Emax II Rack My motherboard Does not work someone has a sale
2011-09-03 by Vavasseur Philippe
I need this motherboard Quickly I wait selling proposition
Thread
Emax II Rack My motherboard Does not work someone has a sale
Re: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-03 by Ted Summers
What is wrong with yours? did you contact Jammie and see if he can fix it/ what cost it would be? On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe <philippe.69@...>wrote: > ** > > > I need this motherboard Quickly I wait selling proposition > > > [Non-text portions of this message have been removed]
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-03 by philippe.69
the volume does not vary more maximum input sample does not work the gain levels and maximum if anyone has an idea that chip does not work IC5 ?? or IC ?? -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoyé : samedi 3 septembre 2011 23:11 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale What is wrong with yours? did you contact Jammie and see if he can fix it/ what cost it would be? On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe <philippe.69@...>wrote: > ** > > > I need this motherboard Quickly I wait selling proposition > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links
Re: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-03 by jammie.emma@...
it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect the cv dac send 0-5v control voltages to the 4051 multiplexer sample and holds theres 1 for volume 1 for filter cuttoff 1for resonanvce 1 for the panning 1 for vca if the cvdac goes then you wont get any voltage to these sample and holds so that when you apply the volume slider there wont be any voltage to the input so none will be applied to the outputs
Show quoted textHide quoted text
----- Original Message -----
From: philippe.69
To: emax@yahoogroups.com
Sent: Saturday, September 03, 2011 7:49 PM
Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
the volume does not vary more maximum input sample does not work the gain
levels and maximum
if anyone has an idea that chip does not work IC5 ?? or IC ??
-----Message d'origine-----
De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted
Summers
Envoyé : samedi 3 septembre 2011 23:11
À : emax@yahoogroups.com
Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a
sale
What is wrong with yours? did you contact Jammie and see if he can fix it/
what cost it would be?
On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe
<philippe.69@free.fr>wrote:
> **
>
>
> I need this motherboard Quickly I wait selling proposition
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups Links
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00
[Non-text portions of this message have been removed]RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-03 by philippe.69
hello jammie can you look on the pdf here to identify IC look at your mail boxjammie.emma@... I will attach the pdf of r.a.m.s@... my mail philippe.69@... or r.a.m.s@... thanks philippe -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoyé : samedi 3 septembre 2011 23:35 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect the cv dac send 0-5v control voltages to the 4051 multiplexer sample and holds theres 1 for volume 1 for filter cuttoff 1for resonanvce 1 for the panning 1 for vca if the cvdac goes then you wont get any voltage to these sample and holds so that when you apply the volume slider there wont be any voltage to the input so none will be applied to the outputs
Show quoted textHide quoted text
----- Original Message -----
From: philippe.69
To: emax@yahoogroups.com
Sent: Saturday, September 03, 2011 7:49 PM
Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has
a sale
the volume does not vary more maximum input sample does not work the gain
levels and maximum
if anyone has an idea that chip does not work IC5 ?? or IC ??
-----Message d'origine-----
De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted
Summers
Envoyé : samedi 3 septembre 2011 23:11
À : emax@yahoogroups.com
Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a
sale
What is wrong with yours? did you contact Jammie and see if he can fix it/
what cost it would be?
On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe
<philippe.69@...>wrote:
> **
>
>
> I need this motherboard Quickly I wait selling proposition
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups Links
----------------------------------------------------------------------------
--
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11
07:34:00
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups LinksRE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-03 by philippe.69
I think a IC5 --> HCF4051 -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@blueyonder.co.uk Envoyé : samedi 3 septembre 2011 23:35 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect the cv dac send 0-5v control voltages to the 4051 multiplexer sample and holds theres 1 for volume 1 for filter cuttoff 1for resonanvce 1 for the panning 1 for vca if the cvdac goes then you wont get any voltage to these sample and holds so that when you apply the volume slider there wont be any voltage to the input so none will be applied to the outputs
Show quoted textHide quoted text
----- Original Message -----
From: philippe.69
To: emax@yahoogroups.com
Sent: Saturday, September 03, 2011 7:49 PM
Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has
a sale
the volume does not vary more maximum input sample does not work the gain
levels and maximum
if anyone has an idea that chip does not work IC5 ?? or IC ??
-----Message d'origine-----
De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted
Summers
Envoyé : samedi 3 septembre 2011 23:11
À : emax@yahoogroups.com
Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a
sale
What is wrong with yours? did you contact Jammie and see if he can fix it/
what cost it would be?
