Yahoo Groups archive
Messages
Page 41 of 564 · 28179 messages matched
2015-03-04 by achtung_999
Dig into this topic at Muffwiggler, it will most likely answer all your questions: https://www.muffwiggler.com/forum/viewtopic.php?t=73618&start=all&postdays=0&postorder=asc Ernst On Thu, Mar 5, 2015 at 12:10 AM, achtung_999 heinrich.himmelwasser@gmail.com > wrote: You mean the A
2015-03-04 by achtung_999
You mean the A171-2 I presume? Ernst On Wed, Mar 4, 2015 at 11:56 PM, yahoo ctujoao@yahoo.co.uk [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Hello, I’ve tested a make noise math and any waveform above 200/300Hz get transformed to something more “triangular” even with both
2015-03-04 by yahoo
Hello, I’ve tested a make noise math and any waveform above 200/300Hz get transformed to something more “triangular” even with both slew parameters set to 0 (very obvious with a sine). I’ve got a A-170 and it’s definitely not the case: what goes in, come out unmodified if the sle
2015-02-26 by yahoo@doepfer.de
> Hi everyone! Good to be here. I'm a big admirer of Doepfer and the Eurorack system, having started with a Dark Energy > about this time last year and now moving into my third rack, a LCB to sit under two LC9s full of modules (gulp!). > > > I hava an A-154 and A-155 and I am won
2015-02-25 by Neil Kagan
Mine behaves exactly the same way so I’m guessing it’s not a fault. I’ve learned to live with it though! Neil > On 25 Feb 2015, at 19:37, kazys varnelis kvarnelis@gmail.com [Doepfer_a100] wrote: > > > Hi everyone! Good to be here. I'm a big admirer of Doepfer and the Eurorack sys
2015-02-25 by kazys varnelis
Hi everyone! Good to be here. I'm a big admirer of Doepfer and the Eurorack system, having started with a Dark Energy about this time last year and now moving into my third rack, a LCB to sit under two LC9s full of modules (gulp!). I hava an A-154 and A-155 and I am wondering abo
2015-02-25 by james.husted@mac.com
LOL - That shows you how old my Doepfer system is! I think almost all of my modules are Cliff jack older ones. Glad to hear it. I’s still amazed more other companies are not using the CV/GATE busses. -James James Husted, Designer, Synthwerks LLC • www.synthwerks.com • james@synth
2015-02-25 by yahoo@doepfer.de
> I am amazed the CV and Gate busses have not been adopted by more Eurorack makers. Almost ALL of the CV and Gate producing > modules that we make have jumpers inside to select its use or not. The ones that don’t are because of size constraints > (the 16-pin header is hard to fit
2015-02-24 by james.husted@mac.com
I am amazed the CV and Gate busses have not been adopted by more Eurorack makers. Almost ALL of the CV and Gate producing modules that we make have jumpers inside to select its use or not. The ones that don’t are because of size constraints (the 16-pin header is hard to fit on a
2015-02-24 by Neil Kagan
That would be excellent Dieter, Danke schon :) Sent from my iPhone On 24 Feb 2015, at 09:48, yahoo@doepfer.de [Doepfer_a100] wrote: >> Any chance it could be added before the 110-4 is released? > > I'll see if it's possible as the A-110-4 production should start end of February.
2015-02-24 by yahoo@doepfer.de
> Any chance it could be added before the 110-4 is released? I'll see if it's possible as the A-110-4 production should start end of February. Best wishes Dieter Doepfer
2015-02-23 by Neil Kagan
Any chance it could be added before the 110-4 is released? Sent from my iPhone On 23 Feb 2015, at 10:46, yahoo@doepfer.de [Doepfer_a100] wrote: >> Hello to you all (Dieter in particular!) >> >> Does anyone know if the upcoming A-110-4 will read from the CV bus? Also, I’m looking
2015-02-23 by yahoo@doepfer.de
> Hi - I'm wondering what the options are very VERY slow (several minutes hopefully) are for VCLFOs that produce sine > waves. At the moment I'm using the Triangle waves from A 143-4s but sometimes sines would be more pleasing. It is about > creating slow changing drones. I'm usi
2015-02-23 by yahoo@doepfer.de
> Hello to you all (Dieter in particular!) > > Does anyone know if the upcoming A-110-4 will read from the CV bus? Also, I’m looking to get an A-112 and wanted to know > if that can read from the bus as well. > > Neil Sorry - neither A-112 nor A-110-4 read CV from the bus. But yo
2015-02-22 by karelvanbezooijen@yahoo.com
When I look at the pcb they both are equipped with a 2 * 8 connector so reading from the bus is most likely but of course I may be wrong. Karel.
