Yahoo Groups archive
Messages
Page 206 of 564 · 28179 messages matched
2009-01-20 by yahoo@doepfer.de
> Florian, I reread what you said and now I understand it better. > > So I want an a-165 to convert a gate into a trigger spike. Does the > A-165 convert both the GATE ON and GATE OFF signals into trigger > spikes? So that's why I need an a-166 to make the A-165 only send out > a
2009-01-20 by Cynthia Webster
Hello Christian Dubuque! Please contact us we're trying to locate you! Thanks, Cynthia http://www.cyndustries.com/
2009-01-20 by Steven Taylor
On 18 Jan 2009, at 19:36, Julian wrote: > > > >>You get LFOs and other CV sources with Volta that in would normally > cost more than the price of a MOTU Ultralite MkIII sound interface. > > The more i read about the Volta, the less i understand the hype... > I allready asked in t
2009-01-19 by Jonas Asher
this same thing happened to me, people suggested MU Metal, i tried it, and its still not working right.......blah On Mon, Jan 19, 2009 at 6:11 PM, aesoteric@talk21.com wrote: > Hey all, > > My Doepfer A-199 spring module has suddenly started distorting. I've > only had it two wee
2009-01-19 by aesoteric@talk21.com
Does yours distort without the tank being in or anywhere near the case? This doen't sound like interference, it sounds like a module problem. But I could be wrong. --- In Doepfer_a100@yahoogroups.com, Jonas Asher wrote: > > this same thing happened to me, people suggested MU Meta
2009-01-19 by achtung_999
Okay that's cool!Thanks for clearing that up. Ernst On Mon, Jan 19, 2009 at 8:13 PM, neil jendon wrote: > > No impedance change. The transformers are 1:1. > > --- On Mon, 1/19/09, achtung_999 > > wrote: > From: achtung_999 > > > Subject: Re: [Doepfer_a100] Re: two basic questions
2009-01-19 by aesoteric@talk21.com
Hey all, My Doepfer A-199 spring module has suddenly started distorting. I've only had it two weeks, and I just got a lovely Accutronics 4 spring tray for it that sounds amazing. Then today, it sounded different, like the reverb signal was going through a fuzz pedal - so I backed
2009-01-19 by Argitoth
I was thinking about creating this for myself: http://www.cgs.synth.net/modules/cgs24_gatetotrigger.html On Mon, Jan 19, 2009 at 1:37 PM, jalmari3 wrote: > This doesn't help with Analogue Systems oscillators, but: > > As I wrote in another forum, the Cwejman oscillators do not st
2009-01-19 by pro2andrius
perfect condition 100 euro including worldwide shipping greetings from madrid Miguel
2009-01-19 by jalmari3
This doesn't help with Analogue Systems oscillators, but: As I wrote in another forum, the Cwejman oscillators do not stop when receiving a gate at their sync input. They just restart (get hard synced) at the upward edge. Perhaps a short trigger is internally generated to achieve
2009-01-19 by neil jendon
No impedance change. The transformers are 1:1. --- On Mon, 1/19/09, achtung_999 wrote: From: achtung_999 Subject: Re: [Doepfer_a100] Re: two basic questions To: Doepfer_a100@yahoogroups.com Date: Monday, January 19, 2009, 12:22 PM Isn't that just what we normally call a DI box? O
2009-01-19 by achtung_999
Isn't that just what we normally call a DI box? On Mon, Jan 19, 2009 at 6:41 PM, Giles wrote: > Thanks! I just ordered one. > > > > > > Try an Ebtech Hum Eliminator. It's a pair of isolation transformers with > 1/4" jacks for i/o. I > keep one in my gig bag for live shows, and it
2009-01-19 by neil jendon
Try an Ebtech Hum Eliminator. It's a pair of isolation transformers with 1/4" jacks for i/o. I keep one in my gig bag for live shows, and it has solved 90% of the hum issues I've encountered.
2009-01-19 by Giles
Thanks! I just ordered one. > > Try an Ebtech Hum Eliminator. It's a pair of isolation transformers with 1/4" jacks for i/o. I keep one in my gig bag for live shows, and it has solved 90% of the hum issues I've encountered. >
2009-01-19 by Giles
Yes, I'm in the US. It's a G6 Rack. It looks like a grounding problem. I put a ground lift on the Doepfer and it's working great now. probably not the best long term solution, but it's working for now. Thanks for your help guys. -Giles > > Hi Giles, are you in the US and are you
2009-01-19 by astroschnautzer
according to rme none of their products offer dc coupling although on their products infosheets they say they are dc coupled, weird. http://www.rme-audio.de/forum/viewtopic.php?id=4551 --- In Doepfer_a100@yahoogroups.com, "Guy Drieghe D." wrote: > > Some quick googling about gave
2009-01-19 by Florian Anwander
Hi Doug >> 1. The modules all seem to have a 60hz hum on output. > Hi Giles, are you in the US and are you running the Doepfer > DIY #1 kit? Wouldn't he call it a "50Hz" hum, if he lived in the US...? Florian
2009-01-19 by yahoo@doepfer.de
> Hi! I'm thinking about getting an A-127 Triple VC Resonance > Filter for my system, and as I tend to use a lot of LFOs for slow > sweeps of different parameters, I got the idea of bringing out > the 3 internal LFOs of the A-127 to separate jacks on a 4HP blind > panel next to t
2009-01-19 by Chris Henkel
...perhaps even easier to use for this purpose would be the AS MT-16 MIDI to trigger module? ...as it happens i still have two of them on offer: http://tinyurl.com/9skpwm ;o) 2009/1/19 Argitoth : > a trigger spike on the GATE ON of the gate signal from my A-190 midi > interface?