On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe
<philippe.69@...>wrote:
> **
>
>
> I need this motherboard Quickly I wait selling proposition
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups Links
----------------------------------------------------------------------------
--
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11
07:34:00
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups LinksRe: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by jammie.emma@...
right the dac runs on its own power regulators check these 7805 and 7905 +5volts from the 7805 -5volts from the 7905 check you are getting the correct voltage if not the dac wont work check the bypass caps on these power regs
Show quoted textHide quoted text
----- Original Message -----
From: philippe.69
To: emax@yahoogroups.com
Sent: Saturday, September 03, 2011 11:21 PM
Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
I think a IC5 --> HCF4051
-----Message d'origine-----
De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de
jammie.emma@blueyonder.co.uk
Envoyé : samedi 3 septembre 2011 23:35
À : emax@yahoogroups.com
Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a
sale
it sound like the cvdac is at fualt its been a common fualt on the emax1
so that any control data being pan volume filter cutoff resonance dont have
any effect
the cv dac send 0-5v control voltages to the 4051 multiplexer sample and
holds
theres 1 for volume
1 for filter cuttoff
1for resonanvce
1 for the panning
1 for vca
if the cvdac goes then you wont get any voltage to these sample and holds so
that when you apply the volume slider there wont be any voltage to the input
so none will be applied to the outputs
----- Original Message -----
From: philippe.69
To: emax@yahoogroups.com
Sent: Saturday, September 03, 2011 7:49 PM
Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has
a sale
the volume does not vary more maximum input sample does not work the gain
levels and maximum
if anyone has an idea that chip does not work IC5 ?? or IC ??
-----Message d'origine-----
De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted
Summers
Envoyé : samedi 3 septembre 2011 23:11
À : emax@yahoogroups.com
Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a
sale
What is wrong with yours? did you contact Jammie and see if he can fix it/
what cost it would be?
On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe
<philippe.69@...>wrote:
> **
>
>
> I need this motherboard Quickly I wait selling proposition
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups Links
----------------------------------------------------------
--
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11
07:34:00
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups Links
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00
[Non-text portions of this message have been removed]RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by philippe.69
PSU 12v 5v FLOPPY DRIVE ok regulators 7805 ok 7905 +5V -5V OK -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoyé : dimanche 4 septembre 2011 12:23 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale right the dac runs on its own power regulators check these 7805 and 7905 +5volts from the 7805 -5volts from the 7905 check you are getting the correct voltage if not the dac wont work check the bypass caps on these power regs
Show quoted textHide quoted text
----- Original Message -----
From: philippe.69
To: emax@yahoogroups.com
Sent: Saturday, September 03, 2011 11:21 PM
Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has
a sale
I think a IC5 --> HCF4051
-----Message d'origine-----
De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de
jammie.emma@...
Envoyé : samedi 3 septembre 2011 23:35
À : emax@yahoogroups.com
Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a
sale
it sound like the cvdac is at fualt its been a common fualt on the emax1
so that any control data being pan volume filter cutoff resonance dont
have
any effect
the cv dac send 0-5v control voltages to the 4051 multiplexer sample and
holds
theres 1 for volume
1 for filter cuttoff
1for resonanvce
1 for the panning
1 for vca
if the cvdac goes then you wont get any voltage to these sample and holds
so
that when you apply the volume slider there wont be any voltage to the
input
so none will be applied to the outputs
----- Original Message -----
From: philippe.69
To: emax@yahoogroups.com
Sent: Saturday, September 03, 2011 7:49 PM
Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has
a sale
the volume does not vary more maximum input sample does not work the gain
levels and maximum
if anyone has an idea that chip does not work IC5 ?? or IC ??
-----Message d'origine-----
De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted
Summers
Envoyé : samedi 3 septembre 2011 23:11
À : emax@yahoogroups.com
Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a
sale
What is wrong with yours? did you contact Jammie and see if he can fix it/
what cost it would be?
On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe
<philippe.69@...>wrote:
> **
>
>
> I need this motherboard Quickly I wait selling proposition
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups Links
----------------------------------------------------------
--
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11
07:34:00
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups Links
----------------------------------------------------------------------------
--
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11
07:34:00
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups LinksRE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by Music Go Round Duluth, Minnesota
Hi, I don't quite know why this emaill was sent to us, but if there is anything that I can do to help, I will if you explain what you want us to do. Thanks! Music Go Round-Duluth 105 E. Central Entrance Duluth, MN 55811 T: 218.727.1420 TF: 877.MGR.DLTH F: 218.727.1402 mgrduluth@...m http://www.musicgoround.com Sign up for our Email Newsletter For Email Newsletters you can trust To: emax@yahoogroups.com
Show quoted textHide quoted text
