Yahoo Groups archive
Messages
Page 150 of 564 · 28179 messages matched
2010-03-16 by Pierre
Extra. Thank U very much Florian, --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hello Pierre > > > Do you think it's possible to multiply a clock signal with a PLL ? > Yes. This is what the module is basically intended for. > > If the clock is very low frequenc
2010-03-16 by yahoo@doepfer.de
> Does the input of the A-119 accepts 48v ? > Thanks > Simon No. It's limited to -12V....+12V. You have to add an attenuator (e.g. A-183-1). Best wishes Dieter Doepfer
2010-03-16 by achtung_999
Thanks so much Dieter! Shows again that you really listen to us, your customers! I'm proud you're taking my idea into serious consideration ;-) (and all the great additions the people on this list added!) grtzz Ernst On Tue, Mar 16, 2010 at 12:01 PM, Bakis Sirros wrote: > > > yes
2010-03-16 by Richard Horsman
Thanks Dieter > Quick question... Can the rails that come with this kit be > screwed into the top and bottom of a wooden case rather than > being fixed by screwing in from the side? I want to make a 168HP > wide box with the rails butted up next to eachother in the middle. > > Th
2010-03-16 by yahoo@doepfer.de
> Quick question... Can the rails that come with this kit be > screwed into the top and bottom of a wooden case rather than > being fixed by screwing in from the side? I want to make a 168HP > wide box with the rails butted up next to eachother in the middle. > > Thanks > > Rich
2010-03-16 by Pierre
Hi all, Do you think it's possible to multiply a clock signal with a PLL ? Cheers, Pierre
2010-03-16 by Bakis Sirros
yes, that would be great. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk w
2010-03-16 by yahoo@doepfer.de
> Okay, thanks. > I want to switch between at least ten different audio signals > going into four different "effect-chains". > So lets say that the audio signal goes into the A-119, then into > the A-182 and then sending four signals to two A-150. > Now it's possible to distribut
2010-03-16 by david.salter@thomsonreuters.com
That's great Dieter, this will be a very useful module. David * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant SSG UKI Thomson Reuters O +44 (0)20 7542 2402X 52402 M 07990562402 david.salter@thomsonreuters.com thomsonreu
2010-03-16 by Simon
Does the input of the A-119 accepts 48v ? Thanks Simon --- In Doepfer_a100@yahoogroups.com, "Simon" wrote: > > Okay, thanks. > I want to switch between at least ten different audio signals going into four different "effect-chains". > So lets say that the audio signal goes into th
2010-03-16 by yahoo@doepfer.de
> Hi, > > thanks for making the picture available again. > I think it looks quite good although the labels are missing. > Looks way better than the MW case version. > > Personally I would prefer a version with a 2 x 4 Multiple > (my A-180s were 1 x 8 by default) and a A-183-1, bo
2010-03-16 by yahoo@doepfer.de
> The following Doepfer_a100 poll is now closed. Here are the > final results: > > > POLL QUESTION: Would you buy the Doepfer A160-2 divider module > with Uneven (Odd) clock divisions? > > CHOICES AND RESULTS > - Yes, and i would prefer the one with all divisions /2 /3 /4 /5 > /6
2010-03-16 by grimshaw_stuart
have the roadies seen it yet? looks absolutely brilliant, nick. what does it look like closed? stu
2010-03-16 by peter.erikson
Super! A solution that will please everyone! I am really looking forward to this module! //Peter --- In Doepfer_a100@yahoogroups.com, wrote: > > > The following Doepfer_a100 poll is now closed. Here are the > > final results: > > > > > > POLL QUESTION: Would you buy the Doepfer A
2010-03-16 by richyho@btopenworld.com
Quick question... Can the rails that come with this kit be screwed into the top and bottom of a wooden case rather than being fixed by screwing in from the side? I want to make a 168HP wide box with the rails butted up next to eachother in the middle. Thanks Rich
2010-03-16 by Simon
Okay, thanks. I want to switch between at least ten different audio signals going into four different "effect-chains". So lets say that the audio signal goes into the A-119, then into the A-182 and then sending four signals to two A-150. Now it's possible to distribute the audio
2010-03-16 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Would you buy the Doepfer A160-2 divider module with Uneven (Odd) clock divisions? CHOICES AND RESULTS - Yes, and i would prefer the one with all divisions /2 /3 /4 /5 /6 /7 /8 /9 (8 outputs
2010-03-15 by Joachim
Hi, thanks for making the picture available again. I think it looks quite good although the labels are missing. Looks way better than the MW case version. Personally I would prefer a version with a 2 x 4 Multiple (my A-180s were 1 x 8 by default) and a A-183-1, both with labellin
2010-03-15 by Nick
Hi Dave I phrased it carefully: You did the encouragement; Maise did the help by sending me offcuts of the rails. Thanks in advance for the recordings. Cheers, Nick
2010-03-15 by davevosh@aol.com