2009-01-19 by Argitoth
Florian, I reread what you said and now I understand it better. So I want an a-165 to convert a gate into a trigger spike. Does the A-165 convert both the GATE ON and GATE OFF signals into trigger spikes? So that's why I need an a-166 to make the A-165 only send out a trigger spi
2009-01-19 by Guy Drieghe D.
Some quick googling about gave me this: - all of the Motu interfaces, obviously, excluding the ones with XLR connectors. The Ultralite MkIII seems to be a favourite; also used by Matthew, Volta's designer. - Universal Audio 2192 Master Audio Interface (XLR outputs though) - RME F
2009-01-19 by Doug
Hi Giles, are you in the US and are you running the Doepfer DIY #1 kit? --- In Doepfer_a100@yahoogroups.com, "Giles" wrote: > > Hi, > > I just purchased my first modules and a rack used and I'm trying to > figure a couple of things out. I figured you guys could answer the > quest
2009-01-19 by tkecni
bought it brand new and never put it in the rack, only used on the desk a couple times... i will pack it and ship for $300 anywhere in the US, thanks!
2009-01-19 by parkavenuemusic
I haven't read any of the articles about volta but it will work with other audio interfaces as long as they are DC coupled. That's what one of the guys from motu told me. I don't know how to find out if my interface is DC coupled though. &
2009-01-19 by achtung_999
Hello, A friend of mine did something like that with his A127. He said it is no problem to get the output directly from the place on the board where the LFO outputs. I myself don't own one so I don't know if you can use the switched terminals.. But this seems a good place to me.
2009-01-18 by Korhan Erel
My personal hype is because: I have a small Doepfer system that consists of a Quad LFO, a WASP Filter, a Max/Min module, A Waveform Processor (a-116), a dual VCA and an external input/env follower. This, you may have already guessed, is used for mainly sound processing, but also
2009-01-18 by James Husted
Unfortunately you are correct. The Modular G2 has been discontinued. A real shame. I have one and it is a very cool machine. There was a thread on electro-music.com a while back where posters were talking about the possibility of hacking the G2 to have non-AC coupled outputs. It
2009-01-18 by Florian Anwander
Hi Argitoth > Two more questions, Florian. I need the shortest trigger possible. In > the manual it says, the A-165 creates a 50ms trigger. Is that the > shortest possible? the length is defined by the values of two parts (a capacitor and a resistor). You might replace those part
2009-01-18 by Kylee Kennedy
http://vimeo.com/2850728 Stretta posted this first look on vimeo.. Honestly the VCO autotune/calibration is by far the most important breakthrough in my book. The high resolution output is very nice and something I've heard Stretta explain as a pet peeve about MIDI to CV. I haven
2009-01-18 by bdu@fdiskc.com
Well, for one thing you get finer control than midis 127 steps allow. For another, the control data is sample-accurate locked with your daw. Maybe these things aren't important to you, but they're not insignificant advantages. -Brandon On 1/18/09, Julian wrote: > > >>>You get LFO
2009-01-18 by Henrik Medquist
Hi! I'm thinking about getting an A-127 Triple VC Resonance Filter for my system, and as I tend to use a lot of LFOs for slow sweeps of different parameters, I got the idea of bringing out the 3 internal LFOs of the A-127 to separate jacks on a 4HP blind panel next to the module.
