Yahoo Groups archive
Messages
Page 148 of 564 · 28179 messages matched
2010-04-02 by zaum
Doepfer A-145 LFO $65 shipped to the U.S. I accept paypal. Local NYC pickup OK. Will ship via Priority Insured in the U.S. Will only ship outside the US via Express Mail which isn't that cheap. Please consult http://usps.gov to see if international shipping is within your budget.
2010-03-31 by Phil
For sale in perfect condition with screws and ribbon (descriptions taken from the manufacturers' sites): - Analogue Solutions SY02 : Multimode filter & VCA based on KORG MS20 filter section 90 euros - Doepfer A-103 18dB Low Pass 1 (VCF6) : reproduction of the legendary TB303 filt
2010-03-31 by Bakis Sirros
adding Doepfer A145 LFO, price 65% of new, 58.5 USD Bakis --- On Tue, 3/30/10, Bakis Sirros wrote: > A140 sold. > > some info on the A185-1 Bus Access module to see how useful > it is (i already have two more, in constant use, in my euro > system): > > active bus access module to
2010-03-30 by Shrewsbury Marie
ok, i understand now. thanks for that :D --- On Tue, 3/30/10, achtung_999 wrote: > From: achtung_999 > Subject: Re: [Doepfer_a100] A112 Sampler Osc questions > To: Doepfer_a100@yahoogroups.com > Date: Tuesday, March 30, 2010, 8:42 PM > hello. > > What I am suggesting is for tweak
2010-03-30 by Bakis Sirros
A140 sold. some info on the A185-1 Bus Access module to see how useful it is (i already have two more, in constant use, in my euro system): active bus access module to feed cv and gate into the a-100 bus (e.g. when using more than one frame or with external cv/gate interfaces). m
2010-03-30 by achtung_999
hello. What I am suggesting is for tweaking after you have recorded the wavetable. It's a means to 'edit', Since you are never able to get it 100% recorded like you want.. at least I mostly have some pop after the loop etc.. On Tue, Mar 30, 2010 at 8:55 PM, Shrewsbury Marie wrote
2010-03-30 by Shrewsbury Marie
I'm not sure i understand what you mean. I need to be able to sweep the wavetable consistently to record into it or playback something like what was recorded in? You're suggesting using a constant voltage attenuated to mod the wavetable position manually? --- On Sun, 3/28/10, ach
2010-03-30 by Bakis Sirros
hello, for sale in fine condition (with screws and ribbon): Doepfer A140 ADSR, price 65% of new, 61.75 USD Doepfer A185-1 Bus Access, price 65% of new, 42.25 USD plus 10 US shipping and 3% paypal fees. if you buy both modules, shipping is still only 10 usd for both! paypal paymen
2010-03-30 by zaum
I've definitely heard retold stories of Arp Odyssey's being returned as broken because the VCA slider was raised. It ranks alongside stories of monosynths being sent back because they only played one note at a time when you tried to play a chord. Rick Wakeman still tells that sto
2010-03-30 by York Luethje
Well, I like the A 110's, a lot of bang for the buck. But there are plenty of nice oscillators out there you might want to check out http://mega.modularplanner.co.uk/ which has all the Eurorack manufacturers listed. What kind of music are you interested in making? Techno? Exper
2010-03-30 by York Luethje
No, at least not all of them together. The A 112 for example would be too deep for the Beauty case. That's why I suggested the Low cost case much more space you won't run out of pretty soon. Head over to the Doepfer site, there you'll find a list of all the modules, their power
2010-03-29 by Sheever Apogonys
Thanks for your help York Which VCO would you suggest for main osc? [Non-text portions of this message have been removed]
2010-03-29 by York Luethje
Hi Joseph, The Mini-Case has 4 slots on its power supply and can fit a maximum of 32 TE of modules. You may want to give the low-cost cases some consideration. You'll get either 168 TE or 252 TE of module space and have an open-ended system that you can fill up as you find out wh
2010-03-29 by asheever@ymail.com
Hi All, I am a new member here. I am big fan of analogue sytnhs and I own few old stuffs. I ve bought finally the Dark energy because its offer quite a bit of modulation option in the small rack and CV/Midi transfer. anyway I crash into straight away do I ve decided to buy some m
2010-03-29 by Shrewsbury Marie
Thank you, you are a little star! :D I'll try that later. --- On Mon, 3/29/10, Florian Anwander wrote: From: Florian Anwander Subject: Re: AW: [Doepfer_a100] A112 Sampler Osc questions To: Doepfer_a100@yahoogroups.com Date: Monday, March 29, 2010, 10:59 AM Hi >> The software uplo
2010-03-29 by Florian Anwander
Hi Keld > ...The prophet 5, the Obxa... This just comes to my sight: Initial Gain does not make sense at polyphonic synths, because you would have humming all voices all the time - no matter, whether their actual note fits in the played chord or not. At polyphonc synths it had to
2010-03-29 by KeldS
