Yahoo Groups archive
Messages
Page 7 of 56 · 2770 messages matched
2009-01-30 by dkimcg
I made a ridiculous patch yesterday, and recorded it tonight using the Model 32 Vector Plotter. It's ridiculous how many modules and cables I used. Not a musical statement, more of an audio experiment in timing and pitch using the Model 32. Here's the track: http://joekickass.com
2009-01-30 by Don Kim
I see that building almost every day lately on the way to work lately. :D Lots of places to eat too, but I'm a little sick of La Dijonais. Last time I was in that complex I saw Elvin Jones, he even shook my hand and said hello after his set. On Thu, Jan 29, 2009 at 8:56 PM, (i th
2009-01-30 by Daniel Ornelas
Venice Blvd for the win! On Thu, Jan 29, 2009 at 8:56 PM, (i think you can figure that out) peter@buzzclick-music.com > wrote: Good news - I think we've found a new home - back to Culver City in the Helms Bakery Building where I kept my design studio for ten years: http://www.you
2009-01-30 by (i think you can figure that out)
Barring an earthquake, flood, snowstorm, etc..the Plan B Direct sales portal will be live tomorrow morning. We've set up the merchant account, just waiting for the confirmation. I'll post when it's up. - P
2009-01-30 by (i think you can figure that out)
Good news - I think we've found a new home - back to Culver City in the Helms Bakery Building where I kept my design studio for ten years: http://www.you-are-here.com/building/helms.jpg Looking at the photo you'll notice a pruned ficus tree on the right hand side. Two fights up t
2009-01-29 by Carlos
Any idea when this is actually happening Peter? my lust for modules that are not available on the other distributors continues to grow and the week is almost done now.
2009-01-29 by ghostdickenterprises
There are some interesting waveshapers going around in the sDIY crowd. Ian Fritz has a lot of inspirational waveshaper circuits. http://home.comcast.net/~ijfritz/sy_circ.htm Here is a VCO someone made with a pretty awesome feature set (includes Fritz's double pulse waveform). htt
2009-01-26 by dingfutzer
S l o w pot tweaks in both directions - Peter could you please verify this adjustment? Thanks Monroe - now, back for more mutilations ;-0 --- In PLAN_B_analog_blog@yahoogroups.com, Monroe Eskew wrote: > > Counterclockwise. Dare I ask, what kind of mutilations have you been > perf
2009-01-26 by DB
I can third this... I really didn't want to do the Doepfer DIY kits and now your ensuring I don't have to. Let us know when and how much? Dave Klavis_Verge wrote: > > Hi Peter, > > My friend and I have been wondering when the Plan B ringers will be > released and the > approximat
2009-01-26 by sascha victoria
Sweet! I can't wait to see you guys in LA. Pamona was always just far enough away that it was too annoying to drive out there. Any idea when we'll the Vector Plotter will be released? thanks Sascha On Sun, Jan 25, 2009 at 5:13 AM, (i think you can figure that out) peter@buzzclick
2009-01-25 by Monroe Eskew
Counterclockwise. Dare I ask, what kind of mutilations have you been performing? :-) On Jan 24, 2009, at 6:13 AM, dingfutzer wrote: Good Morning: Been using the 38's for awhile and have tried experiments with the trimpot. Just to be sure: the stage times are shortened by turning
2009-01-25 by Klavis_Verge
Hi Peter, My friend and I have been wondering when the Plan B ringers will be released and the approximate price of the ringer and psu. We already have money to buy 2 of them for sure and were just anxious to know when we can buy them! Thanks! -Cedric
2009-01-25 by (i think you can figure that out)
You're not being smart, you're being a complete gentleman and I appreciate that. Return them to me if you want a repair. We'll be there until the end of the Feb and you'll all know where we move to after that. One possibility in discussion: I've got a friend who's a clothing desi
2009-01-25 by amnesia
Peter Not being smart, but where will we send modules that need repair? If we bought them from Noisebug do we return to them? > >
2009-01-25 by Sean Williams
Congratulations on your thriving growth. What are the chances of seeing a UK dealer in the new list? Even using Thomann in Germany would be a huge leap forward. Dealing with the fluctuating exchange rates, shipping, duty, paying the Post Office fees for collecting the duty etc. e
2009-01-25 by (i think you can figure that out)
I originally intended to present this information in a clear, concise way which could not be cut, pasted or otherwise plopped onto blogs, mis interpreted or misconstrued. I was planning on a video in which to do this. But in that the information has already hit the blogs, I felt
2009-01-24 by brian
here here. this sounds excellent. b. --- On Sat, 1/24/09, Monroe Eskew wrote: From: Monroe Eskew Subject: [PLAN_B_analog_blog] ELF suggestion To: PLAN_B_analog_blog@yahoogroups.com Date: Saturday, January 24, 2009, 2:15 PM Hey Peter, I know you've already got your hands full, but
2009-01-24 by achtung_999
Great idea! On Sat, Jan 24, 2009 at 9:15 PM, Monroe Eskew monroe.eskew@gmail.com > wrote: Hey Peter, I know you've already got your hands full, but I wanted to throw this idea out there for the future. How about an ELF "clock multiplier?" Doepfer has an excellent 4HP divider, and
2009-01-24 by Christopher Jacob Recording Device
oh man that would rule. I know I'd buy one Chris On Sat, Jan 24, 2009 at 12:15 PM, Monroe Eskew monroe.eskew@gmail.com > wrote: Hey Peter, I know you've already got your hands full, but I wanted to throw this idea out there for the future. How about an ELF "clock multiplier?" Doe
2009-01-24 by kyle_easterly
I'd buy one or two if the price were reasonable! -Kyle --- In PLAN_B_analog_blog@yahoogroups.com, Monroe Eskew wrote: > > Hey Peter, > > I know you've already got your hands full, but I wanted to throw this > idea out there for the future. > > How about an ELF "clock multiplier?"
