Yahoo Groups archive
Messages
Page 64 of 564 · 28179 messages matched
2013-09-24 by Phil a
Well again, the gate output of the Minibrute alone does the job perfectly. I will try the DT with some eurorack envelopes later on and get back to you... Regards, Phil On Tue, Sep 24, 2013 at 12:59 PM, yahoo@doepfer.de > wrote: > I connected it to a ARP 2600 gate in. > > > Phil A
2013-09-24 by yahoo@doepfer.de
> I connected it to a ARP 2600 gate in. > > > Phil As far as I remember the ARP envelope generators require both gate and trigger. But I have heard that in most cases it's sufficient to connect the gate source to both ARP sockets (gate and trigger) via a multiple. Maybe someone i
2013-09-24 by Phil a
I connected it to a ARP 2600 gate in. Phil On Tue, Sep 24, 2013 at 12:38 PM, yahoo@doepfer.de > wrote: > I tried both positions and the result is the same and I doubt the > Minibrute's gate output delivers more than 5V.... > > Regards, > Phil The Dark Time gate output circuit is
2013-09-24 by yahoo@doepfer.de
> I tried both positions and the result is the same and I doubt the > Minibrute's gate output delivers more than 5V.... > > Regards, > Phil The Dark Time gate output circuit is a 10k pullup resistor (connected to +5V or +12V depending on the jumper position) and a transistor swit
2013-09-24 by Phil a
I tried both positions and the result is the same and I doubt the Minibrute's gate output delivers more than 5V.... Regards, Phil On Tue, Sep 24, 2013 at 12:11 PM, yahoo@doepfer.de > wrote: > Thanks for your reply. > Maybe my measuring method is not correct, I will try to find so
2013-09-24 by yahoo@doepfer.de
> Thanks for your reply. > Maybe my measuring method is not correct, I will try to find some > of these tools you recommend but what fact is I cannot get the > envelope of my synth triggered properly when feeding it with the > gate output of the DT, the envelope is lazy and weak,
2013-09-24 by Florian Anwander
Hello Danny On 24.09.13 10:42 , Danny Budts wrote: > /VC-126 of coarse means A-126 (did not had my coffe yet ;-)./ which leads to an even better explanation: A frequency shifter sounds like a pitch shifter, that had no coffe yet :-)) Florian
2013-09-24 by Danny Budts
VC-126 of coarse means A-126 (did not had my coffe yet ;-). ------------------------------------------------------ Danny Budts info@syndromeda.be www.syndromeda.be
2013-09-24 by Danny Budts
Thanks, well explained...so the VC-126 simply is more "mayem". Cheers, ------------------------------------------------------ Danny Budts info@syndromeda.be www.syndromeda.be
2013-09-24 by Phil a
Thanks for your reply. Maybe my measuring method is not correct, I will try to find some of these tools you recommend but what fact is I cannot get the envelope of my synth triggered properly when feeding it with the gate output of the DT, the envelope is lazy and weak, whereas w
2013-09-24 by yahoo@doepfer.de
> Hi group, > > > Dark TIme has this strange behaviour: the gate out signal seems > low, sending around only 2 to 3V (probably 2,5V but my measuring > tool is not accurate) when it should be sending 5V and around 5V > when it should be sending 12V (jumper in the 12V position). >
2013-09-23 by nuipb1@gmail.com
Hi group, Dark TIme has this strange behaviour: the gate out signal seems low, sending around only 2 to 3V (probably 2,5V but my measuring tool is not accurate) when it should be sending 5V and around 5V when it should be sending 12V (jumper in the 12V position). Would anyone hav
2013-09-23 by Zoë Blade
Ah, thank you, both of you!
2013-09-23 by Scott Rogers
I think it will be difficult to understand this module without actually hearing it. There are some basic examples (the MP3s) on the old 126 page that will help clear it up a bit! http://www.doepfer.de/a126.htm At 10:46 AM 9/23/2013, you wrote: So... one's linear, the other's expo
2013-09-23 by Peter Sedin
if it has cv-input for frequency i am. 2013/9/2 achtung_999 heinrich.himmelwasser@gmail.com > Hello list, I was just wondering if the updated version of the A126 (using the a143-9 as its oscillator) is still in the planning.. Any others here interested in this? grtz Ernst [Non-te
2013-09-23 by Florian Anwander
Hello Zoë, Am 23.09.2013 16:46, schrieb Zoë Blade: > So... one's linear, the other's exponential? No: simply addition vs multiplication. No highschool math included - its primary shool 3rd class mathematics. Florian
2013-09-23 by Zoë Blade
So... one's linear, the other's exponential?