That's just the point. A lot of us started out on hardwired synths - and switched to modulars later - and getting confused by not being able to turn the sound of.... because the gain of the final VCA was above zero. That seems to be Dieters problem with users too. Keld --- In Doe
2010-03-29 by Florian Anwander
Hi Keld > All modulars have but not hardwired synths. Nearly all the monophonic Rolands had it - typically named "Hold": SH1 SH3 SH5 have it as potentiometer. SH2 SH09 and SH101 only as a switchposition. The System 100 named it "initial Level". System 100m and System 700 had no d
2010-03-29 by Bakis Sirros
the arp Odyssey, actually, has an initial gain slider. also, the Doepfer A132 does not have an initial gain knob, of course... Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallel
2010-03-29 by Florian Anwander
Hi >> The software uploader/dumper won't run on my computer as it says >> it's missing CTL3D.dll, though there isn;t a file by that name in >> the download. > > I'm not the software specialist but I remember that we had the same problem > with the Drehbank editor. Please look at
2010-03-29 by yahoo@doepfer.de
> The software uploader/dumper won't run on my computer as it says > it's missing CTL3D.dll, though there isn;t a file by that name in > the download. I'm not the software specialist but I remember that we had the same problem with the Drehbank editor. Please look at the FAQ page
2010-03-29 by yahoo@doepfer.de
> I think the A110 procedure mostly goes for the A111 too. > The A110 version is here: http://www.doepfer.de/a110_tec.htm > I'm not sure though... That's true. And we have a pdf document on the A-111-1 info available named "short version of the adjustment procedure". It's always
2010-03-29 by Guy
Those are all pre-patched synths. That doesn't count, honey ;-) It wouldn't surprise me that the "demise of Initial Gain" in preset and/or typical keyboard synths has begun when those manuf's got all their prototypes back with a note saying something like "hey, I can't switch it
2010-03-29 by KeldS
Well i guess it's there but if you look on a Minimoog the VCA doesn't seem to have an initial gain pot. The prophet 5, the Obxa and arp odyssey have non either - just to name a few. All modulars have but not hardwired synths. Keld > > "Initial Gain" is not a common feature [on a
2010-03-29 by yahoo@doepfer.de
> Is there, or will there be a [support] forum for the DIY kit ? > Administrated or not by Doepfer. > > If there isn't, anyone considering it ? > > > And... > Why is there no initial gain on the VCA ? > > > cheers, > _g We have no plans for a DIY kit forum. And I have to point ou
2010-03-29 by Guy
Hi DIeter, My comments are inline. --- In Doepfer_a100@yahoogroups.com, wrote: > > > Is there, or will there be a [support] forum for the DIY kit ? > > Administrated or not by Doepfer. > > > > If there isn't, anyone considering it ? > > > > > > And... > > Why is there no initial
2010-03-28 by achtung_999
I think the A110 procedure mostly goes for the A111 too. The A110 version is here: http://www.doepfer.de/a110_tec.htm I'm not sure though... On Sun, Mar 28, 2010 at 11:51 PM, paulshillito wrote: > > > Hi, > > I bought a couple A-111 VCO's but the tracking on them is way out (didn
2010-03-28 by achtung_999
Well, first of all... don't expect crisp clean playback ;-) I have one way of working with the wavetable mode: Do you have an A176 (or something similar from another manufacturer) ?? Try setting the offset for the end of the loop with that and the atten. knob on the a112. So >>>
2010-03-28 by Florian Anwander
Alesis is sold too Florian Anwander wrote: > Hello, > > spring clean is asking its tribute... > > - Alesis Multimix 16 FW - 260 Euros plus shipping > > - Ibanez UE-405 analogue MultiFX - 150 Euros plus shipping > Includes beautiful sounding analogue delay and chorus. I bought thi
2010-03-28 by paulshillito
Hi, I bought a couple A-111 VCO's but the tracking on them is way out (didn't know this until i built my new system), is there a technical calibration procedure somewhere on the Doepfer site or do I have to send them back to the factory to be setup again and if so how much does i
2010-03-28 by Guy
Is there, or will there be a [support] forum for the DIY kit ? Administrated or not by Doepfer. If there isn't, anyone considering it ? And... Why is there no initial gain on the VCA ? cheers, _g
2010-03-28 by propane23
I've got this working ok in normal sample record/playback mode, but the wavetable stuff is giving me gyp. The software uploader/dumper won't run on my computer as it says it's missing CTL3D.dll, though there isn;t a file by that name in the download. Have tried recording into it
2010-03-27 by yahoo@doepfer.de
> is the 1200 ma PSU a drop in replacement for the 650 ma in a portable > case or would i have to start drilling holes and shit? (i won't do > that!). the extra power would be useful. > > Richard The replacement requires no drilling (the positions of the bolts and the dimensions
