Yahoo Groups archive
Messages
Page 37 of 564 · 28179 messages matched
2015-07-01 by Nicholas Keller
Ok, obviously the 185 also communicates with the bus, but you will have to patch the LFO output into the 107 CV input (CV1 for no attenuator, CV2 if attenuation is desired), not into the 185. On Wednesday, July 1, 2015, Nicholas Keller maq163x2@gmail.com > wrote: Neither of those
2015-07-01 by Nicholas Keller
Neither of those two modules send or receive CV via the bus. You must do those connections via front panel. Only MIDI/CV, VCOs, and some envelopes communicate via bus (unless modified). On Wednesday, July 1, 2015, acgenerator@att.net [Doepfer_a100] Doepfer_a100@yahoogroups.com >
2015-07-01 by acgenerator@att.net
I've recently expanded to a second frame but am having trouble getting my VC source from the LFO (A-146) on one frame to come across to the destination on the other frame ( in this case A-107). Both frames work correctly, as do both modules. These modules were always on separate
2015-06-25 by achtung_999
Yeah, for instance. On Thu, Jun 25, 2015 at 8:41 AM, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Absolutely, would there have been a reason it would be attached to another module? For its clock maybe? Sent from my iPhone On 25 Jun 2015,
2015-06-25 by Neil Kagan
Absolutely, would there have been a reason it would be attached to another module? For its clock maybe? Sent from my iPhone > On 25 Jun 2015, at 00:45, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] wrote: > > Like said earlier in the FB group, I am all for the random
2015-06-24 by achtung_999
Like said earlier in the FB group, I am all for the random fluctuating voltages module. But only if it is going to be a stand alone module, not dependent on being permanently attached to another module. Ernst On Wed, Jun 24, 2015 at 11:09 PM, christian ienni ienni23@yahoo.com [Do
2015-06-24 by christian ienni
ah yes, of course, i forgot. :-) From: "Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100]" To: "Doepfer_a100@yahoogroups.com" Sent: Wednesday, June 24, 2015 12:16 PM Subject: Re: [Doepfer_a100] Module suggestions I'm strictly doepfer only!! Sent from my iPhone On 24 Jun 2015, at 1
2015-06-24 by Neil Kagan
I'm strictly doepfer only!! Sent from my iPhone > On 24 Jun 2015, at 17:49, christian ienni ienni23@yahoo.com [Doepfer_a100] wrote: > > it's not quite the same thing, but the Koma Kommander is a cool infrared dual cv motion controller, kinda similar to roland's d-beam but for mod
2015-06-24 by christian ienni
it's not quite the same thing, but the Koma Kommander is a cool infrared dual cv motion controller, kinda similar to roland's d-beam but for modular. worth checking out. From: "Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100]" To: Doepfer_a100@yahoogroups.com Sent: Wednesday, Jun
2015-06-24 by Neil Kagan
Ah right - sort of a velocity sensor? I only just realised yesterday I’d love one of the VC light sources which are no longer available :( > On 24 Jun 2015, at 12:30, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] wrote: > > > Well one use - if you play ally of notes in
2015-06-24 by David Kellett
Well one use - if you play ally of notes in succession you could open the filter automatically rather than use a mod wheel. Or if using theremin or ribbon controllers you can use the rate of hand movement to control things - for instance use a quantizer so you get stable "steps"
2015-06-24 by François Gustin
Hello. I think these are excellent suggestions. Cheers. François VC LFO with PWM. Shame this wasn't added to the 147-2 : Oscilloscope. Well, I know this won't happen but I'd love to have the functionality of my O'tool but in the doepfer styling 118-2; with cv control over the noi
2015-06-24 by Neil Kagan
That sounds exciting.. what would i do with it? :) > On 24 Jun 2015, at 12:21, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] wrote: > > > I would add a module that measures the rate of change in a control signal and produces another CV proportional to the rate of chang
2015-06-24 by David Kellett
I would add a module that measures the rate of change in a control signal and produces another CV proportional to the rate of change. David www.movingisliving.co.uk Sent from my iPhone > On 24 Jun 2015, at 09:35, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] wrote: > > I'm hop
2015-06-24 by Neil Kagan
I'm hoping that the recent poll proved to people that if enough of us demonstrate interest then new modules can happen! There are a few things that since owning my system I know I would find useful. Often these are things where I find myself recreating the patch over again and wo
2015-06-23 by testingtesting1234123@yahoo.com
Thank you so much Dieter , such a needed little module just to keep a pure Doepfer rig ;-) Many thanks John Dale
2015-06-23 by marco.heimburger@yahoo.com