Five months after getting The Cupboard (designated a PMC6), I have finally finished converting it. My thanks to group members Maise and Dave Vosh for their help and encouragement. Here's a snap: _http://www.snap-http://www.http://wwhttp://www.snaphtt_ (http://www.snap-dragon.com/
2010-03-15 by yahoo@doepfer.de
> Hi, > > I have just come across the the A-111-2 Dynamic VCO page from a > google web search but I can't find any other reference to it on > the Doepfer site. > > So really the question is, is it going to be available or has it > being dropped for some reason?, have I just stumb
2010-03-15 by yahoo@doepfer.de
> Thanks for the fast reply. > What about a trigger signal ? > I will use the A-150 as a gate for audio signals and control > which output should be enabled. It's important for me to control > it from Max/Msp. > > Thanks. > Simon If you have an interface available that generates
2010-03-15 by Simon
Thanks for the fast reply. What about a trigger signal ? I will use the A-150 as a gate for audio signals and control which output should be enabled. It's important for me to control it from Max/Msp. Thanks. Simon --- In Doepfer_a100@yahoogroups.com, wrote: > > > Hi > > I was won
2010-03-15 by paulshillito
Hi, I have just come across the the A-111-2 Dynamic VCO page from a google web search but I can't find any other reference to it on the Doepfer site. So really the question is, is it going to be available or has it being dropped for some reason?, have I just stumbled across a def
2010-03-14 by Mark Pulver
Up on eBay in a 5 day auction... Evenfall Minimodular http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170459372181 This isn't a re-listing, I had two of these. This one has larger knobs installed over the stock shafts. Thanks for thinking about it! Mark
2010-03-14 by Steve
Thanks Nick...Mike also sent me a couple of notes back directly. Cheers ________________________________ From: Nick To: Doepfer_a100@yahoogroups.com Sent: Sun, March 14, 2010 2:59:31 PM Subject: [Doepfer_a100] Re: Livewire Dual Cyclotron connect to Doepfer Case- Ribbon Cable Hi S
2010-03-14 by Nick
Hi Steve I was hoping you would get more authoritative answers, but in the absence of, I wired my only Liverwire module red stripe down and it works. The only module I have which is stripe up is a Cwejman. Cheers, Nick
2010-03-14 by Bakis Sirros
review from electroambientspace.com: Interconnected “Current Flow” (http://www.myspace.com/interconnectedmusic, 2010) 9 tracks, 49 mins Bakis Sirros (Parallel Worlds) and Ingo Zobel form Interconnected, an electronic music duo forged by a love of all things analog and modular, cr
2010-03-13 by achtung_999
On Doepfer modules it's red strip down on the case and the module yes.. But I don't know how the other manufacturer wired its module. So check this before connecting! Basically you can check the standard Doepfer uses here: http://www.doepfer.de/a100_man/a100t_e.htm Scroll down to
2010-03-13 by james.husted@mac.com
I just went there and it worked for me - no problems. I just posted it to the Photos section of the Yahoo Group. -James On Mar 13, 2010, at 8:36 AM, yahoo@doepfer.de wrote: >> i get this: >> >> >> "Error 404 - Not found >> >> Die angegebene Seite konnte nicht gefunden werden." >
2010-03-13 by yahoo@doepfer.de
> i get this: > > > "Error 404 - Not found > > Die angegebene Seite konnte nicht gefunden werden." Sorry - it has been deleted apparently as it is a dead link in the meantime (i.e. no other page of our website includes as link to the picture). I have transferred it again manually
2010-03-13 by John V. Talbert
Just curious, has anyone seen this module for sale anywhere yet? I've checked six online retailers so far and there's no sign of it, even after 5 weeks. Or maybe I'm just too anxious! :-> John On Wed, Feb 10, 2010 at 7:20 AM, wrote: >> > Hi, >> > >> > I hope the manual will be re
2010-03-13 by stevebdar
Hi: I have already fried another manufacturers module in my Doepfer case. My recent acquisition of a Livewire Dual Cyclotron came with the ribbon cable not attached. This is a Series 1 which has the board perpendicular. It fits in my case fine. Do I install the red strip down on
2010-03-13 by Richard Scott
i get this: "Error 404 - Not found Die angegebene Seite konnte nicht gefunden werden." yahoo@doepfer.de wrote: > > > > Is there a picture of this prototype somewhere? > > Yes: www.doepfer.de/A100P6_with_2_A180.jpg > > Best wishes > Dieter Doepfer > > -- I am using the free versio
2010-03-13 by yahoo@doepfer.de
> Is there a picture of this prototype somewhere? Yes: www.doepfer.de/A100P6_with_2_A180.jpg Best wishes Dieter Doepfer
2010-03-13 by Bakis Sirros
hi list, only TWO days left for the A106-2 Odd Divisions pulse divider Poll to close. Votes are still only 50... Please, take few seconds to vote for this poll, to make it really valuable for Doepfer's future modules decisions. thanks, Bakis. Bakis Sirros - Parallel Worlds / Inte
2010-03-12 by John V. Talbert
For anyone that's interested, I've uploaded pictures of both the smooth and grained case finishes with an additional side-by-side comparison. http://groups.yahoo.com/group/Doepfer_a100/photos/album/763015809/pic/list Kindest regards, John On Thu, Mar 11, 2010 at 4:00 PM, John V.
