Yahoo Groups archive
Messages
Page 180 of 564 · 28179 messages matched
2009-07-10 by yahoo@doepfer.de
> Thank you, I had a friend with much more knowledge of these > components take a look at the chip and he said that since the pin > is bent under the chip it was probably still making contact with > the socket. The module was working without any problems, so that > is a relief. >
2009-07-10 by yahoo@doepfer.de
> I programmed a patch with my beautifully tuned VCOs, tonight. > When I decided to use the A155 through a 156 to drive it, I > noticed a significant voltage drop and I had to apply a voltage > from the 176 to bring it back in tune with my other synth. Why > should this be? > > I
2009-07-09 by brian
Cleaning house again. All units in fully functioning order. never left the studio. rack rash at worse. A-106-1 Xtreme Filter - $100 model 25 - multi-tasking audio processor - $195 diy - lockhart/grinder(cgs design from bridechamber-euro format) - $50 the above unit aint pretty. r
2009-07-09 by stuadh
I programmed a patch with my beautifully tuned VCOs, tonight. When I decided to use the A155 through a 156 to drive it, I noticed a significant voltage drop and I had to apply a voltage from the 176 to bring it back in tune with my other synth. Why should this be? I have also not
2009-07-09 by justin3am
Thank you, I had a friend with much more knowledge of these components take a look at the chip and he said that since the pin is bent under the chip it was probably still making contact with the socket. The module was working without any problems, so that is a relief. My next que
2009-07-09 by yahoo@doepfer.de
> I have an A-188-1 1024 stage BBD module. I'm replacing the 1024 > stage BL3207 chip with a 4096 stage MN3005, and I'm wondering > about bent pins. On the BL3207 the bottom right most (8th?) pin > is bent up, should the same pin on the MN3005 also be bent so as > not to make a c
2009-07-09 by yahoo@doepfer.de
> My A-144 Morph controller seems to be dead. Is there a common thing > that happens to them if mistreated that may kill them? I have thought > about just swapping out all the ICs but the only dual OP-Amps I have > hanging around are 4560's and not the MC1458 that are in them. Wo
2009-07-09 by Stu Grimshaw
hi group, below is a list of the modules still available. uk people: i'm preparing a big communal parcel to england to reduce costs (uk bank account also available), so if you're thinking about it, think quick :) rest of the world: german account. prices are 70% of these doepfer
2009-07-09 by jared
Quit double-posting-you're messin up the whole system! ;-) Good to see round these parts brother. Unfortunately, and predictably, I don't have an answer to your question. Jus thought I'd pop in a say whadup. Good luck with the chip replacement! -- Jared Dunne http://www.22tape.bl
2009-07-09 by justin3am
I have an A-188-1 1024 stage BBD module. I'm replacing the 1024 stage BL3207 chip with a 4096 stage MN3005, and I'm wondering about bent pins. On the BL3207 the bottom right most (8th?) pin is bent up, should the same pin on the MN3005 also be bent so as not to make a connection?
2009-07-09 by justin3am
I have an A-188-1 1024 stage BBD module. I'm replacing the 1024 stage BL3207 chip with a 4096 stage MN3005, and I'm wondering about bent pins. On the BL3207 the bottom right most (8th?) pin is bent up, should the same pin on the MN3005 also be bent so as not to make a connection?
2009-07-09 by james.husted@mac.com
My A-144 Morph controller seems to be dead. Is there a common thing that happens to them if mistreated that may kill them? I have thought about just swapping out all the ICs but the only dual OP-Amps I have hanging around are 4560's and not the MC1458 that are in them. Would the
2009-07-08 by Stu Grimshaw
top of my list is the wasp filter. it's got the three filter shapes you need, plus it distorts excellently with audio sources when you want that. (the distortion module is great for oscillators that have a consistent output level, thus allowing small doses of distortion when need
2009-07-07 by achtung_999
Hey Greg, The envelope follower generates an envelope that follows the input amplitude (duh!). The control voltage coming out can be used to control filters.. But also other modules like the A136 etc. You can even use it in combination with a voltage inverter and a VCA to do some
2009-07-07 by Greg Cerveny
Hey All, Thanks for all the responses. Just to collect them: Distortion: a-136 Bit crusher: a-189-1 Envelope follower: a-119 Ring mod: a-114 Pitch Shift: a-126? anything else? Delay: a-188-2? Spring Reverb: a-199 How is the envelop follower used on the drums? It generates an enve
2009-07-07 by Bakis Sirros
yes, that too! Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk www. musicam
2009-07-07 by achtung_999
The A199 spring reverb is a winner too on drumsounds. On Tue, Jul 7, 2009 at 9:22 AM, Bakis Sirros wrote: > > > > the A136 distortion/waveshaper module is also great with drums. > > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist > [Doepfer_a100] group owner > www.