That's great!!! I suspect that you are not in the facebook-group, but there are some of us there that are very happy right now (and it is there the discussion about a buffered multiple cought on )
2015-06-23 by David Kellett
My MAQ 16/3 arrived today. It's great!! So far I've just tested it with midi to my Waldorf XT - I didn't want to get too distracted by the modular while I'm learning the controls on the sequencer. Anyone know where to get good long - say 4m - mini jack to mini jack leads in the U
2015-06-23 by yahoo@doepfer.de
I found a typing error in my former message. It should read "...As expected NO problems occured" Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] > Gesendet: Dienstag, 23. Juni 2015 12:51 > An: Doepfer a1
2015-06-23 by syndromeda@telenet.be
Wow, Great!!! ------------------------------------------------------ Danny Budts info@syndromeda.be www.syndromeda.be https://www.facebook.com/Syndromeda https://syndromeda.bandcamp.com/ https://www.facebook.com/pages/Syndromeda/189901007722025?ref=hl ----- Oorspronkelijk bericht
2015-06-23 by yahoo@doepfer.de
Update: the prototype pcb of the dual buffered multiple (A-180-3) arrived and has been tested. As expected to problems occured. The module will be released about September 2015. The price will be the same as the A-138u because it very similar (i.e. Euro 50). Best wishes Dieter Do
2015-06-20 by Loren Nerell
I've ALWAYS found this review in SOS to be rather helpful when it comes to understanding the MAQ16/3: http://www.soundonsound.com/sos/feb98/articles/doepfer.html -----Original Message----- From: "David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100]" Sent: Jun 19, 2015 10:47 A
2015-06-19 by David Kellett
I've ordered my MAQ 16/3 from EMIS is the UK. Rather excited now :-) Does it come with a Printed Manual or should I print one off from the website? David www.movingisliving.co.uk Sent from my iPhone > On 19 Jun 2015, at 17:33, christian ienni ienni23@yahoo.com [Doepfer_a100] wrot
2015-06-19 by Neil Kagan
All working fine! > On 19 Jun 2015, at 17:33, christian ienni ienni23@yahoo.com [Doepfer_a100] wrote: > > > hmmm... not that i NEED it of course :-) but maybe i'll have to grab one of those fancy black MAQs while analoguehaven still has them in stock! (i still have my silver MAQ
2015-06-19 by christian ienni
hmmm... not that i NEED it of course :-) but maybe i'll have to grab one of those fancy black MAQs while analoguehaven still has them in stock! (i still have my silver MAQ from 15 years ago - the first bit of Doepfer kit i ever got.) From: "yahoo@doepfer.de [Doepfer_a100]" To: Do
2015-06-19 by David Kellett
Thanks Dieter!! That's good to know..... David www.movingisliving.co.uk Sent from my iPhone > On 19 Jun 2015, at 11:16, yahoo@doepfer.de [Doepfer_a100] wrote: > > > Hi, > > > > I can't seem to see in the Maq manual if the CVs are quantized / can be quantized or not quantized. Can
2015-06-19 by yahoo@doepfer.de
> Hi, > > I can't seem to see in the Maq manual if the CVs are quantized / can be quantized or not quantized. Can someone help? I'm > thinking about buying one for my 50th Birthday but being able to not have quantization is very unadulterated for me. > Having it is also useful th
2015-06-19 by David Kellett
Hi, I can't seem to see in the Maq manual if the CVs are quantized / can be quantized or not quantized. Can someone help? I'm thinking about buying one for my 50th Birthday but being able to not have quantization is very unadulterated for me. Having it is also useful though!! Dav
2015-06-09 by christian ienni
that has been my experience. i always run my 154 from external clock, so have never encountered this particular "knob/timing" issue before. on those occasions when i'm running the 154 on its own clock i'm usually modulating the clock speed from an lfo or something else in some cr
2015-06-09 by yahoo@doepfer.de
> Alas, Christian says that it is currently an unsolved problem. Hmm… It’s early for me still, I haven’t had enough coffee > and I am not near the unit. So an external clock will solve the problem and a A-160-5 will want the external clock > anyway, correct? Do I run into any pro
2015-06-08 by Kazys Varnelis
Alas, Christian says that it is currently an unsolved problem. Hmm… It’s early for me still, I haven’t had enough coffee and I am not near the unit. So an external clock will solve the problem and a A-160-5 will want the external clock anyway, correct? Do I run into any problem i
2015-06-08 by yahoo@doepfer.de
> Same here, I’ve got used to it but is annoying!!! > > > Neil > > > On 7 Jun 2015, at 17:46, Kazys Varnelis kvarnelis@gmail.com [Doepfer_a100] wrote: > > > I have the A-154/A-155 sequencer and controller. It seems to me that something is off in the clock knob. Perhaps its just >
2015-06-08 by David Kellett
Thanks Dieter. I'll check the FAQs later, David www.movingisliving.co.uk Sent from my iPhone > On 8 Jun 2015, at 09:01, yahoo@doepfer.de [Doepfer_a100] wrote: > > > I'm having a bit of difficulty with a second hand A198. I have it set up with a very simple patch and can get the p