2009-01-18 by Korhan Erel
You get LFOs and other CV sources with Volta that in would normally cost more than the price of a MOTU Ultralite MkIII sound interface. And they will probably release a PC version too, if they see demand for it. On 18.Oca.2009, at 21:00, Mikhail Novikov wrote: > I don't understan
2009-01-18 by Richard Scott
are Clavia even involved with modular synth manufacture at these days? I thought it was all over... Richard ----- Original Message ----- From: Mikhail Novikov To: Doepfer_a100@yahoogroups.com Sent: Sunday, January 18, 2009 8:00 PM Subject: Re: [Doepfer_a100] MOTU Volta I don't un
2009-01-18 by Argitoth
Two more questions, Florian. I need the shortest trigger possible. In the manual it says, the A-165 creates a 50ms trigger. Is that the shortest possible? And, can you tell me more about this spike that the A-111 VCO creates when it resets? Does this spike create a nice definitiv
2009-01-18 by Mikhail Novikov
I don't understand any usefullness of this, can't we just send parameters to modular through MIDI and MIDI-CV converter? There must be open-source programs for this. Why pay 150 euros for a mac-only (mac makes me sad panda) program? Korhan Erel wrote: > > This could change things
2009-01-18 by achtung_999
"I tell you if Clavia gets a mind to do this - GAME OVER!" hehehe, so true. On Sun, Jan 18, 2009 at 7:20 PM, James Husted wrote: > I tell you if Clavia gets a mind to do this - GAME OVER! Man could you > see the Nord G2 with CV outputs! They already do DSP and DSP to audio > and
2009-01-18 by Florian Anwander
Hi Giles > 1. The modules all seem to have a 60hz hum on output. It's low level, > but it's there. I haven't done much trouble shooting yet, Just tried a > different outlet. The fact that it's all modules that I tried, (2 > mixers and a filter), makes me thing there might be a po
2009-01-18 by Florian Anwander
Hello Argitoth > Ok, I finally understand a little bit how to restart my AS-VCOs. I > took the square output of the A-146 LFO and when the square is > positive, the AS-VCO stops. Then the square goes negative, the AS-VCO > restarts. Yes: as long as the sync-in has a voltage at th
2009-01-18 by Julian
>>You get LFOs and other CV sources with Volta that in would normally cost more than the price of a MOTU Ultralite MkIII sound interface. The more i read about the Volta, the less i understand the hype... I allready asked in the AH list, and noone really said anyhting. Say i have
2009-01-18 by James Husted
I tell you if Clavia gets a mind to do this - GAME OVER! Man could you see the Nord G2 with CV outputs! They already do DSP and DSP to audio and MIDI etc. That would be a killer system!. They could make it in hardware and just hook it up to an editor like the do now. -James On Ja
2009-01-18 by Argitoth
Ok, I finally understand a little bit how to restart my AS-VCOs. I took the square output of the A-146 LFO and when the square is positive, the AS-VCO stops. Then the square goes negative, the AS-VCO restarts. I then multiplied, inverted, and routed the A-146 to my envelopes. Her
2009-01-18 by Giles
Ahh...It seems so obvious now. I don't know how I missed that. Thanks, Giles --- In Doepfer_a100@yahoogroups.com, york luethje wrote: > > Hi Giles, > > no idea about the hum, but the gate would normally go into an envelope generator. > > Y > > > > > ______________________________
2009-01-18 by york luethje
Hi Giles, no idea about the hum, but the gate would normally go into an envelope generator. Y ________________________________ From: Giles To: Doepfer_a100@yahoogroups.com Sent: Sunday, January 18, 2009 10:16:04 AM Subject: [Doepfer_a100] two basic questions Hi, I just purchased
2009-01-18 by andreas
hi, alternatively, the a142 vcd or the a162 trigger delay with zero delay time should work, too. in both modules you can vary the gate length to short triggers... regards, andreas --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hi argitoth > > > If I plug a gate
2009-01-18 by Giles
Hi, I just purchased my first modules and a rack used and I'm trying to figure a couple of things out. I figured you guys could answer the questions pretty easily. 1. The modules all seem to have a 60hz hum on output. It's low level, but it's there. I haven't done much trouble sh
2009-01-18 by Guy Drieghe D.
That person was Matthew Davidson (Stretta), whom also designed several UI's for Motu (and others). It took him a while to convince Motu though... and they probably wouldn't have gone for it if most of their audio interfaces weren't DC-capable to start with. I'm not sure if Matthe
2009-01-18 by Guy Drieghe D.
If Matthew/Stretta can convince Motu that there is a market for an out/ in device, I'm sure Motu would develop it in a jiffy; they seem to be motivated enough and I reckon they have the necessary resources. If Motu wouldn't do it - and they're already halfway ahead of others, the
2009-01-18 by p. hendricks
On 1/17/09 3:07 PM, "James Husted" wrote: > You know with the buzz around the Volta, it won't be long before > someone else jumps in and does it. I will guess they will and most apps will add this to their seq/DAW in the next 5 years. Sad as it's so simple and MIDI should've been
2009-01-17 by Argitoth
Florian, so with a few more modules I could actually make my Analogue Systems VCO restart with a gate? I just need an A165 and A166? I don't understand completely what you're trying to help me understand.
2009-01-17 by David
What has happened here is probably one Motu employee has thought outside the square and actually managed to get this to market with the right pitch etc to management. its greater than the some of its parts and as profound as the internet was for computers. Analog Synthesizer tech