Yahoo Groups archive
Messages
Page 183 of 564 · 28179 messages matched
2009-06-13 by jalmari3
As you propably know, an envelope is not necessary with French Connection. But you need a VCA, unless you are going to gate the VCO with the filter. That will sound rather special though.
2009-06-13 by tony.steventon.t21@btinternet.com
Hi Chris The adaptor you have should be ok. Here are some questions: Are you sure the adaptor has an AC output - a DC output would give just one LED on? Have you got your modules plugged in and if so what happens if you remove them? Some thoughts here are if both LEDS come on wit
2009-06-13 by chefgibby
i have two analogue solutions modules and am having trouble attaching them to my dopfer rack any suggestions? who makes a ribbon adaptor that will work?
2009-06-13 by chefgibby
i have two analogue solutions modules and am having trouble attaching them to my dopfer rack any suggestions? who makes a ribbon adaptor that will work?
2009-06-13 by chrismousdale
Hi Guys, im just starting my modular journey and i ordered a Mini Raw wood case and 2x modules.. They arrived yesterday and i read through the guide about the Mini case and the power supply - now i ordered mine from Germany and being in the UK - the PSU was no good (i do have an
2009-06-11 by achtung_999
Go for the A119 external input/envelope follower. Works great. I have 3 of them in my set up. http://www.doepfer.de/a119.htm Gain is also for dynamic mics. On Thu, Jun 11, 2009 at 5:28 AM, chefgibby wrote: > > > any recomendations on a modular to run my bass guitar or roland rs 0
2009-06-11 by zaum
> I believe the drilling is not needed. The beautycases have m3 bolds as > standard don't they? Yes you are right, sorry for the bad info. There isn't a hole spacing issue when you have a case that uses nuts to hold the modules in place. I've only seen the case in photos, but I f
2009-06-11 by RICHARD HORSMAN
Thanks for the comments Florian. I also like the look of the 8HP single boxes. No use at all, but fun all the same! Rich ________________________________ From: Florian Anwander To: Doepfer_a100@yahoogroups.com Sent: Monday, 8 June, 2009 8:34:28 AM Subject: Re: [Doepfer_a100] You
2009-06-11 by james.husted@mac.com
The dimensions for both the rack and for all the different HP panel width can be found on this page: http://www.doepfer.de/a100_man/a100m_e.htm The portable rack version that has the front mounted switch panel has 8 HP less free panel space. The blanking panels are 1,2,4,8, and 4
2009-06-11 by chefgibby
any recomendations on a modular to run my bass guitar or roland rs 09 through even a mic through? studio time fastly approaching and i want my modulars to work this time. gibby
2009-06-11 by chefgibby
does anyone know true dimensions of blanking panels "1 space = what"? i have the rack mount power source and want to completely cover the bottom half plus some of the top until i acquire more modulars any help would be huge thanks gibby
2009-06-10 by ginorobair
Yes -- I said cassette! Actually, we have two limited-edition cassettes from our electro-noise band, Schnüffler. Both feature long-form, textural improvisations featuring Liz on processed trumpet and me coaxing schmutz from some analog synths (including the Blippoo box and Metaso
2009-06-10 by Bakis Sirros
very nice pics! Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk www. musica
2009-06-10 by Bakis Sirros
hi Richard, that should be made off-list. thanks, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/
2009-06-10 by Richard Scott
Hi Stu just checking if the money arrived in your account yet Thanks Richard Stu Grimshaw wrote: > > > > a196 phase öocked loop 49€ > a113 subharmonic generator 160€ > a101-1 steiner vcf 90€ > a101-3 12-stage phaser 210€ > a110 vco (3 available) 90€ > a140 adsr (3 available) 42 >
2009-06-10 by Stu Grimshaw
it breaks my heart, but i can't afford to keep all this stuff, so here a fotodocumentation of the only time i'm going to have to schlepp so much to the domicil club in dortmund :) http://groups.yahoo.com/group/Doepfer_a100/photos/album/112545336/pic/list cheers, stu
2009-06-10 by achtung_999
I believe the drilling is not needed. The beautycases have m3 bolds as standard don't they?