2009-01-24 by Monroe Eskew
Hey Peter, I know you've already got your hands full, but I wanted to throw this idea out there for the future. How about an ELF "clock multiplier?" Doepfer has an excellent 4HP divider, and a 4HP multiplier would be a great complement and a unique addition to any sequencing syst
2009-01-24 by achtung_999
Thanks Peter & Don! On Sat, Jan 24, 2009 at 9:39 AM, Don Kim dkimcg@gmail.com > wrote: yes it does. I was just tested it out to make sure with three M10s in LFO mode. the slowest one going into VC Splice. It acted like a crossfader between the two DC LFOs. I've used the Wavesplic
2009-01-24 by dingfutzer
Good Morning: Been using the 38's for awhile and have tried experiments with the trimpot. Just to be sure: the stage times are shortened by turning the pot in which direction? Thanks, Bill
2009-01-24 by (i think you can figure that out)
I'm very very flattered, but there's no comparison. Bob was an engineer of the ilk which no longer exists. When he had problems finding knobs for the Moogerfoogers, he started making his own. THAT my friends is an engineeers. He was bored to death looking at other equipment, didn
2009-01-24 by Sean Williams
I recommend "Analog Days" by Trevor Pinch and Frank Trocco for all sorts of insights gathered from extensive interviews with many of the people who designed, built, sold and used the big old modulars. Although you won't find info about Bob, Peter and Dieter and other "new wave" m
2009-01-24 by (i think you can figure that out)
The same ones on the M31 and M32 In fact, everything we release new now on will be using these guys. Much more reliable, and their vertical mounting affords flatter modules. As time goes on, I will continue to phase them into our sustaining product line. - P --- In PLAN_B_analog_
2009-01-24 by randaleem
Peter, Nice. Which jacks are you using to replace the cliff sockets? Kind regards, Randal --- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure that out)" wrote: > All, > Effective today we are beginning shipments of the newly re-designed > Model 15 Complex VCO whic
2009-01-24 by Don Kim
yes it does. I was just tested it out to make sure with three M10s in LFO mode. the slowest one going into VC Splice. It acted like a crossfader between the two DC LFOs. I've used the Wavesplicer like a "crude" VCA for signals as well. It's turned out more versitile than I though
2009-01-24 by (i think you can figure that out)
It'll work fine. --- In PLAN_B_analog_blog@yahoogroups.com, achtung_999 wrote: > > Hello, > I was trying to search older messages on the group page but was not able to > find anything. > My question: Is the model 39 also working for control voltages? > > Greetings, > > Ernst >
2009-01-24 by Christopher Jacob Recording Device
I've got an Analogue Solutions Midi-CV converter minus the faceplate and ribbon cable. I got it for my vostok but it turns out I didn't need to replace the module after all. I'm looking for something to fill 4 HP in a Doepfer mini case, any takers? I'll ship internationally. Chri
2009-01-24 by Monroe Eskew
Some questions for Peter-- I'm wondering what kind of backgrounds the proprietors of electronic musical instrument businesses have. I see that you got your education in music and worked for years in high-tech industries, right? How does this compare to other well-known wizards su
2009-01-23 by Don Kim
This explains why Billy Idol's White Wedding showed up in the audio in one of my videos. Not a huge deal for me since it was inaudible once the patch was started. On Fri, Jan 9, 2009 at 8:00 AM, (i think you can figure that out) wrote: > There's a lot of words on this problem on
2009-01-23 by achtung_999
Hello, I was trying to search older messages on the group page but was not able to find anything. My question: Is the model 39 also working for control voltages? Greetings, Ernst
2009-01-23 by evetsterueb
--- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure that out)" wrote: > > All, > > Effective today we are beginning shipments of the newly re-designed > Model 15 Complex VCO which incorporates two major changes: The > elimination of Cliff Jacks and 12 point to poi
2009-01-23 by astroschnautzer
this sounds great, also good very good move on changing jacks on model 15. --- In PLAN_B_analog_blog@yahoogroups.com, "Dan Levey" wrote: > > Holy cow! > > http://www.ear-group.net/sineFMwithsync.mp3 > > Sounds like the Buchla Sine with Timbre Shaping. > > You won't need a filter
2009-01-23 by Anthony Saunders
