Yahoo Groups archive
Messages
Page 35 of 564 · 28179 messages matched
2015-07-23 by yahoo@doepfer.de
> Dieter, > > > Would you consider licensing the sub-system design to a smaller manufacturer who could produce updated boards (perhaps > using the new parallel version of Cliff sockets, SSM2164, etc) for a DIY project? > > I nearly asked permission to build that member the A-129-
2015-07-23 by yahoo@doepfer.de
> Hi to all of you, > > I’m looking to replace the victors in my Doepfer A-010-2 Low Pass Gate, in order to get the longer ringing sound of > Buchla gear. Would the VTL5C3 be the right one to go for? > > Regards, > > Neil I think any vactrol will work in principle. But the vactro
2015-07-22 by Neil Kagan
Hi to all of you, I’m looking to replace the victors in my Doepfer A-010-2 Low Pass Gate, in order to get the longer ringing sound of Buchla gear. Would the VTL5C3 be the right one to go for? Regards, Neil
2015-07-22 by Nicholas Keller
Dieter, Would you consider licensing the sub-system design to a smaller manufacturer who could produce updated boards (perhaps using the new parallel version of Cliff sockets, SSM2164, etc) for a DIY project? I nearly asked permission to build that member the A-129-5 that they're
2015-07-22 by Sean Ellis
All the early MAM units had terrible quality pots, I have every one of their rack units and all needed replacement pots. Managed to get 4 MB-33s in an ebay sale as 'non functioning'. All had completely broken pots, like wipers not making any contact at all. Yikes. > To: Doepfer_a
2015-07-22 by istari lasterfahrer
Hi i still have the VF-11, it has a voice/unvoice detector. my machine does pot crackling all over the place, i was also looking for another vocoder option which is more open then the most available. for eurorack there are maybe more options by now, the 4ms spectral filter or the
2015-07-22 by acgenerator@att.net
which power supply on the g6 cases?
2015-07-21 by Florian Anwander
On 21.07.15 20:57 , james.husted@mac.com [Doepfer_a100] wrote: Otherwise a perfect saw would sound exactly the same as any other perfect saw. When people say a certain VCO is fatter sounding or smother sounding or any other descriptor that is used to differentiate one VCO from an
2015-07-21 by Isolde Isobelle
Could not have put it better myself. Think CS80, consider Mini Moog... all with character and ''imperfect'' wave forms. The search for perfection is pointless. On 21 July 2015 at 19:57, james.husted@mac.com [Doepfer_a100] Doepfer_a100@yahoogroups.com >; wrote: ALL electronic musi
2015-07-21 by Florence Michel
Hello im interesed by your A-123 and A-126 they are always available please ,? Thank you 2015-07-21 20:59 UTC+02:00, dmichaelt2001@yahoo.com [Doepfer_a100] : > Hello Doepfer Group, > > I have a number of Doepfer modules and cases for sale. Other interests are > keeping me > > occ
2015-07-21 by dmichaelt2001@yahoo.com
Hello Doepfer Group, I have a number of Doepfer modules and cases for sale. Other interests are keeping me occupied so it's time for this equipment to find a new home (or homes). All modules are in excellent condition and prices are in Canadian dollars. I don't check the group re
2015-07-21 by james.husted@mac.com
ALL electronic music VCO’s have some distortion somewhere. To completely remove those distortions would raise the cost so much that people would not probably buy them. Also it is hard to remove some distortions over the total range of the VCO too. The most typical distortion is o
2015-07-21 by christian ienni
hmmm.... "Limited-Edition Ferrari-branded Dopefer modules".... might be on to something there.... ;-) From: "yahoo@doepfer.de [Doepfer_a100]" To: Doepfer_a100@yahoogroups.com Sent: Tuesday, July 21, 2015 6:38 AM Subject: AW: [Doepfer_a100] Vocoder And it's not a Ferrari where 4 u
2015-07-21 by christian ienni
"...waaay back in maybe the late 90s, early 00s.." how did "the late 90s" become "waaay back" when i wasn't looking? feelin' *really* old now! ;-) From: "Zoë Blade zoe@bytenoise.co.uk [Doepfer_a100]" To: Doepfer_a100@yahoogroups.com Sent: Tuesday, July 21, 2015 7:21 AM Subject: R
2015-07-21 by Zoë Blade
Well I have the A-100 vocoder subsystem and have been known to make related videos on YouTube... just as soon as I get enough wires, I could make a demo of it if it would help gauge if people really would be interested, they just don't know about it?