From: jammie.emma@... Date: Sat, 3 Sep 2011 20:05:13 +0100 Subject: Re: [emax] Emax II Rack My motherboard Does not work someone has a sale it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect the cv dac send 0-5v control voltages to the 4051 multiplexer sample and holds theres 1 for volume 1 for filter cuttoff 1for resonanvce 1 for the panning 1 for vca if the cvdac goes then you wont get any voltage to these sample and holds so that when you apply the volume slider there wont be any voltage to the input so none will be applied to the outputs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 7:49 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale the volume does not vary more maximum input sample does not work the gain levels and maximum if anyone has an idea that chip does not work IC5 ?? or IC ?? -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoy� : samedi 3 septembre 2011 23:11 � : emax@...m Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale What is wrong with yours? did you contact Jammie and see if he can fix it/ what cost it would be? On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe <philippe.69@...>wrote: > ** > > > I need this motherboard Quickly I wait selling proposition > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by Music Go Round Duluth, Minnesota
Hi, I don't quite know why this emaill was sent to us, but if there is anything that I can do to help, I will if you explain what you want us to do. Thanks! (PS-I anwsered another email like this too) Music Go Round-Duluth 105 E. Central Entrance Duluth, MN 55811 T: 218.727.1420 TF: 877.MGR.DLTH F: 218.727.1402 mgrduluth@... http://www.musicgoround.com Sign up for our Email Newsletter For Email Newsletters you can trust To: emax@yahoogroups.com
Show quoted textHide quoted text
From: jammie.emma@... Date: Sun, 4 Sep 2011 08:52:38 +0100 Subject: Re: [emax] Emax II Rack My motherboard Does not work someone has a sale right the dac runs on its own power regulators check these 7805 and 7905 +5volts from the 7805 -5volts from the 7905 check you are getting the correct voltage if not the dac wont work check the bypass caps on these power regs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 11:21 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale I think a IC5 --> HCF4051 -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoy� : samedi 3 septembre 2011 23:35 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect the cv dac send 0-5v control voltages to the 4051 multiplexer sample and holds theres 1 for volume 1 for filter cuttoff 1for resonanvce 1 for the panning 1 for vca if the cvdac goes then you wont get any voltage to these sample and holds so that when you apply the volume slider there wont be any voltage to the input so none will be applied to the outputs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 7:49 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale the volume does not vary more maximum input sample does not work the gain levels and maximum if anyone has an idea that chip does not work IC5 ?? or IC ?? -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoy� : samedi 3 septembre 2011 23:11 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale What is wrong with yours? did you contact Jammie and see if he can fix it/ what cost it would be? On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe <philippe.69@...>wrote: > ** > > > I need this motherboard Quickly I wait selling proposition > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by Music Go Round Duluth, Minnesota
Again...... Hi, I don't quite know why this emaill was sent to us, but if there is anything that I can do to help, I will if you explain what you want us to do. Thanks! Music Go Round-Duluth 105 E. Central Entrance Duluth, MN 55811 T: 218.727.1420 TF: 877.MGR.DLTH F: 218.727.1402 mgrduluth@... http://www.musicgoround.com Sign up for our Email Newsletter For Email Newsletters you can trust To: emax@...m
Show quoted textHide quoted text
From: philippe.69@... Date: Sun, 4 Sep 2011 17:51:44 +0430 Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale PSU 12v 5v FLOPPY DRIVE ok regulators 7805 ok 7905 +5V -5V OK -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoy� : dimanche 4 septembre 2011 12:23 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale right the dac runs on its own power regulators check these 7805 and 7905 +5volts from the 7805 -5volts from the 7905 check you are getting the correct voltage if not the dac wont work check the bypass caps on these power regs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 11:21 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale I think a IC5 --> HCF4051 -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoy� : samedi 3 septembre 2011 23:35 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect the cv dac send 0-5v control voltages to the 4051 multiplexer sample and holds theres 1 for volume 1 for filter cuttoff 1for resonanvce 1 for the panning 1 for vca if the cvdac goes then you wont get any voltage to these sample and holds so that when you apply the volume slider there wont be any voltage to the input so none will be applied to the outputs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 7:49 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale the volume does not vary more maximum input sample does not work the gain levels and maximum if anyone has an idea that chip does not work IC5 ?? or IC ?? -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoy� : samedi 3 septembre 2011 23:11 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale What is wrong with yours? did you contact Jammie and see if he can fix it/ what cost it would be? On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe <philippe.69@...>wrote: > ** > > > I need this motherboard Quickly I wait selling proposition > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed]
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by philippe.69
I want a motherboard just to rack emax II if anyone has one for sale -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Music Go Round Duluth, Minnesota Envoyé : dimanche 4 septembre 2011 23:42 À : emax@yahoogroups.com Objet : RE: [emax] Emax II Rack My motherboard Does not work someone has a sale Again...... Hi, I don't quite know why this emaill was sent to us, but if there is anything that I can do to help, I will if you explain what you want us to do. Thanks! Music Go Round-Duluth 105 E. Central Entrance Duluth, MN 55811 T: 218.727.1420 TF: 877.MGR.DLTH F: 218.727.1402 mgrduluth@hotmail.com http://www.musicgoround.com Sign up for our Email Newsletter For Email Newsletters you can trust To: emax@yahoogroups.com
Show quoted textHide quoted text