Also very interested in price / date for the psu and ringer... A On Fri, Jan 23, 2009 at 9:32 AM, Igor Medeiros wrote: > this explanation about the way PSU & modules interact in these systems is > very interesting, peter. > > can you tell us more about the external PSU you are re
2009-01-23 by John Chantler
looks great peter. do you have plans to abandon cliff jacks across the whole product line? Best, John. On 23 Jan 2009, at 16:15, (i think you can figure that out) wrote: All, Effective today we are beginning shipments of the newly re-designed Model 15 Complex VCO which incorporat
2009-01-23 by David Salter
Looks real nice Peter · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · David Salter Senior Consultant SSG UKI Thomson Reuters O +44 (0)20 7542 2402 X 52402 M 07990562402 david.salter@thomsonreuters.com thomsonreuters.com P Please consider the environm
2009-01-23 by Sean Hannan
Just out of curiosity, is there a philosophical reason why you're sticking to through-hole rather than robosuffing with SMT? -Sean --- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure that out)" wrote: > > All, > > Effective today we are beginning shipments of the
2009-01-23 by (i think you can figure that out)
All, Effective today we are beginning shipments of the newly re-designed Model 15 Complex VCO which incorporates two major changes: The elimination of Cliff Jacks and 12 point to point interconnect wires. A photo has been posted: http://groups.yahoo.com/group/PLAN_B_analog_blog/p
2009-01-23 by Igor Medeiros
this explanation about the way PSU & modules interact in these systems is very interesting, peter. can you tell us more about the external PSU you are releasing, and the price/dates we should expect for it & for the ringer? thx in advance igor On Fri, Jan 9, 2009 at 1:00 PM, (i t
2009-01-23 by chad_kettering
Selling the following modules. Prices include shipping within the USA. Shipping will be higher for locations outside the USA. Discounts on prices for multiple items purchased. Doepfer: A-127 Triple VC Resonsnce Filter $185 A-111 High End VCO (2) $235 ea. A-180 Multiple $40 Plan B
2009-01-22 by Monroe Eskew
sold. On Jan 21, 2009, at 3:02 PM, Monroe Eskew wrote: > Good working condition. Two years of use in non-smoking environment. > > Unit has been tuned up to 1 octave from the factory settings (now > default tone is about 128 Hz). I can reset before shipment if you > want. > > Pric
2009-01-22 by Christopher Jacob Recording Device
That frequency shift is deadly. Please sell them soon! Chris On Wed, Jan 21, 2009 at 11:16 PM, Dan Levey Leftbrain@sbcglobal.net > wrote: Holy cow! http://www.ear-group.net/sineFMwithsync.mp3 Sounds like the Buchla Sine with Timbre Shaping. You won't need a filter with this unit.
2009-01-22 by Don Kim
Me want! Hate to ask, but any idea around when? Before summer? :D BTW, the ringer's got me sold! Didn't plan on expanding my cases any more, but the ringer looks like it will make it easy as pie. -Don On Wed, Jan 21, 2009 at 9:31 PM, (i think you can figure that out) wrote: > The
2009-01-22 by Dan Levey
Holy cow! http://www.ear-group.net/sineFMwithsync.mp3 Sounds like the Buchla Sine with Timbre Shaping. You won't need a filter with this unit. Since it has level CV too it's practically an all in one synth module!
2009-01-22 by intellijel
Hi Guys, I am trying to get my first modular system going and I am looking for the following modules (used) if anyone has some at a good price. I am located in Vancouver, Canada if it makes a difference for shipping/exchange rate: Model 9 - Mixer/Atten. Model 12 - Vactrol Filter
2009-01-22 by (i think you can figure that out)
The following are quick sound samples of the Plan B Model 30 Triple Digital VCO Subsystem. There are no sound sources outside of a single Model 30 which is being either frequency, timbre or level controlled by external envelope generators, random voltages and LFOs. There were no
2009-01-22 by Carlos
Do you still have the vco? I am interested, how much is shipping to new york? and do you have the adaptor to use it on regular doepfer bus? thanks! Carlos -- In PLAN_B_analog_blog@yahoogroups.com, Monroe Eskew wrote: > > Good working condition. Two years of use in non-smoking env
2009-01-22 by (i think you can figure that out)
No, you're not imagining things. We are running behind. Any questions? ;-) --- In PLAN_B_analog_blog@yahoogroups.com, "Ivo Ivanov" wrote: > > Am I imagining things, or were the Vector Plotter and Mini Milton > supposed to be available by now? > > I seem to recall a post stating t