Yahoo Groups archive
Messages
Page 372 of 564 · 28179 messages matched
2005-12-31 by Michael O.
Hi! The module A-156 Dual quantizer, is used to make notes more "accurate", but can also be used to make scales. The lower section of the module has different switches so you can have it quantizing in different ways. Scales can be in minor or major, but I'm not good at describing
2005-12-31 by tkrakowiak
Hello Michael, looking at the pics, you're using a module i've never seen before. dual quantizer. i'm curious what is it , how does it work? cheers t p.s. by 2 cats you mean women ? :) On 31/12/05, Michael O. wrote: > Hi all! Have been a member of this group for a couple of month
2005-12-31 by Michael O.
Hi all! Have been a member of this group for a couple of months now, and it's nice to see there are many out there that share my interest in modular systems. I actually prefer my modulars than my regular synthesizers. Easier to create new sounds, and also makes your brain work a
2005-12-31 by selfoscillate
oh yes, and this sequencer is not an audio unit, but i think it can be used to control audio units. well, i'm still using logic 5.5.1 for pc, so maybe the newer logic/apple versions have other solutions. best wishes ingo --- In Doepfer_a100@yahoogroups.com, "selfoscillate" wrote:
2005-12-31 by selfoscillate
hello stuadh, if i recall right, then there was an analog sequencer environment for logic available at the emagic homepage. if it isn't online anymore, then i can send it to you per email. please contact me off-list for that. best wishes ingo --- In Doepfer_a100@yahoogroups.com,
2005-12-31 by selfoscillate
hello tomek, you will have to modify the stompbox to get vc of delay time, but it depends on the stompbox if this is possible. i can't tell much about that, i'm no electronics engineer, but i think that this is not an easy task. best wishes ingo --- In Doepfer_a100@yahoogroups.co
2005-12-31 by phil hendricks
Just a heads up, you may want to periodically check the battery in the A-112 for leakage/corrosion. As I was moving modules around today I noticed the battery on my a112 was all fuzzy, and should be replaced. My A-112 is probably around 7 years old. Maybe the Doepfer distributors
2005-12-31 by phil hendricks
On 12/30/05 5:38 PM, "stuadh" wrote: > hi, > > does anyone know of a soft version of an analogue sequencer? Numerology is very nice: http://www.five12.com/numerology.html Modularing was great, looks dead now? It was better left as only a seq. http://www.macmusic.org/softs/view.ph
2005-12-31 by Gene Schwartz
You'd have to use rewire, but there is really nothing like Numerology. -----Original Message----- From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of stuadh Sent: Friday, December 30, 2005 5:38 PM To: Doepfer_a100@yahoogroups.com Subject: [Doepfe
2005-12-31 by stuadh
hi, does anyone know of a soft version of an analogue sequencer? I'm especially interested in one that might work within Logic (Audio Unit). I'd likel to have a shot of using one without the expence of a module, to see I I like them. At the moment, I can't see anything that an A-
2005-12-30 by tkrakowiak
Thanks Ingo, this is slightly off topic: can cv be applied to modify existing digidelays( guitar stompbox is what i'm thinking)? cheers tomek On 30/12/05, selfoscillate wrote: > > hello tomek, > > yes, a clocked digital delay is planned, > but there is no confirmed release date y
2005-12-30 by Brandon Daniel
tkrakowiak said: > Thanks Ingo, that was my question > >> afaik reverse playback can only be achieved with a digital delay > > are there plans for such a device? would love to have a cv control on > a digital delay. The analogue systems rs290 is such a device... though I don't th
2005-12-30 by selfoscillate
hello tom, i agree, regular bbd-gear with their associated dull sound can be very appealing, even when used with long delay times. the issue with the a188/1 and long delays is that the biggest bbd-ic for the a188/1 has 2048 stages. bbd-ic's with more stages are out of production,
2005-12-30 by selfoscillate
hello tomek, yes, a clocked digital delay is planned, but there is no confirmed release date yet. yes, it will for sure have cv control. best wishes ingo --- In Doepfer_a100@yahoogroups.com, tkrakowiak wrote: > > Thanks Ingo, that was my question > > > afaik reverse playback can
2005-12-30 by thomasborax
tomek- a friend of mine here in baltimore (usa) named peter blasser designs VERY unconventional synthesizers. he is somewhere between a virtuoso synth designer and a circuit bender. his latest creation which he is selling from his website is a dual 8 bit voltage controlled digita
2005-12-30 by thomasborax
well, the dull squishy repeats of analog delays are their appeal for sure, imo. i wondered about delay capabilities simply because it seemed geared more towards the very short delay times. even if it doesn't do nice regular stompbox type analog delay, i will still get this becuas
2005-12-30 by tkrakowiak
Thanks Ingo, that was my question > afaik reverse playback can only be achieved with a digital delay are there plans for such a device? would love to have a cv control on a digital delay. best t