2015-06-08 by yahoo@doepfer.de
> I'm having a bit of difficulty with a second hand A198. I have it set up with a very simple patch and can get the pitch > to behave as I think it should however the pressure seems to need a lot of pressure to activate and also seems not to > work at the end furthest from the co
2015-06-07 by Neil Kagan
Hey people, I'm looking to buy some modules: A-176, A-151 (rev2), A-171-1, A-164, A-188-2. If anyone has these for sale, please email me. Regards, Neil
2015-06-07 by Neil Kagan
Same here, I’ve got used to it but is annoying!!! Neil > On 7 Jun 2015, at 17:46, Kazys Varnelis kvarnelis@gmail.com [Doepfer_a100] wrote: > > I have the A-154/A-155 sequencer and controller. It seems to me that something is off in the clock knob. Perhaps its just a logarithmic o
2015-06-07 by Kazys Varnelis
I have the A-154/A-155 sequencer and controller. It seems to me that something is off in the clock knob. Perhaps its just a logarithmic or exponential slope but until around 2pm on the knob, the increment to the clock proceeds very slowly. At that point, there is a huge jump and
2015-06-06 by achtung_999
...I see ;-) On Sat, Jun 6, 2015 at 11:19 PM, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Hi people, I’m struggling to get my head around this module. I thought I understood it until I used it as the slew part of the ‘Fluctuating Random
2015-06-06 by Neil Kagan
Hi people, I’m struggling to get my head around this module. I thought I understood it until I used it as the slew part of the ‘Fluctuating Random Voltages’ patch, instead of an A-171-1. The thing is I assumed that the CV attenuators would work in the following fashion: 0 to +5 =
2015-06-05 by Ian Campbell
my weekend is booked up now. :( -------------------------------------------- On Fri, 5/6/15, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] wrote: Subject: Re: [Doepfer_a100] Morton Subotnick live To: "Doepfer_a100@yahoogroups.com" Date: Friday, 5 June, 2015, 16:16 When
2015-06-05 by David Kellett
When my partner booked the ticket this week there were lots available. I found that strange as Cafe Otto is small and Morton Subotnick is big!! Might be worth checking to see if tickets are still available? David www.movingisliving.co.uk Sent from my iPhone > On 5 Jun 2015, at 16
2015-06-05 by Ian Campbell
wish i'd known about this. -------------------------------------------- On Fri, 5/6/15, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] wrote: Subject: Re: [Doepfer_a100] Morton Subotnick live To: "Doepfer_a100@yahoogroups.com" Date: Friday, 5 June, 2015, 14:00 Damn! www
2015-06-05 by David Kellett
Damn! www.movingisliving.co.uk Sent from my iPhone > On 5 Jun 2015, at 13:59, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] wrote: > > Tonight :) > > Sent from my iPhone > >> On 5 Jun 2015, at 13:32, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] wrote: >> >> >> Yes
2015-06-05 by Neil Kagan
Tonight :) Sent from my iPhone > On 5 Jun 2015, at 13:32, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] wrote: > > Yes on Saturday with my other half. Which day are you going on? > > David > > www.movingisliving.co.uk > > Sent from my iPhone > >> On 5 Jun 2015, at 12:3
2015-06-05 by David Kellett
Yes on Saturday with my other half. Which day are you going on? David www.movingisliving.co.uk Sent from my iPhone > On 5 Jun 2015, at 12:33, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] wrote: > > Anyone else going to this tonight? https://www.cafeoto.co.uk/events/morton-sub
2015-06-05 by Neil Kagan
Anyone else going to this tonight? https://www.cafeoto.co.uk/events/morton-subotnick-two-day-residency/ I’ll be there! Neil
2015-06-04 by Neil Kagan
Hey David, hope you're well! No, that doesn't sound right. I get a good vibrato / cv out of pressure. You do need to play with sensitivity a little, and the setup for pitch / position took a while too. Neil Sent from my iPhone > On 4 Jun 2015, at 16:57, David Kellett davidkellett
2015-06-04 by David Kellett
I'm having a bit of difficulty with a second hand A198. I have it set up with a very simple patch and can get the pitch to behave as I think it should however the pressure seems to need a lot of pressure to activate and also seems not to work at the end furthest from the connecto
2015-06-02 by yahoo@doepfer.de
> Dieter - > I would think about also make the opposite of a buffered multiple - a unity summer. Dual three inputs and one output > sections normalized to each other. It is often needed when transposing sequencers or other sources to destinations that > don’t have multiple 1V/oct
2015-06-01 by james.husted@mac.com
I guess I have to go to the Doepfer page more often! -J > On Jun 1, 2015, at 11:59 AM, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] wrote: > > > > --cough--- > > http://www.doepfer.de/a138u.htm > > On Mon, Jun 1, 2015 at 7:29 PM, james.husted@mac.com [Doepfer_a100]