2015-07-21 by Zoë Blade
Heh, I used to have a MAM VF-11 waaay back in maybe the late 90s, early 00s... I don't remember it having a voiced/unvoiced detector or slew though. Still, it was a pretty nice device, much better than their FB-383. These days, most people presumably use plug-ins though for these
2015-07-21 by Florence Michel
The vocoder system is a very good idea, I think the problem is that it is not well copnnu the general public, video demos would certainly make a popular system as a René or Braids 2015-07-21 15:49 UTC+02:00, Zoë Blade zoe@bytenoise.co.uk [Doepfer_a100] : > Oh totally, I would hav
2015-07-21 by Florian Anwander
Am 21.07.2015 um 15:49 schrieb Zoë Blade zoe@bytenoise.co.uk [Doepfer_a100]: > Oh totally, I would have thought a 1U version with just carrier, modulator and unvoiced noise in, result out, and a slew knob and switch, would have been even more popular... You may think about, why t
2015-07-21 by Zoë Blade
Oh totally, I would have thought a 1U version with just carrier, modulator and unvoiced noise in, result out, and a slew knob and switch, would have been even more popular... but then again, I still can't believe the MCV-24 isn't more popular, so maybe I'm not very representative
2015-07-21 by Florian Anwander
Am 21.07.2015 um 15:38 schrieb yahoo@doepfer.de [Doepfer_a100]: > And of course a DSP solution would also be cheaper. But that's not > what we want to offer. A DSP-Solution is always delaying the modulator signal. So you can't use it for realtime modulation by drums (which is a v
2015-07-21 by yahoo@doepfer.de
> It makes total sense from an economical point of view. It's just frustrating that the vocoder subsystem (and a few other > modules) weren't more popular. They're really neat! > > Still, it says something good about the A-100 when you can say that "only" selling 100 units is con
2015-07-21 by Zoë Blade
It makes total sense from an economical point of view. It's just frustrating that the vocoder subsystem (and a few other modules) weren't more popular. They're really neat! Still, it says something good about the A-100 when you can say that "only" selling 100 units is considered
2015-07-21 by yahoo@doepfer.de
> Hi all > > > Surely I can't be the only person who mourns the lake of a vocoder system on Doepfer. > Is there ANY chance of the modules being reissued? > > I am desperate! > > Stu The vocoder has been stopped because of the poor sales. Of course we could manufacture the vocoder
2015-07-21 by swalker@fraserwalkerltd.co.uk
Hi all Surely I can't be the only person who mourns the lake of a vocoder system on Doepfer. Is there ANY chance of the modules being reissued? I am desperate! Stu
2015-07-21 by Neil Kagan
Sounds ideal! If you can keep within the same hp width even better :) Neil Sent from my iPhone > On 21 Jul 2015, at 11:33, yahoo@doepfer.de [Doepfer_a100] wrote: > > > Hi Dieter, > > > > What improvements or additions do you have planned for the A-111 update? I'd love to see CV c
2015-07-21 by yahoo@doepfer.de
> Hi Dieter, > > What improvements or additions do you have planned for the A-111 update? I'd love to see CV controlled waveshaping if > that was possible? > > Regards, > > Neil It's far to early to speak about details. The idea is a triangle core with the precision of the A-111-
2015-07-21 by vladoman@gmail.com
Thanks for the explanation.
2015-07-21 by Neil Kagan
Hi Dieter, What improvements or additions do you have planned for the A-111 update? I'd love to see CV controlled waveshaping if that was possible? Regards, Neil Sent from my iPhone
2015-07-21 by Florian Anwander
Hello > it happens as well at lower frequencies Of course it does happen at lower frequencies, but it is much more visible at high frequencies and it will have a deeper impact soundwise. Florian
2015-07-21 by Vladimir Pantelic
it happens as well at lower frequencies On Jul 21, 2015 10:12 AM, "Florian Anwander fanwander@mnet-online.de [Doepfer_a100]" Doepfer_a100@yahoogroups.com > wrote: Hello, judging the time scale of the scope the VCO is running at a very high frequency (~20kHz). In this case you wil
2015-07-21 by yahoo@doepfer.de
> Hello, > > looking at the triangle wave of the 110-2, there is a glitch at the end which gives it quite an audible "buzz" on top of > the triangle sound. > > IMG_20150709_174337.jpg > > IMG_20150709_174337.jpg > View on drive.google.com Preview by Yahoo > > is there a way to ca
2015-07-21 by Florian Anwander
Hello, judging the time scale of the scope the VCO is running at a very high frequency (~20kHz). In this case you will see the resetpulse of the comparator/transistor circuit. You will find that at many VCOs. The most famous is the VCO of the Yamaha VCO chip: http://www.cs80.com/
2015-07-21 by Neil Kagan
I would think that what you are seeing is still the result of a Sawtooth being wave shaped into a triangle. I imagine Dieter will know why this is the case, in terms of how it differs from the 110-1. > On 21 Jul 2015, at 08:34, vladoman@gmail.com [Doepfer_a100] wrote: > > Hi, > >
2015-07-21 by vladoman@gmail.com
