Yahoo Groups archive
Messages
Page 371 of 564 · 28179 messages matched
2006-01-08 by moogy
Hi Everyone, Firstly here is a list of modules in my new system, G6 case A-185 bus access A-102 diode filter A-118 noise source 3xA-140 ADSR 2xA-146 LFO A-160 clock divider A-161 clock sequencer 2x A-180 multiples A-138 mixer A-108 VCF A-179 LCV A-119 external in A-114 ring mod 2
2006-01-08 by phaedra@t-online.de
Hi Peter, I think it is not necessary to send a third one. The address you've used is quite correct until now and the package will reach me the next six months on my new address too, because I will give such an order to german postal service on friday 13th, if your package will n
2006-01-08 by (i think you can figure that out)
I prefer to not post too information on this issue on a good neighbor's yahoo group (this being a Doepfer site as opposed to the EAR blog), but I would like to take a second to discuss this. When I started out, Plan B consisted of me and my Aussie (dog). We expected no more than
2006-01-08 by (i think you can figure that out)
Hi Axel - We've discussed this all offline before, your specific issue with the Model 17 you ordered. The problem is not so much are unability to fulfil in your instance, it's the problem we've had with German customs. Many problems with the information they request to accept a p
2006-01-08 by phaedra@t-online.de
I'm not able to say something about the time, I'm waiting since four months for my module. I hope this will be the way to make it a little bit faster or, in my case, true! Axel "J S" schrieb: Does this mean that the time between placing an order and receiving the goods is going t
2006-01-08 by Eyesaw
Hi Miquel: Sorry, that module is sold. Thanks, Bill ----- Original Message ----- From: "pro2andrius" To: Sent: Sunday, January 08, 2006 5:08 AM Subject: [Doepfer_a100] Re: A 100 modules for sale Hi,friend I m interested in your ADSR module, i m from Spain. Here is my private mail
2006-01-08 by pro2andrius
Hi,friend I m interested in your ADSR module, i m from Spain. Here is my private mail ventral@ya.com thanks Miguel -- In Doepfer_a100@yahoogroups.com, jason kahn wrote: > > hello list > > i have the following A 100 modules for sale: > > A-147 VCLFO Voltage Controlled LFO // new p
2006-01-07 by jason kahn
hello list i have the following A 100 modules for sale: A-147 VCLFO Voltage Controlled LFO // new price: 80 euro // my price: 60 euro A-140 ADSR Envelope Generator // new price: 60 euro // my price: 45 euro A-125 VCP Voltage Controlled Phase Shifter // new price: 75 euro // my pr
2006-01-07 by stulama
Hi. Not sure what your budget or knowledge is of modular synths is but if you are starting from scratch here are a few ideas for the "Ultimate fat bass". You did say you had a "couple "of racks empty and ready! I would think you will need at least 2 VCO's . The A110 s are great b
2006-01-06 by ilanode
--- In Doepfer_a100@yahoogroups.com, "levka0" wrote: > It is all very personal, but IMO the A-105 and A-108 might be good > filters for bass sounds, besides the A-106. > The A-109 might also be quite good. > > Kind regards > Joost Can't comment on the others mentioned but the A10
2006-01-06 by J S
Does this mean that the time between placing an order and receiving the goods is going to be acceptable? 2006/1/6, Peter Grenader : > > D'oh! > > ...that's a Model 16 Spectral Multiplexer,, not model 15! > > > > > SPONSORED LINKS > A100 Modular > system > Synthesizer Electronic >
2006-01-06 by Peter Grenader
D'oh! ...that's a Model 16 Spectral Multiplexer,, not model 15!
2006-01-06 by Peter Grenader
Please excuse the x-postings. Ladies and Gents, Electro-Acoustic Research (EAR) is very excited to announce some big changes: Effective Jan 1, 2006 Analogue haven has become our U.S. dealer! Both U.S. and oversea's customers may now purchase EAR product directly from the AH site.
