wanted to buy - matrix 6R
2009-04-07 by eightiescrisis
san francisco, usa
Messages
Browse messages
Page 38 of 51 · 2518 messages matched
FA: OBERHEIM OB-8 and related stuff
2009-04-01 by chthonic
hi, i thought people on this group might want to know about the oberheim and other synth stuff i m selling. it kills me to let go of this OB-8 but at the
anyone want to trade an 8v OBX for a nice 12bit JUPITER 8
2009-03-31 by lobit12
email me we can discuss it.
Re:Help on Matrix 1000 fault
2009-03-30 by travelling_without_movin
thanks for the suggestion johan i try to find one to hear it.. by the way just for some other eventual help to anyone having the same problem: i have fixed the
Marion MSR-2 Operating System Revisions
2009-03-28 by glinskym@sbcglobal.net
Anyone know what the last OS revisions for the Marion MSR-2 are? And if they are available anywhere? Thanks.
Re: [oberheim] Re:Help on Matrix 1000 fault
2009-03-12 by Johan Wallgren
Roland MKS-70 is comparable and fantastic. Johan ... From: travelling_without_movin To: oberheim@yahoogroups.com Sent: Thursday, March 12, 2009 1:39 AM
Re:Help on Matrix 1000 fault
2009-03-12 by travelling_without_movin
Hello fabrizio, thank you for the hint but i have already checked the thing.. i am thinking that can be the usual fault on these machine that seem to be
Re:Help on Matrix 1000 fault
2009-03-11 by Fabrizio
Hi Paolo, I would check for the units settings in faulty presets: if it s set to 2 or more, you ve just found the problem! Just switch off the Unit
Help on Matrix 1000 fault
2009-03-11 by travelling_without_movin
Hello all on the list, Just purchased this great sinth .. i just been impressed on the fatness of the sound and the telluric dynamics and low ends... is a real
Re: [oberheim] Re: OB-x Troubleshooting
2009-02-25 by Paul J. White
... A higher clock speed Z80-CPU should be fine. I don t think NMOS vs. CMOS matters in this case either. ... Probably OK, but it may depend on what part of
Re: [oberheim] Re: OB-x Troubleshooting
2009-02-25 by Paul J. White
... A higher clock speed Z80-CPU should be fine. I don t think NMOS vs. CMOS matters in this case either. ... Probably OK, but it may depend on what part of
Re: OB-x Troubleshooting
2009-02-25 by jim finch
Another question.What are the 4 switches on the panel board for?
Re: OB-x Troubleshooting
2009-02-25 by jim finch
Another question.What are the 4 switches on the panel board for?
Re: OB-x Troubleshooting
2009-02-25 by jim finch
Well,It appears to be the Z-80 CPU.With all the chips associated with the D3 line are pulled,D3 still swings between 0-2V.No shorts to ground,or other
Re: Oberheim OB-XA repair
2009-02-22 by nate.sharp1
Great, thanks for the info I ll give him a call this week and I will drop your name. Unfortunately, I do not have the tape with the factory patches on them.
Re: [oberheim] Oberheim OB-XA repair
2009-02-22 by JC
call Peter Miller at CAE sounds in San Mateo. 650.348.2737. Tell him I referred you. I bought one on ebay last year in bad shape and he got it up and
Oberheim OB-XA repair
2009-02-21 by nate.sharp1
Hi, I live in the Bay Area, Northern CA do any of you guys know of a good repair tech for an Oberheim OB-Xa that is in that area? thanks
RE: [oberheim] Re: OB8 Problems.
2009-02-21 by Nicole Massey
It s called a Roadie s Screwdriver, and the application of kinetic force to an object s housing (including people, sometimes) does miracles for fixing problems
Re: OB8 Problems.
2009-02-21 by Dorus Manassis
I believe you might find this funny.... my friend decided finally to take this beauty (OB8) to the synth technician. So he tries to load it to his car. On the
Xpander power supply problems
2009-02-20 by kovalmoog67
First at all, Hello to the members of this list. My name is Sergio, from Spain. A friend of mine gaves me his Xpander for repairing, and now I am in a very big
Re: OB-x Troubleshooting
2009-02-19 by jim finch
Won t be selling it for parts-I will fix-what, no faith in my abilities?
Re: [oberheim] Re: OB-x Troubleshooting
2009-02-18 by JC
wives never understand this obsession of some of us with old synths. I tell mine, think of it as the equivelent of your desire to have lots of shoes. Of
Re: OB-x Troubleshooting
2009-02-18 by jim finch
I know that it s not power supply related.I have replaced some of the tantalum caps that fried on one of the voice cards.Yes, I know what the voice cards are
Re: OB-x Troubleshooting
2009-02-18 by nelsonj_sce
I wish you both the best of luck. Let me know when you decide to sell it as parts. ... is ... many, ... tried ... directly
Re: [oberheim] Re: OB-x Troubleshooting
2009-02-18 by Paul J. White
... Remove any and all ICs that have a connection to D3 one at a time until the loading goes away. You shouldn t damage anything if you turn off the power
Re: OB-x Troubleshooting
2009-02-18 by nelsonj_sce
Don t pull out ICs - pull out the voice cards. If you have an 8 voice machine, on the right half of the keyboard (high notes) there will be a hinged shelve
Re: OB-x Troubleshooting
2009-02-17 by jim finch
Did some work over the weekend.Here s what I found.The D3 line is loaded down to about 2 volts.All the other Data lines are reading 4.8- 5 volts.Pulled the
Re: OB-x Troubleshooting
2009-02-16 by nelsonj_sce
I have an OB-X and have gotten it back to life many times. First, your memory battery likely went dead. If the board still works (you can program it by turning
Re: OB-x Troubleshooting
2009-02-11 by jim finch
Don t need stories about other peoples unrelated products please,just some useful tips on servicing this beast of a OB-X.I don t want to come off as being
Re: R: [oberheim] Re: Matrix1000: fault voice?