2005-12-30 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "Tommy DOG" wrote: > > --- In Doepfer_a100@yahoogroups.com, "selfoscillate" wrote: > > > i if you don't find any,> > > Thanks ingo, > > I decided to buy the module since i know I will use it. I appreciate your offer. > > TD you're welcome :-)
2005-12-30 by selfoscillate
hello tom, yes, if you want to get rid of the clock noise, you can simply patch a steep lowpass filter right after the bbd and so you get a standard analog delay. the problem is that the maximum delay time (and the possible maximum frequency range of the signal) depends both on t
2005-12-30 by selfoscillate
hello tomek, you can't change the scanning direction of a bbd, so the bbd cannot play backwards, it is just not built for such things. i guess that was your question? afaik reverse playback can only be achieved with a digital delay. best wishes ingo --- In Doepfer_a100@yahoogroup
2005-12-29 by Tommy DOG
--- In Doepfer_a100@yahoogroups.com, "selfoscillate" wrote: > i if you don't find any,> Thanks ingo, I decided to buy the module since i know I will use it. I appreciate your offer. TD
2005-12-29 by tkrakowiak
hello, it's a pleasing thing 188 sounds like metasonix's 'butt probe' (Big Black Dong :) can the stage snippet be reversed, or that requires some other module as well? thanks and happy 2006 t On 29/12/05, selfoscillate wrote: > > > hello all, > > here is another sound example tak
2005-12-29 by thomasborax
so, in your tests, would you say a reasonable analog delay is possible? or would there need to be additional chips in the delay line and filters to filter the clock out? i'm a lo-fi kind of guy, so the grease and noise of BBDs are not a deterrent but rather a plus. -t --- In Doep
2005-12-29 by selfoscillate
hello tom, basically the only difference is the possible minimum/maximum delay time. the bbd with 1024 stages offers shorter delays than the 2048 stages version. i cannot say much about the maximum delay time, because with long delay times you will hear the clock noise and i assu
2005-12-29 by selfoscillate
hello all, here is another sound example taken from the a188/1 prototype, this time equiped with a 2048 stages bbd ic. again the tr808 is used as sound source. the tr808 runs through an a119 and from there into the a188/1. the a119 envelope follower modulates the delay time. the
2005-12-28 by thomasborax
hello ingo and others- could you describe to me in more detail than is available on the doepfer webpage what the differences, advantages and disadvantages would be between the two different bbd ics? i prefer a longer delay time, as i would use a slapback and or reverb/delay effec
2005-12-28 by Tommy DOG
Thnakss ingo, there is noting on the home page. I am only curious about the sound of the digital noise as the 808 section is not interesting to me. I use the 117 often in patches and wanted to consider the 118 as an option. TD --- In Doepfer_a100@yahoogroups.com, "selfoscillate"
2005-12-28 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "Tommy DOG" wrote: > > Does anyone have any sound samples of this unit? > I am debating buying one. > > Thanks, > TD hello td, i don't have examples for the a118, but there should be a few on the doepfer homepage. if you don't find any, then i
2005-12-28 by selfoscillate
> Has Doepfer changed the color of the face plates a little or is just this run of units? hello, these are just tolerances of the different production batches. best wishes ingo
2005-12-27 by Tommy DOG
Does anyone have any sound samples of this unit? I am debating buying one. Thanks, TD
2005-12-27 by Tommy DOG
My wife bought me one of these for Hanukkah this year. It's great fun, I don't have the time to write a real review but it's the best module I've bought since the PLL. With so many great new modules coming I am going to have to buy yet anoth frame. Has Doepfer changed the color o
2005-12-26 by selfoscillate
hello all, first, a merry christmas to everybody :-) the a188/1 is a very exciting module, especially because it is not limited to standard flanger, chorus or reverb effects. i have prepared some examples, recorded directly from the output jack of the prototype (using a 1024 stag
2005-12-23 by Dieter Doepfer
The preliminary pages for the QVCO and the SCF are now online. And even the new price list valid from January 2006. For all orders we receive not later than December 31, 2005 still the old prices are valid (even if shipment/payment is in January 2006). Happy holidays Dieter Doepf
2005-12-23 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Should the forthcoming A101/9 Universal Vactrol Module be manufactured with polarizers for the cv inputs or with a combination of normal attenuators and "invert" switches? The version with p
2005-12-22 by Bakis Sirros
hello ingo, really agree! bakis. --- selfoscillate wrote: > --- In Doepfer_a100@yahoogroups.com, "Dieter > Doepfer" > wrote: > > > > > > > > > -----Ursprüngliche Nachricht----- > > > Von: Doepfer_a100@yahoogroups.com > > > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag > von gro
2005-12-22 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer" wrote: > > > > > -----Ursprüngliche Nachricht----- > > Von: Doepfer_a100@yahoogroups.com > > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von grove@z... > > The EG in the System 100 is less sluggish than the A100's A140 EG.
