Yahoo Groups archive
Messages
Page 181 of 564 · 28179 messages matched
2009-06-29 by yahoo@doepfer.de
> Kenton just released a USB to MIDI converter. Who will be the first to > make a Euro Rack version? Doepfer? > > http://www.kentonuk.com/digital_interfaces_converters/midi_cv_conv erters_extras/usbsolo.html -James The final version of the A-190-3 will be equipped with USB. And e
2009-06-29 by tony.steventon.t21@btinternet.com
Hi The TLO6x series and TL07x series are functionally equivalent so you should be safe to swap. Where they differ is in performance: The TL06x is a low power device and is not optimised for low distortion, low noise or signal bandwidth whereas the TL07x series is but it draws 1.4
2009-06-29 by Mark Pulver
Prices Reduced! Everything hits eBay on Wednesday... Please help me from going mad! :) --- All the info is here: http://midiwall.com/forsale/ Please read the NOTES section Contact me **OFF-LIST** with comments/questions! Mark
2009-06-28 by mirror_saw7778
After changing the TL064CN in my A119 to a TL074IN and noticing an improved high frequency response and clearer sound I am thinking of doing the same to my A134 VC Panner/Crossfader. The A134 contains a TL064CN and a TL062CP - are both in the audio path? Is it safe to swap these
2009-06-28 by bty205236
Hi there, My A106-1's cutoff frequency range seems a little limited, unfortunately at it's lowest point it seems to be still in the audible frequency range when the resonance is right up - I'd like to set it a little lower to make it possible to do kick drums with it etc. I've ha
2009-06-28 by stuadh
Hi, I'll take the A-137 Wave Multiplier. I have both Germany and UK postal addresses; whichever is cheapest. Are you anywhere near Dusseldorf? Yours Aye Stuadh --- In Doepfer_a100@yahoogroups.com, "Stu Grimshaw" wrote: > > hallo group, > > here a list of modules for sale. prices
2009-06-28 by zaum
It's interesting that a lot of people are excitedly posting about the Kenton converter without too much thought as to what it's going to do and not going to do, at least based on the webpage. Who knows, maybe I'm missing something myself but I do have some thoughts. Firstly it ha
2009-06-28 by Stu Grimshaw
forgot this: a101/3 12-stage phaser
2009-06-28 by Stu Grimshaw
hallo group, here a list of modules for sale. prices are 70% of doepfer list-price. payment by bank transfer (accounts in germany and england). shipping costs can be calculated here: http://www.dhl.de/dhl?xmlFile=4037 all modules are in good condition. lots of modules here, so pl
2009-06-27 by Bakis Sirros
welcome aboard Brendan. :-) Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk
2009-06-27 by james.husted@mac.com
I just see it as good in the convenience factor and performance factor. The bandwidth of USB is quite a bit higher than MIDI. That means when you have a few of them running off a hub you won't get nearly the delay that you would by chaining a few MIDI>CV converters off a MIDI str
2009-06-27 by Michael
I only looked quickly at that link. It would be awesome if they took advantage of USB and made it higher resolution... otherwise it seems kind of pointless. On Sat, Jun 27, 2009 at 3:12 PM, zombie_tron wrote: > > > > yeah, interesting, i guess they realize so many people have usb
2009-06-27 by zombie_tron
yeah, interesting, i guess they realize so many people have usb keyboards/controllers lying around that it makes more sense to skip the midi. .. and i was just about to buy a MCV.. by the way - this is my first post - thanks for letting me join yer group. -brendan --- In Doepfer_
2009-06-27 by Michael
I know... I was just joking On Jun 27, 2009, at 12:10 AM, james.husted@mac.com wrote: > > > Ok - it was a typo - jeeze The link goes to a USB>CV converter and > nobody else seems to thought about it enough to be making them. > -J > On Jun 26, 2009, at 7:01 PM, Michael wrote: > >
2009-06-27 by achtung_999