2013-09-23 by Florian Anwander
Am 23.09.2013 15:47, schrieb syndromeda@telenet.be: > Can someone tell me if there is a difference between a frequency shifter > (A-126) and a pitch shifter as in the VCDSP A-187-1? The pitch shifter keeps the musical context. The frequency shofter doesn't. More technically spoke
2013-09-23 by syndromeda@telenet.be
Can someone tell me if there is a difference between a frequency shifter (A-126) and a pitch shifter as in the VCDSP A-187-1? Cheers, Danny --- In doepfer_a100@yahoogroups.com, wrote: Just to add my voice here, I was just yesterday wondering if Doepfer had a frequency shifter! I
2013-09-23 by Scott Rogers
Just to add my voice here, I was just yesterday wondering if Doepfer had a frequency shifter! I can't wait for this module! Scott www.scottfromcanada.com At 04:47 AM 9/23/2013, you wrote: > > I would love to get an updated Frequency Shifter. I still have my > > 1998 A-126, but fo
2013-09-23 by Nicholas Keller
Hey folks. Here is my archive of the Q-ONTROL v1 software. I thought I had posted this here before, but I may have posted it only in the MAQ16/3 yahoo group. https://www.dropbox.com/sh/ia3ccdrqxcs9ubi/vfCwcnoLXF Nick Sent from Drehbank
2013-09-23 by yahoo@doepfer.de
> Hi Phil! > > > I have read on the net that there was an ableton Live Pack > called q-control that will help me with getting my newly obtained > Maq 16/3 to communicate with Live ? > > Can anyone help me locate this ? > > A quick search reveals this article: > http://www.laptopr
2013-09-23 by Zoë Blade
Hi Phil! > I have read on the net that there was an ableton Live Pack called q-control that will help me with getting my newly obtained Maq 16/3 to communicate with Live ? > Can anyone help me locate this ? A quick search reveals this article: http://www.laptoprockers.eu/technolo
2013-09-23 by yahoo@doepfer.de
> I would love to get an updated Frequency Shifter. I still have my > 1998 A-126, but for one thing it won't fit in my new portable > case because it's a very deep module, so I can only use it in the > studio rather than live. > > > a different Ernst The planned new A-126-2 will
2013-09-23 by Phil White
Hi I have read on the net that there was an ableton Live Pack called q-control that will help me with getting my newly obtained Maq 16/3 to communicate with Live ? Can anyone help me locate this ? Regards and thanks Phil
2013-09-22 by Zoë Blade
Hi! In case this is any help to anyone, here's one way (probably not the best) to mount the A-199's spring reverb tank in a G6 case: http://www.youtube.com/watch?v=dwHUFzGZ03c It sounds free from mains hum to me. :) All the best, Zoë.
2013-09-21 by Florence Michel
Hi, one little composition with 2 A-126 http://soundcloud.com/synth4you/doepfer-song-white-a-126 For infos, all the elements of music exept the drums were made with Doepfer modules
2013-09-21 by Bakis Sirros
thanks for your excellent site Joffes ! Bakis ________________________________ From: "joffes@modular-planet.de" To: Doepfer_a100@yahoogroups.com Sent: Saturday, September 21, 2013 5:27 PM Subject: [Doepfer_a100] RE: A126 Frequency shifter updated version? BTW... ...new patch with
2013-09-21 by joffes@modular-planet.de
BTW... ...new patch with old Frequency Shifter ;-) http://www.modular-planet.de/fx/grandfather's_clock/grandfather's_clock.html Joffes --- In doepfer_a100@yahoogroups.com, wrote: I would love to get an updated Frequency Shifter. I still have my 1998 A-126, but for one thing it wo
2013-09-21 by lerake@yahoo.co.in
I would love to get an updated Frequency Shifter. I still have my 1998 A-126, but for one thing it won't fit in my new portable case because it's a very deep module, so I can only use it in the studio rather than live. a different Ernst --- In Doepfer_a100@yahoogroups.com, wrote:
2013-09-20 by mark@umcorps.com
Thanks Dieter. I'll replace the chip asap. Mark --- In doepfer_a100@yahoogroups.com, wrote: > Just picked up a used A-166 which is behaving in a way I didn't > expect. Not sure if it is faulty or if I haven't quite understood > how the module normalisations are supposed to work.