From: philippe.69@... Date: Sun, 4 Sep 2011 17:51:44 +0430 Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale PSU 12v 5v FLOPPY DRIVE ok regulators 7805 ok 7905 +5V -5V OK -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoyé : dimanche 4 septembre 2011 12:23 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale right the dac runs on its own power regulators check these 7805 and 7905 +5volts from the 7805 -5volts from the 7905 check you are getting the correct voltage if not the dac wont work check the bypass caps on these power regs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 11:21 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale I think a IC5 --> HCF4051 -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@blueyonder.co.uk Envoyé : samedi 3 septembre 2011 23:35 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect the cv dac send 0-5v control voltages to the 4051 multiplexer sample and holds theres 1 for volume 1 for filter cuttoff 1for resonanvce 1 for the panning 1 for vca if the cvdac goes then you wont get any voltage to these sample and holds so that when you apply the volume slider there wont be any voltage to the input so none will be applied to the outputs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 7:49 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale the volume does not vary more maximum input sample does not work the gain levels and maximum if anyone has an idea that chip does not work IC5 ?? or IC ?? -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoyé : samedi 3 septembre 2011 23:11 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale What is wrong with yours? did you contact Jammie and see if he can fix it/ what cost it would be? On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe <philippe.69@...>wrote: > ** > > > I need this motherboard Quickly I wait selling proposition > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links
Re: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by Ted Summers
No one on the group appears to be selling a board at this time. your options are simple: 1) Repair your Emax board -either repair yourself or -help from Jammie. perhaps change 4051 ICs as he suggested.... 2) Buy another unit from off Ebay and use the board from that or take its parts. On Sep 4, 2011, at 1:02 PM, philippe.69 wrote: I want a motherboard just to rack emax II if anyone has one for sale -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Music Go Round Duluth, Minnesota Envoy� : dimanche 4 septembre 2011 23:42 � : emax@yahoogroups.com Objet : RE: [emax] Emax II Rack My motherboard Does not work someone has a sale Again...... Hi, I don't quite know why this emaill was sent to us, but if there is anything that I can do to help, I will if you explain what you want us to do. Thanks! Music Go Round-Duluth 105 E. Central Entrance Duluth, MN 55811 T: 218.727.1420 TF: 877.MGR.DLTH F: 218.727.1402 mgrduluth@... http://www.musicgoround.com Sign up for our Email Newsletter For Email Newsletters you can trust To: emax@yahoogroups.com
Show quoted textHide quoted text
From: philippe.69@... Date: Sun, 4 Sep 2011 17:51:44 +0430 Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale PSU 12v 5v FLOPPY DRIVE ok regulators 7805 ok 7905 +5V -5V OK -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoy� : dimanche 4 septembre 2011 12:23 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale right the dac runs on its own power regulators check these 7805 and 7905 +5volts from the 7805 -5volts from the 7905 check you are getting the correct voltage if not the dac wont work check the bypass caps on these power regs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 11:21 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale I think a IC5 --> HCF4051 -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoy� : samedi 3 septembre 2011 23:35 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect the cv dac send 0-5v control voltages to the 4051 multiplexer sample and holds theres 1 for volume 1 for filter cuttoff 1for resonanvce 1 for the panning 1 for vca if the cvdac goes then you wont get any voltage to these sample and holds so that when you apply the volume slider there wont be any voltage to the input so none will be applied to the outputs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 7:49 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale the volume does not vary more maximum input sample does not work the gain levels and maximum if anyone has an idea that chip does not work IC5 ?? or IC ?? -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoy� : samedi 3 septembre 2011 23:11 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale What is wrong with yours? did you contact Jammie and see if he can fix it/ what cost it would be? On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe <philippe.69@...>wrote: > ** > > > I need this motherboard Quickly I wait selling proposition > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed]
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by philippe.69
4051 IC 5 I install a new the problem does not change with Jammie the conclusion of ic 13 tomorrow I will change if the one at the store if it still does not work mask rom is the e endomager So I'll have another motherboard -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoyé : lundi 5 septembre 2011 01:00 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale No one on the group appears to be selling a board at this time. your options are simple: 1) Repair your Emax board -either repair yourself or -help from Jammie. perhaps change 4051 ICs as he suggested.... 2) Buy another unit from off Ebay and use the board from that or take its parts. On Sep 4, 2011, at 1:02 PM, philippe.69 wrote: I want a motherboard just to rack emax II if anyone has one for sale -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Music Go Round Duluth, Minnesota Envoyé : dimanche 4 septembre 2011 23:42 À : emax@yahoogroups.com Objet : RE: [emax] Emax II Rack My motherboard Does not work someone has a sale Again...... Hi, I don't quite know why this emaill was sent to us, but if there is anything that I can do to help, I will if you explain what you want us to do. Thanks! Music Go Round-Duluth 105 E. Central Entrance Duluth, MN 55811 T: 218.727.1420 TF: 877.MGR.DLTH F: 218.727.1402 mgrduluth@... http://www.musicgoround.com Sign up for our Email Newsletter For Email Newsletters you can trust To: emax@yahoogroups.com
Show quoted textHide quoted text