2009-07-07 by Bakis Sirros
the A136 distortion/waveshaper module is also great with drums. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace
2009-07-07 by dustin sedlacek
delay delay delay delay I use 2 or 3 or 4 different delays at once to generate new grooves. On Tue, Jul 7, 2009 at 12:57 AM, wrote: > Sonic alienator!! > Sent on the Sprint� Now Network from my BlackBerry� > > -----Original Message----- > From: Don Kim > > Date: Mon, 6 Jul 2009 2
2009-07-07 by companyofquail@gmail.com
Sonic alienator!! Sent on the Sprint� Now Network from my BlackBerry� -----Original Message----- From: Don Kim Date: Mon, 6 Jul 2009 22:40:55 To: Subject: Re: [Doepfer_a100] Modules for Effect-ing Drums distortion, bit crushers, envelope followrs, ring mods and pitch shifters are
2009-07-07 by Don Kim
distortion, bit crushers, envelope followrs, ring mods and pitch shifters are always fun with drums. On Mon, Jul 6, 2009 at 9:29 PM, Greg Cerveny wrote: > > > Hello All, > > Lately, I am using a roland tr-606 for my drum beats. I find the sound > a bit dull on its own and I reall
2009-07-07 by Greg Cerveny
Hello All, Lately, I am using a roland tr-606 for my drum beats. I find the sound a bit dull on its own and I really prefer it after a few effects. I'm thinking of getting a few modules to run it through, but I'm not sure which ones. I'm guessing a few members of the list are pro
2009-07-06 by achtung_999
I am curious about that one too. I was just inspecting it yesterday.. On Mon, Jul 6, 2009 at 1:54 PM, Mikhail Novikov wrote: > > > Hello! > > After several negative comments about MFB Triple DCO I am now looking > into other compact VCO-s to add to my case. > > Have anyone in gro
2009-07-06 by Mikhail Novikov
Hello! After several negative comments about MFB Triple DCO I am now looking into other compact VCO-s to add to my case. Have anyone in group tried AS 6HP VCO? Are there any other compact VCO-s in the market? Thanks beforehand, Mikhail Novikov
2009-07-06 by Mikhail Novikov
Hello Karl, Have you tried triple VCO? I wonder if it has same problems. Thanks, Mikhail zoog_angelspit wrote: > I Own a Triple DCO...to be honest, I'm not a big fan...my reasons: > > 1) personally, i think it sounds thin. something about the thickness of the waveforms just does
2009-07-06 by Mikhail Novikov
Hello Florian I was asking to see if sound comment refers to DCO or VCO :) Thanks, Mikhail Florian Anwander wrote: > Hello Mikhail > > >> Did you own DCO (VCO-1 AFAIK) or VCO (VCO-2)? >> > It was the "OSC-01". The problem with potentiometers is valid for all > MFB gear I had in m
2009-07-06 by Bakis Sirros
hello, in case anyone is interested for this great new module, the A111-5 mini synthesizer voice module is now available! remember that this module has linear and exponential modulation of the filter cutoff. (quite an unusual feature!) (and, of course, it has exponential modulati
2009-07-06 by Florian Anwander
Hello Mikhail > Did you own DCO (VCO-1 AFAIK) or VCO (VCO-2)? It was the "OSC-01". The problem with potentiometers is valid for all MFB gear I had in my hands. Florian > > Best regards, Mikhail > > Florian Anwander wrote: >> Hello Mikhail >> >> >>> Recently I became interested in
2009-07-06 by Mikhail Novikov
Hello Florian! Did you own DCO (VCO-1 AFAIK) or VCO (VCO-2)? Best regards, Mikhail Florian Anwander wrote: > Hello Mikhail > > >> Recently I became interested in MFB Triple DCO/VCO. They look like a >> good value for their price and 3 osc in this small size is cool. I >> wonder i
2009-07-06 by zoog_angelspit
I Own a Triple DCO...to be honest, I'm not a big fan...my reasons: 1) personally, i think it sounds thin. something about the thickness of the waveforms just does not stack up to the A-110 2) weirdly it goes out of tune...and the tuning goes completely out. This might be because
2009-07-06 by Florian Anwander
Hello Mikhail > Recently I became interested in MFB Triple DCO/VCO. They look like a > good value for their price and 3 osc in this small size is cool. I > wonder if anyone had any experience with any of those. How is general > quality of MFB modules? Is DCO worth it? It is not m
2009-07-06 by Florian Anwander
Hi Stu > a101/3 12-stage phaser Is the phaser still available? Florian
2009-07-06 by Mikhail Novikov
Hello! I know this is Doepfer group, not MFB, but there is no separate MFB group so... Recently I became interested in MFB Triple DCO/VCO. They look like a good value for their price and 3 osc in this small size is cool. I wonder if anyone had any experience with any of those. Ho
2009-07-06 by tony.steventon.t21@btinternet.com