2015-02-21 by Jase
She even Sent from my iPhone > On 21 Feb 2015, at 15:22, sachavaughan@yahoo.com [Doepfer_a100] wrote: > > Hi, was just wondering if i can create snare and clave hits with the modules i have in the A100 bs2? > > > > I've tried copying patches from Modular-Planet but failed(i defin
2015-02-21 by sachavaughan@yahoo.com
Hi, was just wondering if i can create snare and clave hits with the modules i have in the A100 bs2? I've tried copying patches from Modular-Planet but failed(i definitely know it could be me) They/he uses a a A121 vcf module would this make much of a difference to the required o
2015-02-21 by David Kellett
Hi - I'm wondering what the options are very VERY slow (several minutes hopefully) are for VCLFOs that produce sine waves. At the moment I'm using the Triangle waves from A 143-4s but sometimes sines would be more pleasing. It is about creating slow changing drones. I'm using a s
2015-02-20 by Neil Kagan
Hello to you all (Dieter in particular!) Does anyone know if the upcoming A-110-4 will read from the CV bus? Also, I’m looking to get an A-112 and wanted to know if that can read from the bus as well. Neil
2015-02-18 by Nicholas Keller
http://www.doepfer.de/DIY/a100_capacitors.htm You can change the timing capacitors of some modules to get faster or slower rates
2015-02-18 by Zoë Blade
> assume I have to remove the 3.5mm > jack screws on the top of the casing? What's the proper tool to do so? The hex nuts? Nina made a tool just for that if anyone's interested: https://twitter.com/nr2097/status/565815987178831872 You can 3D print that to get a handy little devic
2015-02-18 by Florian Anwander
Am 18.02.2015 um 09:50 schrieb yahoo@doepfer.de [Doepfer_a100]: >> assume I have to remove the 3.5mm >> jack screws on the top of the casing? What's the proper tool to do so? >> > You need a suitable socket wrench (about 11 mm). Even pliers may be used but this increases the risk
2015-02-18 by yahoo@doepfer.de
> Thanks Mr. Doepfer! > > > Since I will have to remove the Supply/Interface Board to reach the DE's CEM3394, I assume I have to remove the 3.5mm > jack screws on the top of the casing? What's the proper tool to do so? > > > thanks so much and kind regards > Frank You need a suit
2015-02-17 by manhaterde@yahoo.de
Thanks Mr. Doepfer! Since I will have to remove the Supply/Interface Board to reach the DE's CEM3394, I assume I have to remove the 3.5mm jack screws on the top of the casing? What's the proper tool to do so? thanks so much and kind regards Frank
2015-02-16 by Martin Fay
Hi Jase, There is a meet in Huddersfield before the end of this month, details are in the Events forum of the MuffWiggler.com forums. Martin Sent from my iPhone On 16 Feb 2015, at 16:23, "sachavaughan@yahoo.com [Doepfer_a100]" wrote: > Anyone on here from Middlesbrough uk or the
2015-02-16 by sachavaughan@yahoo.com
Anyone on here from Middlesbrough uk or the surrounding area that want to meet up, or knows if theres any local modular groups near by for advice?? Cheers Jase
2015-02-16 by yahoo@doepfer.de
> I'm building a switch for the A127 BOM so I can easily choose one of the four filter types. But before actually > connecting I want to make sure I'm right about the pin out. > > Please see: http://www.pulsepsycle.nl/wp-content/uploads/BOMCapture.jpg > > > Obviously maybe but I
2015-02-16 by yahoo@doepfer.de
> Today I noticed a strange behavior in my Dark Energy I. I noticed a constant modulation of the cutoff frequency. It > sounds like the cutoff is being modulated by an audio-rate square wave. Of course I ruled out any bleed by whatever > internal CV sources are available. The mod
2015-02-15 by manhaterde@yahoo.de
Today I noticed a strange behavior in my Dark Energy I. I noticed a constant modulation of the cutoff frequency. It sounds like the cutoff is being modulated by an audio-rate square wave. Of course I ruled out any bleed by whatever internal CV sources are available. The modulatio
2015-02-14 by syndromeda@telenet.be
Ok than....€180.....
2015-02-14 by karelvanbezooijen@yahoo.com
I'm building a switch for the A127 BOM so I can easily choose one of the four filter types. But before actually connecting I want to make sure I'm right about the pin out. Please see: http://www.pulsepsycle.nl/wp-content/uploads/BOMCapture.jpg Obviously maybe but I assume B is co
2015-02-13 by Neil Kagan
I know that Dieter has mentioned an update to the A-126, but I'm not holding my breath as I've seen it reported a number of times and they clearly have new modules that are a higher priority. Are there any users on here wanting to sell one? I'm in London, UK. Neil Sent from my iP
2015-02-13 by Neil Kagan
Yes the a-111. I'm not a modifier so will just leave it! Sent from my iPhone > On 13 Feb 2015, at 10:22, Florian Anwander fanwander@mnet-online.de [Doepfer_a100] wrote: > > With which VCO did you try it? The A-111 may have AC coupling at the > lin-CV input. I don't remember the A
2015-02-13 by Florian Anwander
With which VCO did you try it? The A-111 may have AC coupling at the lin-CV input. I don't remember the A-111 schematics now, but you may have to bridge the coupling capacitor. Dieter may jump in and direct you to the required change. Am 13.02.2015 um 11:07 schrieb Neil Kagan bli
2015-02-13 by Neil Kagan
:) We have the same! Sent from my iPhone > On 13 Feb 2015, at 10:08, Florian Anwander fanwander@mnet-online.de [Doepfer_a100] wrote: > > Hello Neil > > Am 13.02.2015 um 10:45 schrieb Neil Kagan blinkenlicht@yahoo.com > [Doepfer_a100]: > > Now why didn’t I think of that????! > In
2015-02-13 by Florian Anwander
Hello Neil Am 13.02.2015 um 10:45 schrieb Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100]: > Now why didn’t I think of that????! In German we have the saying: "I didn't see the forrest because of all the trees" ;-) Florian
2015-02-13 by Neil Kagan
Ok that didn’t work. Barely a change in pitch at all, even with amplification :( > On 13 Feb 2015, at 09:41, Florian Anwander fanwander@mnet-online.de [Doepfer_a100] wrote: > > Hello Neil, > > The most "easy" way might be to use the linear cv inputs at the VCOs. > Directly availa
2015-02-13 by Neil Kagan
Now why didn’t I think of that????! > On 13 Feb 2015, at 09:41, Florian Anwander fanwander@mnet-online.de [Doepfer_a100] wrote: > > Hello Neil, > > The most "easy" way might be to use the linear cv inputs at the VCOs. > Directly available at the A-111 or the forthcoming A-110-2.