From: philippe.69@... Date: Sun, 4 Sep 2011 17:51:44 +0430 Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale PSU 12v 5v FLOPPY DRIVE ok regulators 7805 ok 7905 +5V -5V OK -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@blueyonder.co.uk Envoyé : dimanche 4 septembre 2011 12:23 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale right the dac runs on its own power regulators check these 7805 and 7905 +5volts from the 7805 -5volts from the 7905 check you are getting the correct voltage if not the dac wont work check the bypass caps on these power regs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 11:21 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale I think a IC5 --> HCF4051 -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoyé : samedi 3 septembre 2011 23:35 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect the cv dac send 0-5v control voltages to the 4051 multiplexer sample and holds theres 1 for volume 1 for filter cuttoff 1for resonanvce 1 for the panning 1 for vca if the cvdac goes then you wont get any voltage to these sample and holds so that when you apply the volume slider there wont be any voltage to the input so none will be applied to the outputs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 7:49 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale the volume does not vary more maximum input sample does not work the gain levels and maximum if anyone has an idea that chip does not work IC5 ?? or IC ?? -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoyé : samedi 3 septembre 2011 23:11 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale What is wrong with yours? did you contact Jammie and see if he can fix it/ what cost it would be? On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe <philippe.69@...>wrote: > ** > > > I need this motherboard Quickly I wait selling proposition > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-04 by philippe.69
ted there is nothing on ebay if you ever see something a email thank you thanks, philippe -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoyé : lundi 5 septembre 2011 01:00 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale No one on the group appears to be selling a board at this time. your options are simple: 1) Repair your Emax board -either repair yourself or -help from Jammie. perhaps change 4051 ICs as he suggested.... 2) Buy another unit from off Ebay and use the board from that or take its parts. On Sep 4, 2011, at 1:02 PM, philippe.69 wrote: I want a motherboard just to rack emax II if anyone has one for sale -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Music Go Round Duluth, Minnesota Envoyé : dimanche 4 septembre 2011 23:42 À : emax@yahoogroups.com Objet : RE: [emax] Emax II Rack My motherboard Does not work someone has a sale Again...... Hi, I don't quite know why this emaill was sent to us, but if there is anything that I can do to help, I will if you explain what you want us to do. Thanks! Music Go Round-Duluth 105 E. Central Entrance Duluth, MN 55811 T: 218.727.1420 TF: 877.MGR.DLTH F: 218.727.1402 mgrduluth@hotmail.com http://www.musicgoround.com Sign up for our Email Newsletter For Email Newsletters you can trust To: emax@yahoogroups.com
Show quoted textHide quoted text
From: philippe.69@... Date: Sun, 4 Sep 2011 17:51:44 +0430 Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale PSU 12v 5v FLOPPY DRIVE ok regulators 7805 ok 7905 +5V -5V OK -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoyé : dimanche 4 septembre 2011 12:23 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale right the dac runs on its own power regulators check these 7805 and 7905 +5volts from the 7805 -5volts from the 7905 check you are getting the correct voltage if not the dac wont work check the bypass caps on these power regs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 11:21 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale I think a IC5 --> HCF4051 -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@blueyonder.co.uk Envoyé : samedi 3 septembre 2011 23:35 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect the cv dac send 0-5v control voltages to the 4051 multiplexer sample and holds theres 1 for volume 1 for filter cuttoff 1for resonanvce 1 for the panning 1 for vca if the cvdac goes then you wont get any voltage to these sample and holds so that when you apply the volume slider there wont be any voltage to the input so none will be applied to the outputs ----- Original Message ----- From: philippe.69 To: emax@...m Sent: Saturday, September 03, 2011 7:49 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale the volume does not vary more maximum input sample does not work the gain levels and maximum if anyone has an idea that chip does not work IC5 ?? or IC ?? -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoyé : samedi 3 septembre 2011 23:11 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale What is wrong with yours? did you contact Jammie and see if he can fix it/ what cost it would be? On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe <philippe.69@...>wrote: > ** > > > I need this motherboard Quickly I wait selling proposition > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links
Re: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-05 by Ted Summers
Emax 2 Rack http://www.ebay.com/itm/E-mu-EMAX-2-/320754022685?pt=LH_DefaultDomain_0&hash=item4aae6df91d Emax 2 Keyboard http://www.ebay.com/itm/E-mu-Emax-11-16-bit-Sampler-Workstation-NICE-/270809626423?pt=Keyboards_MIDI&hash=item3f0d82f737 It may not be amount you want to pay. but saying they are not on ebay is not correct. Now if you are looking for only parts emax 2, that is more rare. I still think your best bet is to send it to Jammie and have him fix it. On Sep 4, 2011, at 2:38 PM, philippe.69 wrote: ted there is nothing on ebay if you ever see something a email thank you thanks, philippe -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoy� : lundi 5 septembre 2011 01:00 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale No one on the group appears to be selling a board at this time. your options are simple: 1) Repair your Emax board -either repair yourself or -help from Jammie. perhaps change 4051 ICs as he suggested.... 2) Buy another unit from off Ebay and use the board from that or take its parts. On Sep 4, 2011, at 1:02 PM, philippe.69 wrote: I want a motherboard just to rack emax II if anyone has one for sale -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Music Go Round Duluth, Minnesota Envoy� : dimanche 4 septembre 2011 23:42 � : emax@yahoogroups.com Objet : RE: [emax] Emax II Rack My motherboard Does not work someone has a sale Again...... Hi, I don't quite know why this emaill was sent to us, but if there is anything that I can do to help, I will if you explain what you want us to do. Thanks! Music Go Round-Duluth 105 E. Central Entrance Duluth, MN 55811 T: 218.727.1420 TF: 877.MGR.DLTH F: 218.727.1402 mgrduluth@... http://www.musicgoround.com Sign up for our Email Newsletter For Email Newsletters you can trust To: emax@yahoogroups.com