Hi Mikhail, I recently bought a MFB SEQ-02 step sequencer. Its build quality is very good although I had initial reservations when I ordered it because, unlike Doepfer, the front panel is not made of metal - it's made of circuit board material. However don't let that put you off
2009-07-06 by mirror_saw7778
Thanks for the detailed responses. I swapped the TL064CN and a TL062CP for TL074 and TL072 but did not hear a significant difference. I hear something in the high end, a tiny bit more detail but since the test is not blind I don't know if I am making that up. Technically I should
2009-07-05 by intellijel
PostPosted: Sat Jul 04, 2009 9:05 pm Post subject: FS: A whole bunch of Doepfer and some Plan B modules Reply with quote Edit/Delete this post Add User to Ignore List A whole bunch of modules for sale! All in mint condition. I am located in Vancouver Canada and buyer will pay shi
2009-07-04 by dingfutzer
Doepfer A106-5 CEM VCF - $70, -- w/ribbon cable and screws Electra EP 550 VC 12 bit Delay - $99 DOD 845 Reverb - $99 Behringer MDX 4600 Quad Compressor/Limiter - unused in box - $75 (2) 19" Rack Cases - 12 Space 12" deep ATA - ABS plywood, recessed hardware, steel corners, covers
2009-07-04 by Argitoth
I'm selling my Eurorack case for $10 if you're interested. It's not the best case and it needs a DIY Kit #1 as it has no mounting rails nor PSU (recently gutted). Go here for pictures: http://modularsynth.net/viewtopic.php?t=2470 -- www.elanhickler.com
2009-07-03 by achtung_999
Thanks for the warning Sean!I was already toying with the idea of making a small panel with two RCA outs too... And topping that off with a multiple of some sort. hmmm On Fri, Jul 3, 2009 at 9:57 PM, Sean Williams wrote: > > > Hi Ernst > > I keep the tank external too - lets me p
2009-07-03 by Sean Williams
Hi Ernst I keep the tank external too - lets me play the spring itself too but it doesn't always cut the hum. At least you can move it around and make it better. I keep meaning to install some RCA sockets to a small panel but it's OK for now. One word of caution - as Dieter has m
2009-07-03 by achtung_999
Hello. I added an A199 spring reverb to my system today. I really, really love it. Should have gotten this way earlier! It sound sweet and dark. One question though: does anyone have some pictures and/or suggestions on where to mount it in a portable set up? I have a standard Doe
2009-07-02 by Nick Blackburn
Does anyone have an A126 Frequency Shifter they wish to sell? Cheers, Nick
2009-07-01 by yahoo@doepfer.de
> Hi > > just wondering about the progress of this footswitch/controller module? > still due in August or pushed back? > > richard Please refer to message 19089 from June 23, 2009. Best wishes Dieter Doepfer
2009-07-01 by Richard Scott
Hi just wondering about the progress of this footswitch/controller module? still due in August or pushed back? richard -- I am using the free version of SPAMfighter. We are a community of 6 million users fighting spam. SPAMfighter has removed 1225 of my spam emails to date. Get t
2009-07-01 by Argitoth
For Sale: A-178 Theremin, $55 + $10 Shipping -- www.elanhickler.com
2009-06-30 by Os
Hi, some of you may be interested in the recent announcements at http://www.expert-sleepers.co.uk/ For a quick taste: http://www.youtube.com/watch?v=dV2lJ_3vfF4 cheers, os. -- os@collective.co.uk http://www.darkroomtheband.net/ http://www.expert-sleepers.co.uk/
2009-06-30 by Computer Controlled
Looking to sell or trade my A.Sol LFO1 module. It's in perfect condition. Looking to trade for a Doepfer A-145 LFO and an A-131 VCA. Or will sell for $150. I'd like to keep it local to the US. http://www.analogue.org/network/vclfo1.htm -Larry
2009-06-29 by Narudh Areesorn
Hi Dieter, Hopefully, we would to see the polyphonic MIDI interface as an external interface as well, incase I want to save up the precious rack space :-) -----Original Message----- From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of yahoo@doepfe
2009-06-29 by yahoo@doepfer.de
> Hi there, > > My A106-1's cutoff frequency range seems a little limited, > unfortunately at it's lowest point it seems to be still in the > audible frequency range when the resonance is right up - I'd like > to set it a little lower to make it possible to do kick drums with it
2009-06-29 by yahoo@doepfer.de
> After changing the TL064CN in my A119 to a TL074IN and noticing > an improved high frequency response and clearer sound I am > thinking of doing the same to my A134 VC Panner/Crossfader. > > The A134 contains a TL064CN and a TL062CP - are both in the audio > path? Is it safe to