Hi, no the 110-1 is different, on the 110-1 there is a glitch at the peak of the triangle and this one is way less audible than this glitch at the bottom of the triangle on the 110-2. see the linked picture: IMG_20150709_174337.jpg IMG_20150709_174337.jpg View on drive.google.com
2015-07-21 by Neil Kagan
The A-111-1 is a triangle core if that helps Sent from my iPhone > On 21 Jul 2015, at 07:29, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] wrote: > > It's the same on the 110-1. The VCO core is a sawtooth I believe, and uses wave shaping to get the other shapes. The old versio
2015-07-21 by Neil Kagan
It's the same on the 110-1. The VCO core is a sawtooth I believe, and uses wave shaping to get the other shapes. The old version had a sine that had more distortion which is why I think it might have been removed. Your best bet would be to filter it out. Neil Sent from my iPhone
2015-07-21 by vladoman@gmail.com
Hello, looking at the triangle wave of the 110-2, there is a glitch at the end which gives it quite an audible "buzz" on top of the triangle sound. IMG_20150709_174337.jpg IMG_20150709_174337.jpg View on drive.google.com Preview by Yahoo is there a way to calibrate that away some
2015-07-17 by yahoo@doepfer.de
> > Most of the features of that module can be realized with current Doepfer modules, but I appreciate that's not what you > want to hear. > > > > A-119 for input, gain, comparator > > > > A-165 to invert/offset comparator output > > > > A-150 to switch between modulators > > > >
2015-07-16 by Nicholas Keller
Oh, I understood it to be level dependent, not frequency dependent. On Thursday, July 16, 2015, Zoë Blade zoe@bytenoise.co.uk [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Ah, so you *can* achieve this effect with other modules, but you'll need a filter in there? Thanks, t
2015-07-16 by Zoë Blade
Ah, so you *can* achieve this effect with other modules, but you'll need a filter in there? Thanks, this is getting really interesting. The A-129-5 had been a magic black box to me. It's nice to know a bit about how these things work, and yes, that kind of thing does sound replic
2015-07-16 by Florian Anwander
On 16.07.15 23:50 , Nicholas Keller maq163x2@gmail.com [Doepfer_a100] wrote: Correct me. OK :-) Functional explanation: A voiced/unvoiced detector checks whether there is some signal above a certain frequency, but no signal below this frequency. If both both conditions are given
2015-07-16 by Nicholas Keller
Well, I may be missing something as I don't have any vocoder modules. My understanding was that when there is no "speech" input, the A-129-5 module switches modulators. That is easily done with a comparator, ie. noise gate. Signals above a certain threshold flip the switch. I don
2015-07-16 by Zoë Blade
On 16 Jul 2015, at 20:25, Nicholas Keller maq163x2@gmail.com [Doepfer_a100] wrote: > Most of the features of that module can be realized with current Doepfer modules, but I appreciate that's not what you want to hear. > > A-119 for input, gain, comparator > > A-165 to invert/offs
2015-07-16 by Nicholas Keller
Most of the features of that module can be realized with current Doepfer modules, but I appreciate that's not what you want to hear. A-119 for input, gain, comparator A-165 to invert/offset comparator output A-150 to switch between modulators You're only missing the treble boost
2015-07-13 by Zoë Blade
> could someone please post step-by-step instructions on how to create a first patch of some kind? Bam! :D https://www.youtube.com/watch?v=VnoWQeEOSqo
2015-07-13 by Scott Rogers
Sure. Step 1: Cut up your credit card. This will save you thousands of dollars once you actually start creating sounds with this thing! TRUST ME!!! Step 2: The output comes from the Exponential VCA module. Audio Out jack. That can be plugged into your mixer. Step 3: Start simple.
2015-07-13 by George P. Macklin
Hello Jan, Start with the patch at the top of this page. http://www.doepfer.de/a100_man/a100_patch.htm Cheers, George P. Macklin www.granularmatter.com | Eurorack Modules | www.toppobrillo.com On Mon, Jul 13, 2015 at 9:28 AM, jgcorn@gmail.com [Doepfer_a100] Doepfer_a100@yahoogrou
2015-07-13 by jgcorn@gmail.com
Hi everyone, This is my first post to the group. I'm embarrassed to admit this: I got a new Basic System 2 sometime in March, it looks great and I have it connected properly (I think) to my MIDI interface, but I have yet to construct my first patch! I'm a bit intimidated by the w
2015-07-13 by Neil Kagan
Thanks Dieter :) Sent from my iPhone On 13 Jul 2015, at 16:24, yahoo@doepfer.de [Doepfer_a100] wrote: >> How can you tell? >> >> >> Neil > > a) looking at the front panel: the top right socket of each sub-unit has to be labelled "BP" instead of "HP" > b) all modules with a test s
2015-07-13 by syndromeda@telenet.be
Thanks anyway Dieter, it would be great. ------------------------------------------------------ Danny Budts info@syndromeda.be www.syndromeda.be https://www.facebook.com/Syndromeda https://syndromeda.bandcamp.com/ https://www.facebook.com/pages/Syndromeda/189901007722025?ref=hl -