2009-06-10 by zaum
> I think about buying a A100 miniature case wich I could use with my > French Connection from AS. > I think the perfect system for me is : AS RS 95e, A 143-9 QFLO, A124 > WASP FILTER, A132-1. > > I'd like to know if there is any restrictions with the AS module and > the miniatur
2009-06-10 by Monroe Eskew
You can check the current draw figures on the Doepfer and AS website and make sure the minicase's power supply will be enough. You may also want to verify the depth of the modules is not too much for the case. I don't think it would be. However if you are just looking for an inex
2009-06-09 by davevosh@aol.com
bakis, david and dieter, thanks for the recent kind words about my cd`s and dvd`s ! i appreciate your attention to my modest efforts. a bit more detail - the cd that bakis spoke well of was a recording by ed baldi (a modular friend in baltimore, md.) and myself done in ed`s basem
2009-06-09 by Florian Anwander
Hello, I have here a A-100 Service Manual from 1996. This means only the modules of the first generation are contained (list of modules see below). The descriptions in the schematics are english, but ALL WORDS ARE IN GERMAN ONLY! I ask 40 Euros plus shipping. For requests contact
2009-06-09 by chad_kettering
For sale is a custom Frac Rack MOTM 420 filter. It uses the original board from Synthesis Technology but I have added a custom faceplate to fit teh Frac Rack size. Price $295 Photos Here: http://www.flickr.com/photos/15223791@N06/sets/72157615984113862/ Shipping will be added bas
2009-06-09 by Romain Dowska
Hello, I think about buying a A100 miniature case wich I could use with my French Connection from AS. I think the perfect system for me is : AS RS 95e, A 143-9 QFLO, A124 WASP FILTER, A132-1. I'd like to know if there is any restrictions with the AS module and the miniature case.
2009-06-09 by Computer Controlled
If anyone might just HAPPEN to have one they're not using, i'd like to buy it. I know it's a shot in the dark, but i gotta try before i just buy a new one. -Larry
2009-06-08 by Computer Controlled
Just joined up as i'm looking to buy a EuroRack system in the near future. I have a few items i have that i'm looking to trade off for some modules and the DIY kit #1. Looking forward to learning more about modulars and building this system. What i have on offer: Access Virus A d
2009-06-08 by jalmari3
Thanks --- In Doepfer_a100@yahoogroups.com, wrote: > > > My Analogue Solutions ATT4 attenuator has some cross talk between > > channels. Hopefully that will not be problem with A-183-1...? > > Each attenuator of the A-183-1 has it's own pc board. So I don't expect any > crosstalk
2009-06-08 by yahoo@doepfer.de
The first batch of A-111-5 modules arrived (miniature synthesizer voice). The first units will be shipped in the course of this week. Best wishes Dieter Doepfer
2009-06-08 by david.salter@thomsonreuters.com
Hi Bakis/group, I'd also like to give Dave a thumbs up. I recently received a DVD of a performance he and Logan Mitchell in Washington in May. Very cool improvisation work. David * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Con
2009-06-08 by Bakis Sirros
hello list, got Dave Vosh's latest cdr album (40 minutes total) which is an improvisational ambient/abstract work with Ed Baldi on modular synth and Rhodes electric piano and Dave Vosh on modular synth (including the A100, of course) and AM/FM/SW radio. IMHO, it is Dave's best wo
2009-06-08 by yahoo@doepfer.de
> My Analogue Solutions ATT4 attenuator has some cross talk between > channels. Hopefully that will not be problem with A-183-1...? Each attenuator of the A-183-1 has it's own pc board. So I don't expect any crosstalk. The prototype is currently not available because it was shown
2009-06-08 by Florian Anwander
Hi Rich Though they are senseless like anything, I really like the multicolour one module cases: http://2.bp.blogspot.com/_eXfUkcozUik/SireOs5vaGI/AAAAAAAAAJU/urHsILFxjIg/s1600-h/213.bmp Those looke like the field gadgets of some weird scientists. Thomas Dolby would like them for
2009-06-07 by richyho@btopenworld.com
Hi all I thought you might like to take a look at my 'Synthesizer Art' blog. It's 3D artwork based on (predominantly Doepfer) modular synths and keyboards. http://synthesizerart.blogspot.com I'd love it if you left feedback, comments, ideas etc. on the blog Cheers Rich
2009-06-07 by jalmari3
My Analogue Solutions ATT4 attenuator has some cross talk between channels. Hopefully that will not be problem with A-183-1...?
