Disklavier

>
> 
> Can somebody give the procedure for doing this on a Mark III 
> (DC3A)?  Thank you.
>

>
> Yes, I would like to know this as well but I could not find it in search.  Thank you.
> 
> 
> --- In disklavier@yahoogroups.com, "sjhart110110" <sjhart110@> wrote:
> >
> > 
> > Can somebody give the procedure for doing this on a Mark III 
> > (DC3A)?  Thank you.
> >
>

On 18 Mar 2010, at 17:29, uhhmmmmmmmmmm wrote:

> I just found it:
> http://launch.groups.yahoo.com/group/disklavier/message/7259
>
> If the action is getting a bit worn or has had some work done to it,  
> you could try re-calibrating the piano.
>
> Hold down the Song Select buttons [<<] & [>>] while you power up.  
> This gets you into the maintenance mode. Press the [R] button until  
> the display comes up with "KEYBOARD MEASUREMENT". Press the Play  
> button. the piano will start playing notes repeatedly. While this is  
> going on, don't touch any buttons or keys! Eventually (hopefully) it  
> will come up with "OK! PRESS STOP". Press the Stop button, switch  
> off and the power up again normally. This should have re-written the  
> piano tables and compensated for any changes in the action.
>
> athomik
>
> --- In disklavier@yahoogroups.com, "uhhmmmmmmmmmm" <ronjong@...>  
> wrote:
> >
> > Yes, I would like to know this as well but I could not find it in  
> search. Thank you.
> >
> >
> > --- In disklavier@yahoogroups.com, "sjhart110110" <sjhart110@>  
> wrote:
> > >
> > >
> > > Can somebody give the procedure for doing this on a Mark III
> > > (DC3A)? Thank you.
> > >
> >
>
>
>

On Mar 18 2010, flowline wrote: 

>Can the Disklavier mk4 be controlled note by note with just the usb 
>interface to a computer and not the MIDI or both maybe?
>
>
>On 18 Mar 2010, at 17:29, uhhmmmmmmmmmm wrote:
>
>> I just found it:
>> http://launch. groups.yahoo. com/group/ disklavier/ message/7259
>>
>> If the action is getting a bit worn or has had some work done to it, 
>> you could try re-calibrating the piano.
>>
>> Hold down the Song Select buttons [<<] & [>>] while you power up. 
>> This gets you into the maintenance mode. Press the [R] button until 
>> the display comes up with "KEYBOARD MEASUREMENT". Press the Play 
>> button. the piano will start playing notes repeatedly. While this is 
>> going on, don't touch any buttons or keys! Eventually (hopefully) it 
>> will come up with "OK! PRESS STOP". Press the Stop button, switch 
>> off and the power up again normally. This should have re-written the 
>> piano tables and compensated for any changes in the action.
>>
>> athomik
>>
>> --- In disklavier@yahoogro ups.com, "uhhmmmmmmmmmm" 
>> wrote:
>> >
>> > Yes, I would like to know this as well but I could not find it in 
>> search. Thank you.
>> >
>> >
>> > --- In disklavier@yahoogro ups.com, "sjhart110110" 
>> wrote:
>> > >
>> > >
>> > > Can somebody give the procedure for doing this on a Mark III
>> > > (DC3A)? Thank you.
>> > >
>> >
>>
>>
>> 
>
>
>
>------------ --------- --------- ------
>
>To Post a message to the group, send it to: disklavier@YahooGro ups.com
>
>To Post a private message to Todd Muncy, the group's founder and moderator, send it to:
>disklavier-owner@ Yahoogroups. com
>
>To reach our group's web site go to:
>http://Yahoogroups. com/group/ disklavier
>
>THINKING OF LEAVING THE GROUP?
>If you are thinking of unsubcribing because you are getting too much mail, go the the web site and change your email delivery option instead. That will fix the problem, while maintaining your access to the group. If you insist on leaving us completely send a blank email to:
>disklavier-unsubscr ibe@yahooGroups. com 
>
>Know someone who wants to join? Have them send a blank email to:
>disklavier-subscrib e@eGroups. com or give them this link:
>http://Yahoogroups. com/group/ disklavier/ join 
>Yahoo! Groups Links
>
>
>
>

On Mar 19, 2010, at 7:14 AM, Kevin Goroway wrote:

> 
> There's more than one USB port on the Mark IV.  The main unit, under the piano, has a USB port that works perfectly with a simple USB cable to send/receive MIDI.  You'll need to download the drivers from Yamaha for your computer (there is a link in the manual, and it's been posted here before as well.)  I don't recall if you have to set something up via the PRC to tell it to use that port for MIDI or not.  Anyway, like I said earlier...I have a computer permanently attached to my MarkIV this way, and it happily sends and receives MIDI, so I know that it works. :-)
> 
> The usb interface on the front component (I can never get the names straight...the I/O controller?) can only be used for storage and backup as athomik says.
> 
> -Kevin
> 
> From: athomik <mangez@...>
> To: disklavier@yahoogroups.com
> Sent: Fri, March 19, 2010 6:52:37 AM
> Subject: Re: [disklavier] Disklavier mark 4 USB interface
> 
>  
> 
> The USB interface can only be used for storage devices (at the moment, at least). To control the keys, you have to use MIDI. For computers without MIDI, you can use a USB-MIDI interface, such as the Yamaha UX-16.
> athomik
> 
> On Mar 18 2010, flowline wrote: 
> 
> >Can the Disklavier mk4 be controlled note by note with just the usb 
> >interface to a computer and not the MIDI or both maybe?
> >