2005-12-22 by Dieter Doepfer
> -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von grove@zeta.org.au > The EG in the System 100 is less sluggish than the A100's A140 EG. > It doesn't click on short envelopes like the 140. The 140 does >
2005-12-21 by (i think you can figure that out)
Oft overlooked, mixers are one of the most commonly "You goot be kidding me, I'm out of..." modules in the modular rig Along with their more obvious function of mixing audio signals, they can also be used slyly for more interesting applications There's the hint: The circuitry of
2005-12-21 by Bakis Sirros
i, of course, agree about the a140 with the 12db slope(aka not self-oscillating)Ingo! bakis. --- ilanode wrote: > --- In Doepfer_a100@yahoogroups.com, grove@z... > wrote: > > > > > > The EG in the System 100 is less sluggish than the > A100's A140 EG. > > It doesn't click on shor
2005-12-21 by tkrakowiak
Thanks Bakis, and same to You. On 21/12/05, Bakis Sirros wrote: > > hello list, > it is now my turn to wish you all: > MERRY CHRISTMAS AND A VERY HAPPY NEW YEAR! > full of new electronic music and great modules! > and, of course, all the best for all the members! > best regards,
2005-12-21 by Zoran Bosnjak
Thank you Rachel, This was unbelievably useful answer - it beats discussions on AH about it. I also used to have System 100 - but only the keyboard monosynth, also known as 101. I sold it, and maybe I made the mistake. One person told me "you can make all these sounds on Jupiter
2005-12-21 by ilanode
--- In Doepfer_a100@yahoogroups.com, grove@z... wrote: > > > The EG in the System 100 is less sluggish than the A100's A140 EG. > It doesn't click on short envelopes like the 140. The 140 does > have more range, but doesn't feel as good as the Roland, which does > beautiful percu
2005-12-21 by grove@zeta.org.au
Hi Doepferites, I have both a complete System 100 and an A100 Mini System. For all intents and purposes, they are both quite different instruments. The Mini System shares only 1 VCF, LFO, EG and VCA for its 2 VCO's. Of course it's a modular and can be expanded to more power but l
2005-12-21 by Anton Coops
We will also offer an > option that allows to use the QVCO in combination with an already existing > A-126. would that reduce the 'bleed through' of the oscillator-sine? froehliche weinachten! Anton
2005-12-21 by Bakis Sirros
hello list, it is now my turn to wish you all: MERRY CHRISTMAS AND A VERY HAPPY NEW YEAR! full of new electronic music and great modules! and, of course, all the best for all the members! best regards, :-) bakis. Bakis Sirros - Parallel Worlds [Doepfer_a100] group owner http://ww
2005-12-21 by Bakis Sirros
many thanks for the info dieter. bakis. --- Dieter Doepfer wrote: > I have the preliminary front panels available and > will put them on our > website together with some explaining text during > the next few days. I have > to point out that it is not 100% sure that the > switched
2005-12-21 by Dieter Doepfer
I have the preliminary front panels available and will put them on our website together with some explaining text during the next few days. I have to point out that it is not 100% sure that the switched capacitor filter will be manufactured. The SCF seems a bit boring to me. From
2005-12-20 by Bakis Sirros
great news dieter. any webpages for the forthcoming thru-zero VCO and the switched-capacitor filter? best regards, bakis. --- Dieter Doepfer wrote: > For this I'd recommend another approach: Usage of > several voltage reference > sources (e.g. TL431) with adjustable output > volt
2005-12-20 by selfoscillate
hello bakis, afaik there is no webpage for the forthcoming stuff yet. i guess the pages will be updated in january. best wishes ingo --- In Doepfer_a100@yahoogroups.com, Bakis Sirros wrote: > > great news dieter. > any webpages for the forthcoming thru-zero VCO and the > switched
2005-12-20 by bellenger_a
Hello I saw this annoucement on the doepfer site about new design case and also a monster version. is there precise idea of the size of this case? especially this one with face-to-face closing? i have one A100 suitcase portable already and was thinking of getting another one... b