2010-03-12 by Richard Scott
Insane and wonderful NIck I hope my Frequensteiner is happy there too! Richard Nick wrote: > > > Hi all > > Five months after getting The Cupboard (designated a PMC6), I have > finally finished converting it. > > My thanks to group members Maise and Dave Vosh for their help and >
2010-03-12 by Joachim
Hi there, at Muffs the following quote from Dieter catched my eye: ---Quote from Dieter--- the upper and lower bars of the A-100 suitcases have no function. Our manufacturer told us that they are necessary for the case building because of the rivets that are used to hold the prof
2010-03-12 by Nick
Hi all Five months after getting The Cupboard (designated a PMC6), I have finally finished converting it. My thanks to group members Maise and Dave Vosh for their help and encouragement. Here's a snap: http://www.snap-dragon.com/_private/synth/cg19PMC6.jpg Must get a new camera.
2010-03-12 by Mark Pulver
Prices tweaked again: http://midiwall.com/forsale/ Analogue Systems RS40: Noise generator Blacet Darkstar Chaos BZ2300: Binary Zone FF2030: Filthy Filtre MW2090: MiniWave with Socket Rocket MX2040: Mixer TM2050: Time Machine QV2200: Quad VCA *** All Blacet modules were bought fac
2010-03-12 by selfoscillate
rs360 has been sold too. thanks and best wishes ingo --- In Doepfer_a100@yahoogroups.com, "selfoscillate" wrote: > > > hello guys, > > rs80 is sold. > rs360 is still available. > > thanks and best wishes > > ingo > > > > --- In Doepfer_a100@yahoogroups.com, "selfoscillate" wrote:
2010-03-12 by yahoo@doepfer.de
> Can anyone tell me which way round the power lead to the 197 module goes? > I cannot see any indication on the circuit board - is it red line > on the left (at the edge of the board) or on the right (next to C2) > > Cheers, Nick The red stripe (-12V) has to show to the edge of
2010-03-12 by yahoo@doepfer.de
> Hi > I was wondering if it's possible to trigger the CV input on A-150 > (dual VCS) with a short audio sound? > This is off course possible on the A-151 - which I all ready own > - but I hope that I can do the same with the A-150? > Thanks > Simon It may work if the level is hi
2010-03-12 by Nick
Thanks Dieter Nick >
2010-03-12 by Nick
Can anyone tell me which way round the power lead to the 197 module goes? I cannot see any indication on the circuit board - is it red line on the left (at the edge of the board) or on the right (next to C2) Cheers, Nick
2010-03-12 by yahoo@doepfer.de
> Thanks for your feedback, Dieter. Personally, I much prefer the > non-grained finish, but it looks like those days are drawing to a > close. > > Kindest regards, > John I'd prefer the non-grained surface too but there is no chance to get them any more. Best wishes Dieter Doepfe
2010-03-12 by Simon
Hi I was wondering if it's possible to trigger the CV input on A-150 (dual VCS) with a short audio sound? This is off course possible on the A-151 - which I all ready own - but I hope that I can do the same with the A-150? Thanks Simon
2010-03-11 by John V. Talbert
I have a P9 (grained) and a P6 (smooth) that I can take pictures of. I'll try and upload them later this evening, just for reference. Kindest regards, John On Thu, Mar 11, 2010 at 12:26 PM, wrote: > Does anyone have a picture of this new texture that they can post? Just curious w
2010-03-11 by John V. Talbert
Thanks for your feedback, Dieter. Personally, I much prefer the non-grained finish, but it looks like those days are drawing to a close. Kindest regards, John On Wed, Mar 10, 2010 at 7:10 AM, wrote: >> Hey folks, >> >> I recently bought a A-100P9 but was quite surprised to find t