or add this to the midi version.. http://www.thomann.de/nl/esi_midi_mate.htm On Sat, Jun 27, 2009 at 2:09 AM, wrote: > > > Kenton just released a USB to MIDI converter. Who will be the first to > make a Euro Rack version? Doepfer? > > > http://www.kentonuk.com/digital_interfaces_
2009-06-27 by techmaster242
Thought I'd share this with the list. I finally bothered making a video of myself at work in the studio. I show off the Doepfer A-137 and how cool it is as a drum effects unit. I also make use of the Harvestman Polivoks. All the drums are custom samples and sequences that are fir
2009-06-27 by james.husted@mac.com
Ok - it was a typo - jeeze The link goes to a USB>CV converter and nobody else seems to thought about it enough to be making them. -J On Jun 26, 2009, at 7:01 PM, Michael wrote: > > > Wow... what will they think of next, A/D and D/A converters? > > On Fri, Jun 26, 2009 at 7:04 PM
2009-06-27 by Logan Mitchell Sr
Hi Elan. I'm interested in the Doepfer A-198 Trautonium Ribbon Controller. Is the price negotiable ? Logan To: Doepfer_a100@yahoogroups.com From: argitoth@gmail.com Date: Fri, 26 Jun 2009 18:35:24 -0500 Subject: [Doepfer_a100] FS/FT: A-198 Ribbon, 6U Case w/DIY Kit #1, A-178 Ther
2009-06-27 by Michael
Wow... what will they think of next, A/D and D/A converters? On Fri, Jun 26, 2009 at 7:04 PM, wrote: > > > Kenton just released a USB to MIDI converter. Who will be the first to > make a Euro Rack version? Doepfer? > > http://www.kentonuk.com/digital_interfaces_converters/midi_cv
2009-06-27 by Computer Controlled
Ha, sorry. I totally thought it WAS off list =o] Bakis Sirros wrote: > ...and now you can continue this conversation off-list, ok? :-) > > > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist > > [Doepfer_a100] group owner > > www. parallel - worlds - music. com > > w
2009-06-27 by Bakis Sirros
...and now you can continue this conversation off-list, ok? :-) Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace
2009-06-27 by james.husted@mac.com
Kenton just released a USB to MIDI converter. Who will be the first to make a Euro Rack version? Doepfer? http://www.kentonuk.com/digital_interfaces_converters/midi_cv_converters_extras/usbsolo.html -James [Non-text portions of this message have been removed]
2009-06-27 by james.husted@mac.com
Kenton just released a USB to MIDI converter. Who will be the first to make a Euro Rack version? Doepfer? http://www.kentonuk.com/digital_interfaces_converters/midi_cv_converters_extras/usbsolo.html -James
2009-06-26 by Computer Controlled
You know what, i'll take the case and power. I see you're in AZ. I'm in Seattle. Argitoth wrote: > Check this thread for pictures: > http://modularsynth.net/viewtopic.php?p=16204#16204 > I'll sell it to you with the case for $150 and free shipping OR just the DIY > Kit #1 for $11
2009-06-26 by Computer Controlled
Where are you located? Argitoth wrote: > Check this thread for pictures: > http://modularsynth.net/viewtopic.php?p=16204#16204 > I'll sell it to you with the case for $150 and free shipping OR just the DIY > Kit #1 for $115 + shipping. > > > [Non-text portions of this message hav
2009-06-26 by Argitoth
*Trade inf**o:* Willing to trade any of the following for a smaller eurorack case or for MOTM/Oakley/Tellun/etc. products. A-198 Trautonium Ribbon Controller: $210 http://www.analoguehaven.com/doepfer/a198/ -new version, perfect condition, hardly used A-178 Theremin: $60 http://w
2009-06-26 by Argitoth
Check this thread for pictures: http://modularsynth.net/viewtopic.php?p=16204#16204 I'll sell it to you with the case for $150 and free shipping OR just the DIY Kit #1 for $115 + shipping. [Non-text portions of this message have been removed]
2009-06-26 by Computer Controlled
What would you sell it for? Argitoth wrote: > Hey, I have a DIY Kit #1 that is already built into a case, but I'm > willing to take it apart. > > > ------------------------------------ > > Yahoo! Groups Links > > > > >
2009-06-26 by Argitoth
Hey, I have a DIY Kit #1 that is already built into a case, but I'm willing to take it apart.