2015-02-13 by Florian Anwander
Hello Neil, The most "easy" way might be to use the linear cv inputs at the VCOs. Directly available at the A-111 or the forthcoming A-110-2. For the A-110(-1) you have to modify the module (see http://www.doepfer.de/a110_tec.htm). Florian Am 13.02.2015 um 09:47 schrieb Neil Kaga
2015-02-13 by Neil Kagan
I have a quick question. Using Doepfer modules, is there a way to get the MS-20 mini’s (Hz / Volt) output to scale correctly in order to control Doepfer oscillators? I had a Harvestman English Tear but it was a nightmare to set up properly. In my head this should be possible as i
2015-02-12 by Malte Stamm-Gadow
Hallo, Ich wäre an dem A-150 interessiert. Viele Grüße, Malte Stamm-Gadow Journalist Musik- & Theaterwissenschaftler Lindenweg 17 24159 Kiel Tel. 0172 30 797 00 > Am 12.02.2015 um 19:27 schrieb Pieter Volger volger@lebenspuls.de [Doepfer_a100] : > > > I am selling: > > Doepfer A-
2015-02-12 by Pieter Volger
I am selling: Doepfer A-155 Analog/Trigger Sequencer 195,- Euro Doepfer A-132-3 DVCA, dual lin./exp. VCA 75,- Euro Doepfer A-150 Dual VCs-Switch 35,- Euro Doepfer A-185-1 Bus Access 35,- Euro Doepfer A-180 Multiple 20,- Euro Abstract Data Reactive Shaper ADE-10 130,- Euro all mod
2015-02-12 by Neil Kagan
Oh nice work thanks :) Sent from my iPhone > On 12 Feb 2015, at 14:12, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] wrote: > > Oh and, Neil, some more detail, last post was a bit fast: > > just did a quick test. > This is the result from slow to fast: > > A147 is sl
2015-02-12 by achtung_999
Oh and, Neil, some more detail, last post was a bit fast: just did a quick test. This is the result from slow to fast: A147 is slowest but can be voltage controlled! (i own 3, love it) A146 A145 A143-9 is faster than the a145 when inputting some CV on top of the highest knob sett
2015-02-12 by Neil Kagan
I have the other three, including the A-143-9 and yes it's great! Shame the other two cant get up to the same rate as the PW function is so useful. Neil Sent from my iPhone > On 12 Feb 2015, at 13:59, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] wrote: > > I can ans
2015-02-12 by achtung_999
I can answer about the LFOs I have in my system: A145 is the fastest yes. The 146 and 147 are much slower. The A143-9 is also very fast. And with a small modification it's a nice sine VCO that can be used for linear FM. I can highly recommend the A143-9 ! On Thu, Feb 12, 2015 at
2015-02-12 by Neil Kagan
Ok, can someone tell me which Doepfer LFO has the fastest available rate? It seems the A-145 does, having read the manuals. Neil Sent from my iPhone
2015-02-12 by syndromeda@telenet.be
Selling mine in perfect condition (need to make place) for €200 including shipment in the EU....or make me an offer I can't refuse... Cheers, Danny - Syndromeda
2015-02-11 by Neil Kagan
Good plan! Sent from my iPhone > On 11 Feb 2015, at 19:14, Marlene Gutsch marlene.gutsch@yahoo.de [Doepfer_a100] wrote: > > very cool. > before i wanted to mount the 155+154 with corresponding modules in the front, and then, when the a-157 is available , i planned to put the 157
2015-02-11 by Marlene Gutsch
very cool. before i wanted to mount the 155+154 with corresponding modules in the front, and then, when the a-157 is available , i planned to put the 157 in the angle.now i am doing it vice versa , thats for shure.ciao + thanksroland Von: "Neil Kagan blinkenlicht@yahoo.com [Doepf