Yahoo Groups archive
Messages
Page 61 of 144 · 7194 messages matched
2007-01-14 by John Loffink
That is not a good idea since the signal will be unshielded for the length of the cable, for what is probably a long cable since it goes to other equipment. John Loffink The Microtonal Synthesis Web Site http://www.microtonal-synthesis.com The Wavemakers Synthesizer Web Site http
2007-01-13 by Ken Stone
For those in Australia, or how don't mind ordering from Australia: Plug Banana Stack Type Green http://www.altronics.com.au/index.asp?area=item&id=P9280 Plug Banana Stack Type Red http://www.altronics.com.au/index.asp?area=item&id=P9281 Plug Banana Stack Type Black http://www.alt
2007-01-13 by JB
Why don't you take a molded pomona, cut off one end and solder whatever you like to convert from there? johan
2007-01-13 by rdrake
I've used Johnson stackable plugs, Mouser part #s: 530-108-1082-1 (red) 530-108-1083-1 (black) 530-108-1084-1 (green) w/ good success... bbob Original Message----- >> From: SergeModular@yahoogroups.com >[mailto: SergeModular@yahoogroups.com ] >> On Behalf Of riluttante >> Sent: F
2007-01-13 by John Loffink
The cables from STS are made by Pomona as they are a single molded assembly. There are no part numbers for the Pomona stackable plugs. Outside of STS and Cyndustries, it is difficult to find the multi colored banana cables. Allied Electronics sometimes carry them. Red and black i
2007-01-12 by riluttante
Thanks, John! I'll start wading through that Mouser catalog...a "banana plug stacking" search returns a few hundred results, but I'm probably not filtering it right. Does anyone here happen to know the exact Pomona part number of the stackable plugs STS uses when they make their
2007-01-12 by John P
The Mouser or Digi-Key catalogs both have banana plugs, stackable and not, from Pomona and other makers. There are other online suppliers too - Allied, Newark, etc... Far as I know, banana plugs come non-stackable (just a banana tip coming out of the plastic case and the wire goi
2007-01-12 by riluttante
Hi everyone, I know the general opinion here is to use Pomona brand banana cables sold by STS amongst others (rather than soldering your own or using other brands), and I've ordered several sets of these from Rex for my new system. However, I'd also like to make a custom breakout
2007-01-04 by Steve Ridley
> Anybody knows if the 3080 is still being manufactured and/or sold in > US? A worrying number of ICs used in Serges have been discontinued recently or are now only available in surface mount versions. If you're thinking of getting any other spare ICs, do it soon. Steve
2007-01-02 by chad_kettering
Hello, I am selling many modules in frac rack and eurorack format on eBay. Look under my user name: soniclayers Thanks, Chad
2006-12-31 by John Loffink
The CA3080 is discontinued. You can still get them from a few sources for $2-3 each. http://safe.dhwd.com/cgi-bin/debco/index.html $3.00 http://www.futurlec.com/ $1.90 http://www.smallbearelec.com/StoreFront.bok $2.50 John Loffink The Microtonal Synthesis Web Site http://www.micr
2006-12-31 by John P
I spent some time looking thru the synth-diy list. There's some available at a place called 'debco' http://safe.dhwd.com/cgi-bin/debco/CA3080.html lars_arnwald wrote: > Hi, > Anybody knows if the 3080 is still being manufactured and/or sold in > US? If so, is there a link or an a
2006-12-30 by lars_arnwald
Hi, Anybody knows if the 3080 is still being manufactured and/or sold in US? If so, is there a link or an address to any vendor? Happy New 2007, Lars
2006-12-27 by JB
Where can i buy the Serge style knobs, the tall straight ones that bananalogue also uses? thanks johan
2006-12-26 by legion01x
anyone know of a source for rack ears for a serge pannel? I have a TKB in a deep boat with three holes on each side for ears. Are these a standard setting? anyone have either ears or a shallow boat for sale or trade? Thanks for any/all help! D_
2006-12-20 by simulacreant
Anyone looking to sell an Oakland or Hartland-era panel that happens to have a DCSM, VCF2, EQ, and ADSR in it? How about a PS4? Or would anyone like to trade a PS4 for a PS2 + cash? Thanks!
