you Stuart for your reply. I've used Schaeffer services several times too, but what I need is an exact info for the placement of jacks and pots holes. I would not like to make something approximate, as I don't want to stress the solder joints while screwing the electromecha
2016-04-04 by Stuart Walker
Hi Schaeffer AG have ‘Front Panel Designer’. You just design the panel yourself, send the file and a great panel comes back. I have used this a dozen times and it’s great. Regards Stu From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Sent: 03 April 2016 21:
2016-04-03 by maltemark@gmail.com
Hello group, This is not a very specific question, but as I've been doing some of the mods suggested by navs on a few Döpfer modules (a-136, a-171-2 etc) I was thinking of creative uses for the a-137-2, which I've been thinking of letting go, and the thought struck me that someon
2016-04-03 by thomas_escure@yahoo.fr
Hello, As I'm modifying my A-176s more and more, I will have to replace the faceplates. Is there anybody who I could ask for a template for making my own panel ? What I need exactly is the placement of the holes for jacks and pots. Thank you in advance, Regards, Thomas
2016-03-30 by jaccoville@yahoo.com
Yes! Ordered the A157 last week. Finally it's there....now the Xmastree may be burned. Hopefully Thomann will deliver soon. I am triggerhappy:-) Greetz, Jacco Ville Holland
2016-03-30 by florian anwander
Hi Am 30.03.2016 um 22:14 schrieb Bakis Sirros synth_freak_2000@yahoo.com > and the A157-1/2/3 are now available! And it is great. I ordered the 157 system immediately. And - though the firm ware still is quite basic - I am really happy. I do a lot triggering based music, and the
2016-03-30 by Bakis Sirros
in case you have not noticed: http://www.doepfer.de/home_e.htm and the A157-1/2/3 are now available!
2016-03-30 by gleesonalan@yahoo.ie
Hi Zoe This problem is in relation to the discussion in this thread. The issue I have is not uncommon. I am not overloading the input, there is just bleed when the gain is turned down, more in the top VCA than the bottom one. From what I understand EXP mode will always bleed a ce
2016-03-30 by Zoë Blade
Bleedthrough from one of the VCAs to the other, or just each one not fully closing? Because I thought I had the latter issue, but it turned out I had the input gain / sensitivity set far too high on my breakout box's input. D'oh! Sorry if it's a far more advanced problem. I just
2016-03-30 by gleesonalan@yahoo.ie
Hi All Sorry to be resurrecting such an old thread but I can't find any more recent discussion on this topic elsewhere. I am also experiencing this bleed issue in both VCAs, like others worse in EMP mode, but still there in Lin mode. It is V2 with the SSM2164. Looking at the back
2016-03-29 by jaccoville@yahoo.com
Hi there, Is there a link for getting my a190-4 updated? Greetz, Jacco Ville Holland
2016-03-24 by Bakis Sirros
for sale in fine working condition: Makenoise Erb-Verb (price is 412 euros including pp fees and shipping) Makenoise Wogglebug V.1 (price is 170 euros including pp fees and shipping) Makenoise Function (price is 125 euros including pp fees and shipping) payment via paypal, thanks
2016-03-18 by yahoo@doepfer.de
A-111-2: triangle core: yes frequency range: ~ 14-15 octaves waveforms: tri, saw, pulse, sine linear FM: yes (manual control, down to ~zero + CV input with attenuator) exponential FM: yes (manual control + CV input with attenuator) PWM: yes (manual control + CV input with attenua
2016-03-18 by Bakis Sirros
New High-End VCO...wow! will it be triangle core? i guess it will include linear and exp FM, TZ FM of course. will it have an on-board wave folder ? will it have an on-board modulation (2nd) vco ? From: "yahoo@doepfer.de [Doepfer_a100]" To: Doepfer_a100@yahoogroups.com Sent: Frid
2016-03-18 by yahoo@doepfer.de
I'll see if that's possible. But at the moment I'm snowed under with work because I have to prepare for the Superbooth in Berlin. The prototypes of a few new modules have to be finished (e.g. a new high end VCO, a micro VCO with 4HP only and a performance mixer). Best wishes Diet
2016-03-17 by james.husted@mac.com
Dieter - The A-152 is a bit of a specialty module for sure. To many the features are very obscure. I imagine that most people mainly use the Digital outs and not many use the other columns very much. For me that is the case anyway. The Voltage addressable digital outs is a vert c
2016-03-17 by Bakis Sirros
hi all, want to buy, from Greece only: Makenoise DPO module Elektron Machinedrum from Greece only, because of the capital controls. payment via paypal thanks for the bandwidth best regards, Bakis.
2016-03-15 by neal@neallayton.co.uk
That's very helpful advice regarding the potentiometer size , thanks again for your time! Best wishes, Neal
2016-03-15 by yahoo@doepfer.de
No problem ! We are totally snowed under with work and I'm happy if there is also another solution available. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] > Gesendet: Dienstag, 15. März 20
2016-03-15 by Jonathan
I would not wish to take any sales away from Dieter because his stuff is fabulous, but there are of course many others out there following in his footsteps and making modules. For a series of fully "modularised" sequencer modules (!) take a look at the 'S' series from www.ladik.e
2016-03-15 by yahoo@doepfer.de
Hello James, thank you for the detailed annotation. If there are sufficient inquiries we could develop such an expansion unit. But I fear that this application is a bit too special (generally the A-152 is far a way from being a good seller) Best wishes Dieter Doepfer > -----Urspr
2016-03-15 by yahoo@doepfer.de
Yes, this circuit should work. But I'd reduce the value of the potentiometers a bit (e.g. 10k) to obtain a more linear control behaviour. A 100k potentiometer with a 100k load (typical load value) has a very non-linear control scale. With a 10k pot that's much better. Of course t