Show quoted textHide quoted text
From: philippe.69@... Date: Sun, 4 Sep 2011 17:51:44 +0430 Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale PSU 12v 5v FLOPPY DRIVE ok regulators 7805 ok 7905 +5V -5V OK -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@blueyonder.co.uk Envoy� : dimanche 4 septembre 2011 12:23 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale right the dac runs on its own power regulators check these 7805 and 7905 +5volts from the 7805 -5volts from the 7905 check you are getting the correct voltage if not the dac wont work check the bypass caps on these power regs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 11:21 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale I think a IC5 --> HCF4051 -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoy� : samedi 3 septembre 2011 23:35 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect the cv dac send 0-5v control voltages to the 4051 multiplexer sample and holds theres 1 for volume 1 for filter cuttoff 1for resonanvce 1 for the panning 1 for vca if the cvdac goes then you wont get any voltage to these sample and holds so that when you apply the volume slider there wont be any voltage to the input so none will be applied to the outputs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 7:49 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale the volume does not vary more maximum input sample does not work the gain levels and maximum if anyone has an idea that chip does not work IC5 ?? or IC ?? -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoy� : samedi 3 septembre 2011 23:11 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale What is wrong with yours? did you contact Jammie and see if he can fix it/ what cost it would be? On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe <philippe.69@...>wrote: > ** > > > I need this motherboard Quickly I wait selling proposition > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed]
RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-05 by philippe.69
the rack not been displayed in My eBay version of the keyboard can not be installed in a rack the control panel are not the same -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoyé : lundi 5 septembre 2011 06:03 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale Emax 2 Rack http://www.ebay.com/itm/E-mu-EMAX-2-/320754022685?pt=LH_DefaultDomain_0&hash =item4aae6df91d Emax 2 Keyboard http://www.ebay.com/itm/E-mu-Emax-11-16-bit-Sampler-Workstation-NICE-/270809 626423?pt=Keyboards_MIDI&hash=item3f0d82f737 It may not be amount you want to pay. but saying they are not on ebay is not correct. Now if you are looking for only parts emax 2, that is more rare. I still think your best bet is to send it to Jammie and have him fix it. On Sep 4, 2011, at 2:38 PM, philippe.69 wrote: ted there is nothing on ebay if you ever see something a email thank you thanks, philippe -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoyé : lundi 5 septembre 2011 01:00 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale No one on the group appears to be selling a board at this time. your options are simple: 1) Repair your Emax board -either repair yourself or -help from Jammie. perhaps change 4051 ICs as he suggested.... 2) Buy another unit from off Ebay and use the board from that or take its parts. On Sep 4, 2011, at 1:02 PM, philippe.69 wrote: I want a motherboard just to rack emax II if anyone has one for sale -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Music Go Round Duluth, Minnesota Envoyé : dimanche 4 septembre 2011 23:42 À : emax@yahoogroups.com Objet : RE: [emax] Emax II Rack My motherboard Does not work someone has a sale Again...... Hi, I don't quite know why this emaill was sent to us, but if there is anything that I can do to help, I will if you explain what you want us to do. Thanks! Music Go Round-Duluth 105 E. Central Entrance Duluth, MN 55811 T: 218.727.1420 TF: 877.MGR.DLTH F: 218.727.1402 mgrduluth@... http://www.musicgoround.com Sign up for our Email Newsletter For Email Newsletters you can trust To: emax@yahoogroups.com
Show quoted textHide quoted text
From: philippe.69@... Date: Sun, 4 Sep 2011 17:51:44 +0430 Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale PSU 12v 5v FLOPPY DRIVE ok regulators 7805 ok 7905 +5V -5V OK -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoyé : dimanche 4 septembre 2011 12:23 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale right the dac runs on its own power regulators check these 7805 and 7905 +5volts from the 7805 -5volts from the 7905 check you are getting the correct voltage if not the dac wont work check the bypass caps on these power regs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 11:21 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale I think a IC5 --> HCF4051 -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@blueyonder.co.uk Envoyé : samedi 3 septembre 2011 23:35 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect the cv dac send 0-5v control voltages to the 4051 multiplexer sample and holds theres 1 for volume 1 for filter cuttoff 1for resonanvce 1 for the panning 1 for vca if the cvdac goes then you wont get any voltage to these sample and holds so that when you apply the volume slider there wont be any voltage to the input so none will be applied to the outputs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 7:49 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale the volume does not vary more maximum input sample does not work the gain levels and maximum if anyone has an idea that chip does not work IC5 ?? or IC ?? -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoyé : samedi 3 septembre 2011 23:11 À : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale What is wrong with yours? did you contact Jammie and see if he can fix it/ what cost it would be? On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe <philippe.69@...>wrote: > ** > > > I need this motherboard Quickly I wait selling proposition > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links
Re: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-05 by Ted Summers