2006-12-19 by simulacreant
I've been using an Encore Expressionist with envelopes and other CV generated via Max/MSP, FL Studio, Nord G2... I've also used my two panels' DTGs as envelopes. But when it's time to synthesize a fast transient/sharp attack bass or a kick drum, my CV is not quite fast enough and
2006-12-17 by J J
oops that didn't need to go to the group (sorry)... Joe >From: "J J" seven7_7_7@... > >Reply-To: SergeModular@yahoogroups.com >To: SergeModular@yahoogroups.com >Subject: Re: [SergeModular] WANTED Sequencer panel >Date: Sun, 17 Dec 2006 18:30:00 +0000 > >Hi Joe here. Yeah I agree
2006-12-17 by J J
Hi Joe here. Yeah I agree the combo is very nice, but I don't need the touch side of the keyboard and I find the sequencer panel has more of what I look for in a patch...The studio looks great! I love the Modcan quite nice... Joe >From: Michael White mwsnd@... > >Reply-To: SergeM
2006-12-17 by Michael White
Hey Joe, The TKB and the animal are a very very cool combo/instrument. Are you sure you want to dump the TKB? I would give it another chance. my .02 MW here are some pics of my synths :-) On 17-Dec-06, at 12:37 AM, chorus72000 wrote: Hi Joe here. Just wanted to check and see if a
2006-12-17 by chorus72000
Hi Joe here. Just wanted to check and see if anyone is selling a Sequencer panel...or if anyone wants to trade their Sequencer panel for my TKB + cash...Please mail me back at jhevolve@... ... Thanks in advance... Joe
2006-12-12 by chorus72000
Hi Joe here. I just bought a system that came with a DIY panel, which I find I'm not using...I'd like to replace it with something else...So for sale...Its a well made DIY panel ( I have pic's ) which has a pulse divider, a boolean logic module, a audio/cv mixer ( with both banan
2006-12-11 by riluttante
Hi Steve, Michael, John, Thanks very much for the info! Yeah, I looked at those pictures on Ken Stone's webpage. Looks like a relatively modest design. I'll check with Rex if he can still make them once I'm ready to order a custom panel (still waiting for my first non-custom pane
2006-12-08 by Michael A. Firman
Blacet now makes a very similar module, check out his web page: http://www.blacet.com He has a bi-directional sequencial switch (the MD2650) --- In SergeModular@yahoogroups.com , "riluttante" wrote: > > I'd like to ask a few things about the Triple Bi-Directional Router (ROU). >
2006-12-08 by Steve Ridley
>> It's no longer listed in the catalog now, but it seems to have been manufactured until >> sometime in the early eighties. It's in my 1979 catalogue, but not in the 1982. > I believe the Triple Router was discontinued between 1979 and 1982. Serge dropped most of the early modul
2006-12-08 by John Loffink
I believe the Triple Router was discontinued between 1979 and 1982. It is always possible that Serge or Rex could build "special order" versions of it on request, after it was discontinued. I believe that has happened with other modules. FYI, I had dinner with composer Warren Bur
2006-12-07 by riluttante
I'd like to ask a few things about the Triple Bi-Directional Router (ROU). It's no longer listed in the catalog now, but it seems to have been manufactured until sometime in the early eighties. Darrel Johansen's 6-panel black Serge that is now at CalArts in Valencia has one, incl
2006-12-07 by Cynthia
No one expects the Cynthia Bug Off Contest! Fire-up your synthesizers and challenge yourself to record a wild and crazy piece of electronic musicand enter it in the Cyndustries surprise 2006 Aleatoric Music Competition which now begins! "WAR & PEACE" BUG OFF 2006 ELECTRONIC MUSIC
2006-12-05 by Ken Stone
--- In SergeModular@yahoogroups.com , Bakis Sirros wrote: > > hello Ken, > many thanks for the info! > btw, congrats on your great modules designs! > i have all the Bananalogue modules (that are partially > your designs, right?) and some Metalbox modules too. > best regards, > Ba
2006-12-03 by Bakis Sirros
hello Ken, many thanks for the info! btw, congrats on your great modules designs! i have all the Bananalogue modules (that are partially your designs, right?) and some Metalbox modules too. best regards, Bakis. --- Ken Stone sasami@... > wrote: > The Serge, according to its owner
2006-12-03 by Ken Stone
The Serge, according to its owners manual, can take inputs of up to 25 volts without problem, so 15 volts would not be an issue. I regularly cross-patch my assorted 15V systems, Roland 100M and Serge. Ken --- In SergeModular@yahoogroups.com , "Bakis Sirros" wrote: > > hello, > we
2006-12-03 by Bakis Sirros
hello, well? can i connect, without any problems, my serge panel with my roland system100m and blacet/fracrack modulars? the Serge is 12volts, the others are 15volts... in order to connect my doepfer a100 with the 15volts modulars, i have to watch not to connect 15volts signals t
2006-11-29 by John Loffink
This place sells 1 inch corner aluminum, .125 inch thick. They'll even cut it to the length you specify, so all you have to do is drill the holes. They are USA based, but do ship overseas. http://www.onlinemetals.com/merchant.cfm?pid=1016&step=4&showunits=inches John Loffink The
2006-11-29 by alt-mode
Rex sells Rack Ears but they are a bit pricey, something like $70 a set, when I bought some awhile back. They are nice extruded aluminum pieces though. The inexpensive solution is to get some 1", right angle aluminum or steel pieces and drill your own. Eric
2006-11-27 by buchla300
Hi all I have a 6 panel system (very old in a wooden suitcase) and would like to rack mount it. Are there any rack ears available for Serge panels or where can I find rack parts. PS: I am in Europe Thanks!