2009-06-07 by simon sterckx
I'm looking for a Doepfer A143-1. Anyone have one they're willing to sell? I don't have any "good trader"-reputation over here yet, but I've got excellent feedback on eBay under the username "arp-2500". Please contact me off-list. Thanks in advance! [Non-text portions of this mes
2009-06-07 by Stu Grimshaw
a196 phase öocked loop 49 a113 subharmonic generator 160 a101-1 steiner vcf 90 a101-3 12-stage phaser 210 a110 vco (3 available) 90 a140 adsr (3 available) 42 a108 48db lpf 105 a106-1 extreme filter 77 a198 ribbon conroller 140 a162 dual trigger delay 39 a170 dual slew l
2009-06-07 by Stu Grimshaw
grimshaw_stuart
2009-06-06 by hpsounds_fr
--- In Doepfer_a100@yahoogroups.com, "hpsounds_fr" wrote: > > Hello, > > I've got some Cwejman, Doepfer and Plan B (as new, with ribbon connectors and screws), shipping only in France and European Union. Here is the link to the post on my website: > > http://www.hpsounds.com/2009
2009-06-04 by hpsounds_fr
Hello, I've got some Cwejman, Doepfer and Plan B (as new, with ribbon connectors and screws), shipping only in France and European Union. Here is the link to the post on my website: http://www.hpsounds.com/2009/06/04/a-vendre-modules-eurorack-cwejman-doepfer-plan-b/ Contact me vi
2009-06-04 by Bakis Sirros
'Shade' album review from Dieter Doepfer of Doepfer Musikelektronik: "I listened to your new album several times during my short vacation. Definitely a masterpiece of modern electronic music and a pleasure to track your musical changes during the last few years from "Insight" via
2009-06-03 by Florian Anwander
Ok After some sleep and cleaning the head from inside :), I see that Dieter is right. It does not matter, where the resistor would be positioned. So the corrected description would be as Dieter wrote it: - Reduce the Capacitor C1. This will cause the attack times to be shorter. T
2009-06-02 by Florian Anwander
Hi Dieter > It's not > possible to insert a fixed resistor to the "maximum" side because it does > not matter if the fixed resistor is added to the max or min side because > both resistance values (fixed + potentiometer) are always added. You misunderstood me. It definitely does
2009-06-02 by yahoo@doepfer.de
> Hi John, hi Dieter, > > Not completely a separation of the two time rates, but some > approximation (this assumes, that the potentionmeters are not used as > electrical potentiometers, but as variable resistors): > - Reduce the Capacitor > - Insert a fixed resistor (lets say 20
2009-06-02 by Florian Anwander
and test back (sorry) Florian Anwander schrieb: > and some short test, which should not be ignored, by anyone.... ;)
2009-06-02 by yahoo@doepfer.de
> the A-183-3 amplifier looks like a useful utility module Dieter. I'm > often wishing I had something simple like that onboard - In practise > whether x4 is really enough for audio I'm not sure... maybe > > Richard Within the A-100 or connected to other modular systems x4 should
2009-06-02 by david.salter@thomsonreuters.com
Florian, Looked the same for me and then I clicked sort by date and it looks fine. David * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant SSG UKI Thomson Reuters O +44 (0)20 7542 2402X 52402 M 07990562402 david.salter@th
2009-06-02 by Florian Anwander
and some short test, which should not be ignored, by anyone.... ;)
2009-06-02 by Florian Anwander
Hi, Maybe it is only me, but I cannot find the latest postings to the group in Yahoos Webinterface: http://launch.groups.yahoo.com/group/Doepfer_a100/messages shows James posting about AS-modules from last Monday(!) as latest posting! Can anyone confirm this? Florian
2009-06-02 by Florian Anwander
Hi John, hi Dieter, Not completely a separation of the two time rates, but some approximation (this assumes, that the potentionmeters are not used as electrical potentiometers, but as variable resistors): - Reduce the Capacitor - Insert a fixed resistor (lets say 20% of the poten
2009-06-02 by yahoo@doepfer.de
> Hi Floris, > > > the sounds that go in are less loud than normal doepfer vco's > or noise sources, would it be possible to have those sounds as > loud as the vco's etc by modding the filter module? > > There is a 27k resistor immediately after the audio in 'level' > pot (betwee
2009-06-02 by Richard Scott
the A-183-3 amplifier looks like a useful utility module Dieter. I'm often wishing I had something simple like that onboard - In practise whether x4 is really enough for audio I'm not sure... maybe Richard yahoo@doepfer.de wrote: > > > > > Hi Andreas et al, > > > > I've seen the