2009-06-25 by Florian Anwander
Hello Greg > I just paged through the maq 16/3 manual, but didn't find any > reference. Do any of the doepfer sequencers do BPM in decimals? I don't own a MAQ 16/3 but as far as I know, it doesn't match 1/10th of bpm. Silas recommendation for the MC-303 can be extended to the EF-
2009-06-24 by Silas Frederik Johansen
I have a Roland MC-303 groovebox with tap tempo that does beats from 40.0 to 240.0 BPM in increments of 0.1 BPM. I often sync my A-155 to it via a MIDI interface - the trick is you program a sequence of notes of equal length on the 303 and tell it to send the track to MIDI, then
2009-06-24 by exportaudio2000
As a brief update... MCV24, 3p, A-166 and A-167 are pending payment or sold! The other items are still available. Thanks to all those who contacted me. Best, Jules --- In Doepfer_a100@yahoogroups.com, "exportaudio2000" wrote: > > Hi > > I'm selling some Euro format modules plus a
2009-06-24 by Greg Cerveny
I just paged through the maq 16/3 manual, but didn't find any reference. Do any of the doepfer sequencers do BPM in decimals? I'm interested in beat matching a clock while DJing. I really need the 1/10th of a bpm to match the sequencer. (I know you can always match the records to
2009-06-24 by exportaudio2000
Hi I'm selling some Euro format modules plus a midi-cv interface. I previously posted a photo of them (with the rest of my system) here: http://www.muffwiggler.com/forum/viewtopic.php?p=47614#47614 Although I'm a bit of a lurker here, I've posted quiet a few times on Muff forum,
2009-06-23 by zaum
Well if you have Parallels already going maybe you should simply try it. I'd plug in the MIDI interface after you have Windows going so Parallels can "capture" it for use when it's seen as a new device being connected. Haven't tried MIDI with it since I set my MacBook up so Paral
2009-06-23 by yahoo@doepfer.de
> I'm curious about the release dates for the "summer 2009" modules. > > A-183-1 Dual Attenuator > A-183-2 Offset-Generator/Attenuator/Polarizer > A-183-3 Amplifier > A-177-2 External Foot Controller II > A-174-2 Wheels > A-138m Matrix Mixer > > I really, really, really need a Ma
2009-06-23 by ysinollaysi
I'm curious about the release dates for the "summer 2009" modules. A-183-1 Dual Attenuator A-183-2 Offset-Generator/Attenuator/Polarizer A-183-3 Amplifier A-177-2 External Foot Controller II A-174-2 Wheels A-138m Matrix Mixer I really, really, really need a Matrix Mixer ... or tw
2009-06-23 by achtung_999
ah I see you already found the thread... On Tue, Jun 23, 2009 at 2:38 AM, achtung_999 wrote: > Hello John, > > A certain guy called Daniel seems to be busy with making software for OS X > and the A112. > He said he was going to tell the group how far he was with getting to work >
2009-06-23 by achtung_999
Hello John, A certain guy called Daniel seems to be busy with making software for OS X and the A112. He said he was going to tell the group how far he was with getting to work by the 15th of july of this year. here's the last message he send on this: "Howdy A-100 List! Sorry for
2009-06-22 by j_inform3r
Hi supisuzoi, I was looking through my old "synth archive" file yesterday and found a folder I created with your name "supisuzoi" and pics of two of your modules inside. I originally must have grabbed them because I think you have one of the best Frac aesthetics. One photo is of
2009-06-22 by j_inform3r
Wow!! Danny, I couldn't find this thread so I made a recent message. It would be a dream come true if this is released. A lot of people will REALLY appreciate it! Many thanks! In my recent message I also wanted to know if anyone has used Parallel Desktop and tried to connect to t
2009-06-22 by j_inform3r
Hi. I have two questions about using the A-112 Wavetable/Sampler module.... A while back there were two people on this forum who were trying to port the A-112 PC program over to OS X. For the life of me I can't find out what happened. Was it successful? If someone has created a p
2009-06-22 by Bakis Sirros
new great review from Sound Proector website: http://www.soundproector.com/?cat=reviews&id=207 and a small extract of the album review: "Shade to my pure personal opinion, can already be considered one of the best albums of 2009. There is few such incredible, tangible music nowad
2009-06-19 by Florian Anwander
Hi Greg > I was thinking the a152 will do a lot for me as a cv record & playback > "sequencer," mainly because of the built-in 8 way multiplexer. But > then I just realized, while it will save 8 voltages, the next time it > is addressed/switched via clock signal, the voltage is r
2009-06-19 by Greg Cerveny
And by a145 i mean a148... On Fri, Jun 19, 2009 at 11:06 AM, Greg Cerveny wrote: > Thanks Florian! I knew I asked in the right place. That helped a > lot. The t&h vs s&h was something I was definitely missing. > > I was thinking the a152 will do a lot for me as a cv record & play
2009-06-19 by Greg Cerveny
Thanks Florian! I knew I asked in the right place. That helped a lot. The t&h vs s&h was something I was definitely missing. I was thinking the a152 will do a lot for me as a cv record & playback "sequencer," mainly because of the built-in 8 way multiplexer. But then I just reali
2009-06-19 by achtung_999
Great explaination Florian! On Fri, Jun 19, 2009 at 12:25 PM, Florian Anwander wrote: > > > Hi Greg > >> I'm not sure I fully understand track & hold, so I thought I'd ask... >> >> I am thinking of using the t&h module with a clock divider and a >> roland sh-2. First, record in a
2009-06-19 by Florian Anwander
Hi Greg > I'm not sure I fully understand track & hold, so I thought I'd ask... > > I am thinking of using the t&h module with a clock divider and a > roland sh-2. First, record in a series of voltages from the sh-2 > keys, then have the track&hold play them back. With the clock
2009-06-19 by davemodu
In Perfect Conditions , use in non-smoking environment!! Price- Euro 196 method of payment: banking transfer Shipping price depends on location
2009-06-18 by floppy
looking for a Palmer RMC in good working condition. Cosmetic doesnt matter, just the pots and faders should be crackle free. im in germany, offers from europe are welcome.