2010-03-27 by yahoo@doepfer.de
> i also put my A108 audio input (of all 3 A108's of mine) to > around 9 o'clock for non-distorted input. > so, i think this behavior of the A108 is normal and not defective. I was not in the company yesterday as I had to attend a boring "safety at work" seminar because of the Ge
2010-03-27 by Bakis Sirros
hello, so, still WTB: the following system-100m modules/items: 121 Dual VCF, i can offer up to 400 euros 173 Quad Signal Gate, i can offer up to 570 euros 174 EQ, i can offer up to 700 euros 112 Dual VCO, i can offer up to 400 euros 184 keyboard, i can offer up to 600 euros pleas
2010-03-26 by Monroe Eskew
Why not just wait for the A-190-3. 4 voice polyphony in one module. On Fri, Mar 26, 2010 at 10:55 AM, Stefan wrote: > > > Hi, > > I want to play polyphonic with 3 VCO's. Is this possible with these three > modules? : > > 2 x A-190-1 > 1 x A-190-2 > > In A-190-1 one can adjust the
2010-03-26 by Stefan
Hi, I want to play polyphonic with 3 VCO's. Is this possible with these three modules? : 2 x A-190-1 1 x A-190-2 In A-190-1 one can adjust the highest and lowest note by ASSIGN MODE (Performance-Menu, No. 4). With that I can play two different notes simultaneously. Is it possible
2010-03-26 by Richard Scott
Hi is the 1200 ma PSU a drop in replacement for the 650 ma in a portable case or would i have to start drilling holes and shit? (i won't do that!). the extra power would be useful. Richard
2010-03-26 by Bakis Sirros
i do not think its a design flow...(Dieter?) after 9 o'clock (and in combi with the resonance knob) is where all the fun starts.... :-) Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/
2010-03-26 by Florian Anwander
Hi > Same here.. >> i also put my A108 audio input (of all 3 A108's of mine) to around 9 >> o'clock for non-distorted input. >> so, i think this behavior of the A108 is normal and not defective. If Dieter won't have the time to answer today, I'll have a look at the schematics at
2010-03-26 by achtung_999
Same here.. On Fri, Mar 26, 2010 at 11:53 AM, Bakis Sirros wrote: > > > i also put my A108 audio input (of all 3 A108's of mine) to around 9 > o'clock for non-distorted input. > so, i think this behavior of the A108 is normal and not defective. > > > Bakis Sirros - Parallel World
2010-03-26 by Bakis Sirros
i also put my A108 audio input (of all 3 A108's of mine) to around 9 o'clock for non-distorted input. so, i think this behavior of the A108 is normal and not defective. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - world
2010-03-26 by Florian Anwander
Hi Jari replacing the potentiometer doesn't change anything. I don't have the schematics of the A108 here, but there is usually an input opamp, which has assumingly a too high amplification due to a defective or wrong feedback resistor. For dedicated error tracing some measuring
2010-03-26 by jalmari3
I have a question regarding A-108 pots. My A-108 audio input is very sensitive to distortion. Often I set the Audio Level knob below 9 o'clock and then dialing the "right" sound is difficult. The pot is A50K, which I assume means the attenuation is already non-linear. Is there a
2010-03-26 by davevosh@aol.com
hello to all, for sale elby designs / ian fritz ed108 chaquo. $175 good condition, works fine i`ll pay shipping in u.s. paypal, check, m.o. thanks, dave p.s. - also (frac) blacet filthy filtre $90 (both $250) [Non-text portions of this message have been removed]
2010-03-25 by Bakis Sirros
G6 case sold, i'm keeping the A185 bus access module. thanks, Bakis.
2010-03-25 by Bakis Sirros
FINAL PRICE DROP: Doepfer A100G6 with New PSU (1200mA rating per rail) 230volts, price is 62% of new: 229 euros only!! plus 29 euros shipping, plus 3% paypal fees.available Only in EU. the price is ridiculous, considering its new price is 370 euros... Bakis > Date: Wednesday, Mar
2010-03-24 by Bakis Sirros
even lower price: Doepfer A100G6 with New PSU (1200mA rating per rail) 230volts, price 67% of new: 248 euros. shipping is 29 euros, plus 3% fees. EU only. (the new price of this aluminum case is 370 euros!) Doepfer A185 Bus Access module, price 60% of new: 27 euros, plus 8 euros
2010-03-24 by Florian Anwander
The Ibanez is sold. The Alesis is still available. (This is a great 16 fold A/D converter!) Florian Anwander schrieb: > Hello, > > spring clean is asking its tribute... > > - Alesis Multimix 16 FW - 260 Euros plus shipping > > - Ibanez UE-405 analogue MultiFX - 150 Euros plus shi
2010-03-24 by Florian Anwander
Hello, spring clean is asking its tribute... - Alesis Multimix 16 FW - 260 Euros plus shipping - Ibanez UE-405 analogue MultiFX - 150 Euros plus shipping Includes beautiful sounding analogue delay and chorus. I bought this one from Jan-Hinnerk on AH. The connector for the remote