if the issue is mainboard or audio board you can move just that board. On Sep 4, 2011, at 11:39 PM, philippe.69 wrote: the rack not been displayed in My eBay version of the keyboard can not be installed in a rack the control panel are not the same -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoy� : lundi 5 septembre 2011 06:03 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale Emax 2 Rack http://www.ebay.com/itm/E-mu-EMAX-2-/320754022685?pt=LH_DefaultDomain_0&hash =item4aae6df91d Emax 2 Keyboard http://www.ebay.com/itm/E-mu-Emax-11-16-bit-Sampler-Workstation-NICE-/270809 626423?pt=Keyboards_MIDI&hash=item3f0d82f737 It may not be amount you want to pay. but saying they are not on ebay is not correct. Now if you are looking for only parts emax 2, that is more rare. I still think your best bet is to send it to Jammie and have him fix it. On Sep 4, 2011, at 2:38 PM, philippe.69 wrote: ted there is nothing on ebay if you ever see something a email thank you thanks, philippe -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoy� : lundi 5 septembre 2011 01:00 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale No one on the group appears to be selling a board at this time. your options are simple: 1) Repair your Emax board -either repair yourself or -help from Jammie. perhaps change 4051 ICs as he suggested.... 2) Buy another unit from off Ebay and use the board from that or take its parts. On Sep 4, 2011, at 1:02 PM, philippe.69 wrote: I want a motherboard just to rack emax II if anyone has one for sale -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@...m] De la part de Music Go Round Duluth, Minnesota Envoy� : dimanche 4 septembre 2011 23:42 � : emax@yahoogroups.com Objet : RE: [emax] Emax II Rack My motherboard Does not work someone has a sale Again...... Hi, I don't quite know why this emaill was sent to us, but if there is anything that I can do to help, I will if you explain what you want us to do. Thanks! Music Go Round-Duluth 105 E. Central Entrance Duluth, MN 55811 T: 218.727.1420 TF: 877.MGR.DLTH F: 218.727.1402 mgrduluth@... http://www.musicgoround.com Sign up for our Email Newsletter For Email Newsletters you can trust To: emax@yahoogroups.com
Show quoted textHide quoted text
From: philippe.69@... Date: Sun, 4 Sep 2011 17:51:44 +0430 Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale PSU 12v 5v FLOPPY DRIVE ok regulators 7805 ok 7905 +5V -5V OK -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoy� : dimanche 4 septembre 2011 12:23 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale right the dac runs on its own power regulators check these 7805 and 7905 +5volts from the 7805 -5volts from the 7905 check you are getting the correct voltage if not the dac wont work check the bypass caps on these power regs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 11:21 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale I think a IC5 --> HCF4051 -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de jammie.emma@... Envoy� : samedi 3 septembre 2011 23:35 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale it sound like the cvdac is at fualt its been a common fualt on the emax1 so that any control data being pan volume filter cutoff resonance dont have any effect the cv dac send 0-5v control voltages to the 4051 multiplexer sample and holds theres 1 for volume 1 for filter cuttoff 1for resonanvce 1 for the panning 1 for vca if the cvdac goes then you wont get any voltage to these sample and holds so that when you apply the volume slider there wont be any voltage to the input so none will be applied to the outputs ----- Original Message ----- From: philippe.69 To: emax@yahoogroups.com Sent: Saturday, September 03, 2011 7:49 PM Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale the volume does not vary more maximum input sample does not work the gain levels and maximum if anyone has an idea that chip does not work IC5 ?? or IC ?? -----Message d'origine----- De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted Summers Envoy� : samedi 3 septembre 2011 23:11 � : emax@yahoogroups.com Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a sale What is wrong with yours? did you contact Jammie and see if he can fix it/ what cost it would be? On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe <philippe.69@...>wrote: > ** > > > I need this motherboard Quickly I wait selling proposition > > > [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links ---------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11 07:34:00 [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed] ------------------------------------ Emax and Emax II User's Group Website http://www.silveriafamily.comYahoo! Groups Links [Non-text portions of this message have been removed]
Re: [emax] Emax II Rack My motherboard Does not work someone has a sale
2011-09-05 by jammie.emma@...
but the mother board is the same and i would say its the mother board not display did you test the voltages like i said on the volume pot and the value pot as they both go to the 4051 the 4051 samples the voltage from these sliders and that voltage gets sent as logic to the cpu and lsi 2 ic the cpu interprets the logic and is sent to the lsi 2 cv control ic this then sends the control signals to the dacs now if the front panel is at fualt then its just a cold solder joint as there are no control ic or components on the front panel apart from the inverter for the lcd which is a 5v dc to dc convertor it changes the voltage to -5v for the lcd contrast which goes to a pot that limits this voltage to -0.3 volts lower than vcc you need a logic anyliser to see what the 4051 is recording and if the coprrect logic is being recorded its alright changing components if you have narrowed it down to that ic being the problem it could be as simple as a burnt out resistor a cap or a cold solder joint which is most likely
Show quoted textHide quoted text
----- Original Message -----
From: philippe.69
To: emax@yahoogroups.com
Sent: Monday, September 05, 2011 7:39 AM
Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a sale
the rack not been displayed in My eBay version of the keyboard can not be
installed in a rack the control panel are not the same
-----Message d'origine-----
De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted
Summers
Envoyé : lundi 5 septembre 2011 06:03
À : emax@yahoogroups.com
Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a
sale
Emax 2 Rack
http://www.ebay.com/itm/E-mu-EMAX-2-/320754022685?pt=LH_DefaultDomain_0&hash
=item4aae6df91d
Emax 2 Keyboard
http://www.ebay.com/itm/E-mu-Emax-11-16-bit-Sampler-Workstation-NICE-/270809
626423?pt=Keyboards_MIDI&hash=item3f0d82f737
It may not be amount you want to pay. but saying they are not on ebay is not
correct.