2013-09-20 by yahoo@doepfer.de
> Just picked up a used A-166 which is behaving in a way I didn't > expect. Not sure if it is faulty or if I haven't quite understood > how the module normalisations are supposed to work. > > Both sections work fine on their own - the logic operations are > as expected. > > But i
2013-09-20 by mark@umcorps.com
Just picked up a used A-166 which is behaving in a way I didn't expect. Not sure if it is faulty or if I haven't quite understood how the module normalisations are supposed to work. Both sections work fine on their own - the logic operations are as expected. But if I patch the up
2013-09-20 by yahoo@doepfer.de
> Hello all. I had a question which maybe some of you may answer. I > am using the a183-2 as a dc offset and feeding the output into cv > in #2 of the a143-9. With the cv2 control of the a143-9 at 0, The > offset from the a183 slows the LFO. Which is what I want,but when > I rais
2013-09-19 by raulpena1974@yahoo.com
Hello all. I had a question which maybe some of you may answer. I am using the a183-2 as a dc offset and feeding the output into cv in #2 of the a143-9. With the cv2 control of the a143-9 at 0, The offset from the a183 slows the LFO. Which is what I want,but when I raise the cv l
2013-09-18 by scistudio440
For auction: Doepfer A-197 Analog Meter in almost new condition : http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=321211088680 Item# 321211088680 Thanks, Phil
2013-09-18 by Bakis Sirros
hi all, :-) for all the new members, that never had the chance to listen to my (doepfer infested) music, here is my facebook page, including many tracks (with the A100, Serge and Buchla, plus others) and various photos of the doepfer A100: https://www.facebook.com/pages/Parallel-
2013-09-17 by yahoo@doepfer.de
> The signal-level of my A-118 is really low. About -1V -> +1V (in > contrast to the A-110s which have -5V -> +5V). I don't think > this has always been the case. > > > There is no trim-pot for output signal level (or anything) on the > A-118PCB. Is there a resistor that can be c
2013-09-17 by Bakis Sirros
normally, the noise output of A118 should be +/- 3 volts Peak to peak. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Worlds/192093934136476 www. myspace. com/ interc
2013-09-17 by pmclean_80207@yahoo.com
The signal-level of my A-118 is really low. About -1V -> +1V (in contrast to the A-110s which have -5V -> +5V). I don't think this has always been the case. There is no trim-pot for output signal level (or anything) on the A-118PCB. Is there a resistor that can be changed out to
2013-09-10 by Florian Anwander
Hello Mark If it is a standard BS2 then you may use: http://www.doepfer.de/A100_BS2_G6.jpg Am 10.09.2013 17:17, schrieb evileye0702@yahoo.com: > I do know that relying on patche sheets goes against the grain for many > of you. You are new to this list. How could you know? :-)) Fl
2013-09-10 by evileye0702@yahoo.com
Just got my A-100 Basic System 2 a couple of weeks ago and finally integrated it into my studio/workflow over the last weekend. The more I use it, the more I learn and the more I love it. I was hoping to jot down some favorite patches to use for future reference. Before I start c
2013-09-08 by Zoë Blade
Hmm, just to clarify, to make sure we're not talking at crossed purposes: DX-7 -> A-190-2 -> MC-4 should work. MC-4 -> A-192-2 -> DX-7 should work. But only in that order. I got a bit confused as you mentioned the MCV-4, which I believe is the same as the A-190-2, but different (
2013-09-08 by christian ienni
actually the first gen DX7 has a pretty crap midi implementation (yamaha engineers got "mono mode" completely wrong & velocity only goes up to 100 not 127). if it's a DX7II then no prob. ________________________________ From: Zoë Blade To: Doepfer_a100@yahoogroups.com Sent: Sunda
2013-09-08 by Florian Anwander
Hello > I'd guess the A-192-2 would work in this case, right? Yes. But why doing it the complicated (and expensive) way? If you want the advantages of entering note on an numeric base, then use a c64 with 24track or an atari ST with Creator, and you are already in the MIDI domain
2013-09-08 by willthomaslong@yahoo.com
Thanks for the reply! Yes, I'm trying to use the MC-4 to sequence notes on the DX7, and record them from the DX7 output (the same way you'd connect an analog monosynth with the MC-4, but without the converter in between). But the MCV-4 and the A-192-2 convert in different directi
2013-09-08 by Zoë Blade
Hi! > Has anyone tried a combination like this? I have a Roland MC-4 sequencer with only CV and Gate (No MIDI), and I'd like to use a DX7 (with MIDI, no CV) as the source/controller. > > Has anyone done something similar with the A-192-2, or the MCV4? What are you trying to do? I
2013-09-08 by willthomaslong@yahoo.com
Has anyone tried a combination like this? I have a Roland MC-4 sequencer with only CV and Gate (No MIDI), and I'd like to use a DX7 (with MIDI, no CV) as the source/controller. Has anyone done something similar with the A-192-2, or the MCV4?
2013-09-04 by achtung_999
For sale: Doepfer A-141 VC ADSR - €67 per piece (I am selling 2) Doepfer A-130 Linear VCA (version 2 from 2001) - €39 From a smoke free studio. Some rack rash on all, nothing too bad though. The A-130 is cheap because it's an old version only usable as a VCA to process audio. At
2013-09-04 by yahoo@doepfer.de
> Hi, > > I am an A-100 users group newbie, with a question that hopefully > has simple answer. I have Doepfer Dark Energy mk1 and mk2 > semi-modular synths, and a few other A-100 modules. > > When I play alternate notes quickly on the Dark energy synths, on > the mk1 the volume