2006-11-19 by buchla300
--- In SergeModular@yahoogroups.com , "pow333us" wrote: > > Dang, > what a bring down. I wished for that panel. Sorry it's not working > out. I'm going to make one, with some cat girls to fill out the panel. > and a decent and long cable to connect up. > > My presto patch has 32
2006-11-19 by pow333us
Dang, what a bring down. I wished for that panel. Sorry it's not working out. I'm going to make one, with some cat girls to fill out the panel. and a decent and long cable to connect up. My presto patch has 32 pins. What do you serge and synthi owners think a good match between t
2006-11-18 by riluttante
--- In SergeModular@yahoogroups.com , "srroekel" wrote: > > --- In SergeModular@yahoogroups.com , "riluttante" wrote: > > > > Here's an unusual item: > > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120042577381 > > > > Just my kind of thing, a Serge with a "Prestopatch" co
2006-11-18 by JB
> I just tried to connect it to my Synthi Aks a few days ago, however > the Prestopatch connector on the panel is too wide! 2 pins too wide, > maybe it was meant for another type of EMS device. I really want it to > work with my Synthi Aks. > Maybe someone has a Prestopatch pin l
2006-11-18 by srroekel
--- In SergeModular@yahoogroups.com , "riluttante" wrote: > > Here's an unusual item: > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120042577381 > > Just my kind of thing, a Serge with a "Prestopatch" connector, like on the EMS Synthi A (no, > I'm not the seller) > > Not s
2006-11-13 by Chris Sawyer
Likewise, Ben was a pleasure to deal with and completely trustworthy.
2006-11-13 by Bakis Sirros
hello list, i am Bakis, a new member of this list and i have bought a second hand serge panel from ebay some days ago. this panel has 4 early 80's serge modules plus two custom modules. it does not has a PSU, so i have to wait for my tech to build one. so, i now want to expand th
2006-11-13 by benvehorn
I'm sure everyone knows he's a good trader already, but I just completed a nice smooth panel trade with Chris and wanted to let people know that he's top notch. Thanks Chris! ---Ben Vehorn
2006-11-13 by cuari7
Sorry, it's already been sold.
2006-11-11 by Fernando de Izuzquiza
Hi, I'm interested on the SKB. Please contact me privately, my e-mails are bouncing... Fernando --- In SergeModular@yahoogroups.com , "cuari7" wrote: > > Sorry for the spam. > SKB pop-up case, in very good-to-excellent condition. Used to keep my > Serge in it, but now I keep it t
2006-11-04 by cuari7
Sorry for the spam. SKB pop-up case, in very good-to-excellent condition. Used to keep my Serge in it, but now I keep it table-top. Also great for MOTM or DotCom. Want $80 plus s/h. Also for sale: Creamware Pro12 ASB. MINT. Less than 6 months old. $500 plus s/h. Yamaha FS1R, mint
2006-10-19 by Josue Arias
its easy, just need a connector that fits in the prestopatch in the EMS and run wires to jacks, banana or your choice. nothing special that can`t be done in a couple of hours, you have all ems in/outs in the prestopatch connector. best regards, josue arias. 2006/10/19, riluttante
2006-10-19 by riluttante
Here's an unusual item: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120042577381 Just my kind of thing, a Serge with a "Prestopatch" connector, like on the EMS Synthi A (no, I'm not the seller) Not sure how it works though... Thomas
2006-10-18 by benvehorn
Hi all, I have an Oakland-era STS Serge panel up for auction on ebay, item # 250038921455 . It's similar to the Red CV 1 shop panel with a few modules substituted. This is a perfect TKB companion and is in excellent condition. I have a buy-it-now price of $2099 and the current (2
2006-10-16 by riluttante
Does anyone perhaps have the current prices and dimensions for the available STS power supplies? Instead of deciding between a PS4 or a PS6 for my four-panel system, I'm considering ordering both a PS2 and a PS4, so that there's plenty of power in the studio when required, but ha