Fairlight-CMI

Thanks so much Laurent!  That helps immensely!

I hate to ask another favor, but would it be possible for you to 
check and see what versions the EPROMS are on the Q777 and the 
Q133?  There should be a single EPROM on the Q777 (probably labeled 
SCSI) and 2 EPROMs on the Q133 - an FL8MRKx and a QF0MRKx, with 
the "x" denoting the revision.

Oh, and one more thing:  (as if I haven't bothered you enough) Is 
the data cable from the ACB4000A to the XT2190 (the wider of the 2 
cables) just straight through, or is there a section with a twist in 
it?

Thanks Laurent!  I owe you!


Tim


--- In Fairlight-CMI@yahoogroups.com, Laurent Lemaire 
<llemaire1@...> wrote:
>
> 
> 
> Hello Tim,
> 
> Here are the information you requested. I made two pictures of my
> Adaptec 4000A and of my XT-2190 hard-disk. You will find them on
> my web site there :
> 
> -> http://www.vectorsurfacingtools.com/fairlight/HD/
> 
> Please notice that my Adaptec board is setup with a SCSI ID = 2 
with
> the jumper C-D set on J5.
> 
> I've also included the Adaptec 4000A documentation I did found on 
the
> web. The quality is poor, but it's better that nothing.
> 
> Hope it helps.
> 
>        Laurent.
>