2006-01-06 by Zoran Bosnjak
The ultimate fat bass is vintage Fender Precision. OK, I am not funny. Regards, Zoran >From: "danfarmer19732003" >Reply-To: Doepfer_a100@yahoogroups.com >To: Doepfer_a100@yahoogroups.com >Subject: [Doepfer_a100] Re: The ultimate fat bass >Date: Fri, 06 Jan 2006 16:55:58 -0000 > >
2006-01-06 by levka0
Hi Dan, The A-113 is a very nice & versatile module but I think it would be a kind of 'overkill' to use it for basses only. I would choose an A-115 combined with an A-110 and A-111; It is all very personal, but IMO the A-105 and A-108 might be good filters for bass sounds, beside
2006-01-06 by tkrakowiak
Hello Dan, Would this be a midi driven or standalone bass drone? i own 106 and it can do some preety good bass on its own. try main freq @ 1-2, HP @ 0 or slightly to the left ('-' area) clip it downhill, and then add resonance but not too much (try 7-8 depending on your taste) no
2006-01-06 by danfarmer19732003
Hey thanks for responding... This would be a midi driven synth that I would be creating. > Hello Dan, > > Would this be a midi driven or standalone bass drone? i own 106 and it can > do some preety good bass on its own. try main freq @ 1-2, HP @ 0 or slightly > to the left ('-' a
2006-01-06 by danfarmer19732003
Hi everyone. I new to the doepfer system and have just purchased a few racks for doepfer modules. I currently only own one module at present. ( A-106 ) My mission to is create the ultimate, fat, sticky, thick and warm bass. Can anyone help me in choosing the right modules to get
2006-01-06 by David Salter
Very nice example Ingo, thanks. David Salter Senior Project Manager Reuters Ltd Tel +44 20 7542 2402 Mob +44 7990562402 email david.salter@reuters.com RM david.salter.reuters@reuters.net ________________________________ From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yaho
2006-01-06 by Bakis Sirros
hello ingo, once again, many thanks for your great and helpful audio clips! best regards, bakis. --- selfoscillate wrote: > > hello all, > > the following example shows the sonic differences of > filtered and unfiltered clock noise in a bbd module. > > this example is taken from
2006-01-06 by Bakis Sirros
hello, and finally the cd has been released and is available from cdbaby: http://cdbaby.com/cd/chrysalid this double cd has been made to help the victims of the hurricane katrina. all profits from the cd sales will go to the Red Cross and Habitat For Humanity. (Parallel Worlds pa
2006-01-06 by selfoscillate
hello all, the following example shows the sonic differences of filtered and unfiltered clock noise in a bbd module. this example is taken from the a188/1 prototype with 2048 stages ic. a small repeating sequence is running through the a188/1. you hear the pure bbd output without
2006-01-06 by selfoscillate
nope, but you can download the manuals for each module separately. best wishes ingo --- In Doepfer_a100@yahoogroups.com, "danfarmer19732003" wrote: > > Is there a free download for the full manual available? I checked the > doepfer website and didn't find anything. >
2006-01-06 by selfoscillate
hello, you just have to make sure that the red stripe of the power cable is connected to the -12 volt pin of the buss board. in doepfer cases the red stripe is orientated downwards, while in other cases it may be the other way around. best wishes ingo --- In Doepfer_a100@yahoogro
2006-01-06 by Robert Hoffman
Move the G3 sale to EBAY: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7380140930 Rob Hoffman ----------------------------- http://www.elicitmusic.com
2006-01-05 by Julian
Hi Dan, Glad to see you found the group. Theres no consolidated manual, but if you find the module overview page, and look at the individual modules, all with have either a pfd or html manual that you can read and / or print out. The have the same info as the bound manual, just i
2006-01-05 by danfarmer19732003
Is there a free download for the full manual available? I checked the doepfer website and didn't find anything.
2006-01-05 by danfarmer19732003
I bought a doepfer module recently and I was wondering if I could install that into a AS1600 case from analogue solutions. I heard that the doepfer modules power adapter must be fit upside down into the AS case board ( is this true? ), or is it that the doepfer modules fit upside
2006-01-05 by Eyesaw
Hi Rob: Thanks anyway, Bill ----- Original Message ----- From: "Robert Hoffman" To: Sent: Wednesday, January 04, 2006 7:18 PM Subject: [Doepfer_a100] FS: Doepfer A-100 G3 > So I'm scaling back a bit and selling a Doefper A-100G3, that's a 3 > space rack with a power supply. Excel
2006-01-05 by Robert Hoffman
So I'm scaling back a bit and selling a Doefper A-100G3, that's a 3 space rack with a power supply. Excellent condition, it had only one module in it and never left the studio. Asking $325 plus shipping. Will ship within the USA only, paypal preferred. Thanks Rob
2006-01-04 by selfoscillate
> Clock suppression for BBD devices: > > The A-188-1 will become a small additional redesign with an additional CV > output that reflects the sum of all CV inputs (i.e. manual control + CV1 > without attenuator + CV2 with attenuator). This can be used to control the > CV input of
2006-01-04 by Dieter Doepfer
Hello all, I'm in the company today as we have to take inventory during we are closed and found some messages from the group. Here are my comments to some of the messages: Erwik filter: Try to contact Jesper Erwik Johansson (jesper.johansson@mhm.lu.se) concerning the required cur
2006-01-03 by Michael O.