2009-02-10 by Mr Ralf Schildan
Ah, and I forgot, sometimes it´s enough just to take a chip out, clean the contacts and put it in again, firmly ;)
Re: R: [oberheim] Re: Matrix1000: fault voice?
2009-02-10 by Mr Ralf Schildan
Hi everybody, i think I haven´t read this before here, if I missed it, sorry for the unnecessary information. The thing to check after selfcalibration is the
re: OB-x Troubleshooting
2009-02-10 by Trey Petty
I ve had a Matrix-6R sitting in its box for the past 8years (can t bear to part with it, and have BIG PLANS to haul it out and fire it up again). Are you guys
Re: R: [oberheim] Re: Matrix1000: fault voice?
2009-02-10 by F.Manduca
Ha, ha 8-), yes, indeed! Well, I was lucky to notice as, after following wise suggestions from other members to run the calibration test as shown in the
Re: R: [oberheim] Re: Matrix1000: fault voice?
2009-02-10 by ron zakrin
Hey, it s me again. Like I said, some of my patches are messed up... some are missing one note out of six, some have other issues. I have learned to aaccept
R: [oberheim] Re: Matrix1000: fault voice?
2009-02-09 by F.Manduca
Thanks a lot, maybe Oberheim programmers made the presets in a hurry and nothing more. I only wish I could store some of my future patches so to find them
OB-x Troubleshooting
2009-02-09 by jahg88
Hi All.Have a OB-x that worked great the last time I used it two yrs. ago.Now when turned on,random lights come up.I have the service manual.Power supply
OB-x Troubleshooting
2009-02-09 by jahg88
Hi All.Have a OB-x that worked great the last time I used it two yrs. ago.Now when turned on,random lights come up.I have the service manual.Power supply
Re: Matrix1000: fault voice?
2009-02-09 by rzakrin
... zero. ... I have the same problem, I would say about 2/3 of the patches work fine, the other third are unusable. I learned to live with it. Regarding
Matrix1000: fault voice?
2009-02-08 by resistenzaaoltranza
Again, here am I. Good new and bad new: thanks to the self-calibration routine, You wisely suggested me, I finally noticed that the six voices sounds
Matrix1000: fault voice?
2009-02-07 by resistenzaaoltranza
Many thanks for Your kindness.... I am going to try and then I will tell You. I forgot to write I have the 1.1 OS version, while the chip on the right side has
Re: [oberheim] Matrix1000: fault voice?
2009-02-06 by David Kyle
sounds like one osc needs replacement ? d On Fri, Feb 6, 2009 at 9:53 AM, resistenzaaoltranza
Re: [oberheim] Re: Matrix1000: fault voice?
2009-02-06 by Margus Kliimask
And if the calibration does not do the trick, find out which voice is the bad one (in Display Active Voice mode described below), then swap the CEM chips
Re: Matrix1000: fault voice?
2009-02-06 by narfman96
Congratulations on your new purchase! There is a self calibration and voice test mode in the Matrix1000. This is explained on page 39 in the manual. Select
Re: [oberheim] Matrix1000: fault voice?
2009-02-06 by Frank de Ruiter
Put the Matrix in test mode and calibrate the unit. Page 39 in the owners manual www.flitemedia.com/downloads/matrix1000/OberheimMatrix1000.pdf ... From:
Matrix1000: fault voice?
2009-02-06 by resistenzaaoltranza
Hello, there! I am a new proud Matrix1000 owner. Testing all the voices I felt something was wrong: pressing the same note six times, I hear the last behaving
Re: [oberheim] OB8 Problems.
2009-01-26 by Paul J. White
... It could be a lot of things, but the fact that it s a group of four voices indicates something common to that voice board. It could be a bad connector, a
OB8 Problems.
2009-01-26 by Dorus Manassis
Ok i visited a friend yesterday and he has received an OB8 that is in bad shape. When you turn it on it plays ok for some seconds and then it starts sounding
Re: [oberheim] Matrix 6 broken keys
2009-01-13 by David Kyle
hey -i found the link- http://sounddoctorin.com/synthtec/parts/key.htm Oberheim Matrix 6 As you can see,
Re: [oberheim] Matrix 6 broken keys
2009-01-13 by David Kyle
I also have this problem- 1 broken C key- 3 yrs ago i found a guy selling them on ebay-bought 1 and never received it-managed to get my paypal back, tho. I
Matrix 6 broken keys
2009-01-12 by Rei
Hi, a friend of mine gave me his Matrix 6 with two broken keys. Does anybody know where can I find spare keys? Thanx