Now if you are looking for only parts emax 2, that is more rare.
I still think your best bet is to send it to Jammie and have him fix it.
On Sep 4, 2011, at 2:38 PM, philippe.69 wrote:
ted there is nothing on ebay if you ever see something a email thank you
thanks,
philippe
-----Message d'origine-----
De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted
Summers
Envoyé : lundi 5 septembre 2011 01:00
À : emax@yahoogroups.com
Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a
sale
No one on the group appears to be selling a board at this time.
your options are simple:
1) Repair your Emax board
-either repair yourself
or
-help from Jammie.
perhaps change 4051 ICs as he suggested....
2) Buy another unit from off Ebay and use the board from that or take its
parts.
On Sep 4, 2011, at 1:02 PM, philippe.69 wrote:
I want a motherboard just to rack emax II if anyone has one for sale
-----Message d'origine-----
De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Music
Go Round Duluth, Minnesota
Envoyé : dimanche 4 septembre 2011 23:42
À : emax@yahoogroups.com
Objet : RE: [emax] Emax II Rack My motherboard Does not work someone has a
sale
Again......
Hi,
I don't quite know why this emaill was sent to us, but if there is anything
that I can do to help, I will if you explain what you want us to do.
Thanks!
Music Go Round-Duluth
105 E. Central Entrance
Duluth, MN 55811
T: 218.727.1420
TF: 877.MGR.DLTH
F: 218.727.1402
mgrduluth@...
http://www.musicgoround.com
Sign up for our Email Newsletter
For Email Newsletters you can trust
To: emax@yahoogroups.com
From: philippe.69@...
Date: Sun, 4 Sep 2011 17:51:44 +0430
Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has a
sale
PSU 12v 5v FLOPPY DRIVE ok regulators 7805 ok 7905 +5V -5V OK
-----Message d'origine-----
De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de
jammie.emma@...
Envoyé : dimanche 4 septembre 2011 12:23
À : emax@yahoogroups.com
Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a
sale
right the dac runs on its own power regulators check these 7805 and 7905
+5volts from the 7805
-5volts from the 7905 check you are getting the correct voltage if not the
dac wont work check the bypass caps on these power regs
----- Original Message -----
From: philippe.69
To: emax@yahoogroups.com
Sent: Saturday, September 03, 2011 11:21 PM
Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has
a sale
I think a IC5 --> HCF4051
-----Message d'origine-----
De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de
jammie.emma@blueyonder.co.uk
Envoyé : samedi 3 septembre 2011 23:35
À : emax@yahoogroups.com
Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a
sale
it sound like the cvdac is at fualt its been a common fualt on the emax1
so that any control data being pan volume filter cutoff resonance dont
have
any effect
the cv dac send 0-5v control voltages to the 4051 multiplexer sample and
holds
theres 1 for volume
1 for filter cuttoff
1for resonanvce
1 for the panning
1 for vca
if the cvdac goes then you wont get any voltage to these sample and holds
so
that when you apply the volume slider there wont be any voltage to the
input
so none will be applied to the outputs
----- Original Message -----
From: philippe.69
To: emax@yahoogroups.com
Sent: Saturday, September 03, 2011 7:49 PM
Subject: RE: [emax] Emax II Rack My motherboard Does not work someone has
a sale
the volume does not vary more maximum input sample does not work the gain
levels and maximum
if anyone has an idea that chip does not work IC5 ?? or IC ??
-----Message d'origine-----
De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de Ted
Summers
Envoyé : samedi 3 septembre 2011 23:11
À : emax@yahoogroups.com
Objet : Re: [emax] Emax II Rack My motherboard Does not work someone has a
sale
What is wrong with yours? did you contact Jammie and see if he can fix it/
what cost it would be?
On Sat, Sep 3, 2011 at 11:22 AM, Vavasseur Philippe
<philippe.69@...>wrote:
> **
>
>
> I need this motherboard Quickly I wait selling proposition
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups Links
----------------------------------------------------------
--
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11
07:34:00
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups Links
----------------------------------------------------------
--
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.901 / Virus Database: 271.1.1/3874 - Release Date: 09/03/11
07:34:00
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups Links
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups Links
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups Links
[Non-text portions of this message have been removed]
------------------------------------
Emax and Emax II User's Group Website
http://www.silveriafamily.comYahoo! Groups Links
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.901 / Virus Database: 271.1.1/3876 - Release Date: 09/04/11 07:34:00
[Non-text portions of this message have been removed]