Hi, I bought my filter second hand for about 10-15 euros, not sure how much, it was a part of the bargain with the cabinet and the other modules. I actually met Morgan (synthesizer network) when the filter was new to the market, I was impressed, but it was a bit expensive. It was
2006-01-03 by selfoscillate
hello michael, phew, 10-15 euros is damn cheap, you're lucky :-) yes, afaik the erwik filter is a limited edition, only 12 were made. best wishes ingo --- In Doepfer_a100@yahoogroups.com, "Michael O." wrote: > > Hi, I bought my filter second hand for about 10-15 euros, not sure h
2006-01-03 by selfoscillate
hello david, same with me, the price was simply too high. i don't know if the price is still valid, but i don't see why the price should be much lower now. best wishes ingo --- In Doepfer_a100@yahoogroups.com, David Salter wrote: > > 500 euros is too much for me. I like mixing mo
2006-01-03 by Florian Anwander
Hi Tomek >>A CV-input might be quite difficult, but ist should be easy to add an >>clock input which should be fed by a highspeed VCO. > thanks for the answer, could you mail me with more info on that (priv or > group). i'm not sure how to implement a clock into the signal chain.
2006-01-03 by David Salter
500 euros is too much for me. I like mixing modules from other makers but as I already have a 107 I'll pass. Thanks for the info David Salter Senior Project Manager Reuters Ltd Tel +44 20 7542 2402 Mob +44 7990562402 email david.salter@reuters.com RM david.salter.reuters@reuters.
2006-01-03 by tkrakowiak
Florian, thanks for the answer, could you mail me with more info on that (priv or group). i'm not sure how to implement a clock into the signal chain. thanks again cheers tomek On 02/01/06, Florian Anwander wrote: > > Hi Tomek > > > this is slightly off topic: can cv be applied t
2006-01-03 by selfoscillate
right, thats where i've seen it too. i asked for the price of that module quite a while ago, before the a107 was released. they wanted nearly 500 euros for it, very expensive, especially when looking at the a107 which still costs less than 300 euros, even after the latest price i
2006-01-03 by selfoscillate
hello daniel, many thanks for that info. looks a lot like the a107. best wishes ingo --- In Doepfer_a100@yahoogroups.com, "sci700" wrote: > > just checked, resonance selfoscillates at these filter modes: > > 1. no (1 pole Low) > 2. yes (2 pole Low) > 3. no (3 pole Low) > 4. yes (
2006-01-03 by David Salter
Out of curiosity, is this filter still available, and if so where from? Thanks David David Salter Senior Project Manager Reuters Ltd Tel +44 20 7542 2402 Mob +44 7990562402 email david.salter@reuters.com RM david.salter.reuters@reuters.net ________________________________ From: D
2006-01-03 by sci700
I'm not sure if they just haven't updated the site in a long time but they seem to have one left here: http://www.analogue.org/network/frames24.htm (it's the swedish doepfer dealer) best /d --- In Doepfer_a100@yahoogroups.com, David Salter wrote: > > Out of curiosity, is this fil
2006-01-03 by sci700
just checked, resonance selfoscillates at these filter modes: 1. no (1 pole Low) 2. yes (2 pole Low) 3. no (3 pole Low) 4. yes (4 pole Low) 5. no (1 pole High) 6. no (2 pole High) 7. no (3 pole High) 8. yes (2 pole Band) 9. yes (4 pole Band) A. no (2 pole Notch) B. no (3 pole Pha
2006-01-03 by selfoscillate
hello daniel, the a107 uses a cem 3379. just a short question, does the erwik start oscillating at full resonance in all filter modes? i'm especially interested in the highpass modes. thanks :-) best wishes ingo --- In Doepfer_a100@yahoogroups.com, "sci700" wrote: > > Hi Ingo, >
2006-01-03 by sci700
Hi Ingo, i have the Erwik filter too. I think it sounds really beatiful, I use it a lot. But at a slightly lower price the A-107 can do the same and more, so... The Erwik uses the CEM3372, is that what's in the A-107 too? best /Daniel --- In Doepfer_a100@yahoogroups.com, "selfosc
2006-01-02 by Michael O.
Thanks! The erwik filter is quite good, I like setting "2" the most. It's quite good, even though I haven't used it that much yet. I bought it for about 3-4 months ago together with the big cabinet and about 10 other modules. Luckily I could cram the cabinet full with no gaps.. :
2006-01-02 by selfoscillate
hello michael, nice to have you on board :-) do you like the erwik filter? it caught my attention a few years ago, but i refused to buy it because of the high price tag. now that the a107 is available, this seems to be valid even more. what is your opinion, does the erwik offer s
2006-01-02 by Florian Anwander
Hi Tomek > this is slightly off topic: can cv be applied to modify existing digidelays( > guitar stompbox is what i'm thinking)? A CV-input might be quite difficult, but ist should be easy to add an clock input which should be fed by a highspeed VCO. The highspeed VCO could be re
2006-01-01 by Julian
No, but i do have some modules (and some other rare and interesting trinkets : ) up for grabs See my page at: http://www.numberofthebeast.org/forsale2.html Some of these are re-lists from the sale at the beginning of november, due to a few people defaulting on their reservations.
2006-01-01 by dingfutzer
Hi Folks - Does anyone have a G6 and/or G3 rack frame available for sale? Also looking for an Encore Expressionist or MCV24. Thanks, Bill