Yahoo Groups archive
Messages
Page 45 of 564 · 28179 messages matched
2014-12-12 by achtung_999
Sounds good David! As you might have seen, Dieter took good care of me here :D On Fri, Dec 12, 2014 at 6:14 PM, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: My mic is an AKG cardioid- the number of which escapes me at the moment.
2014-12-12 by David Kellett
Good news Ernst!! It seems Santa thinks you've been very good!! David www.movingisliving.co.uk Sent from my iPhone > On 12 Dec 2014, at 14:23, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] wrote: > > Thanks Dieter! > Mail has been send! > >> On Fri, Dec 12, 2014 at 3
2014-12-12 by David Kellett
My mic is an AKG cardioid- the number of which escapes me at the moment. But I'm thinking of getting a contact mic to attach to the central heating radiator to get some interesting environmental sounds :-) David www.movingisliving.co.uk Sent from my iPhone > On 12 Dec 2014, at 13
2014-12-12 by David Kellett
Yes me too - I'm interested in the way I can encode environmental soundscapes onto pitched drones. David www.movingisliving.co.uk Sent from my iPhone > On 12 Dec 2014, at 13:45, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] wrote: > > And for me it is not about doing
2014-12-12 by David Kellett
Sorry Ernst! I have only the 3rd 5way slew to pay for next week and then I shall have the complete system. David www.movingisliving.co.uk Sent from my iPhone > On 12 Dec 2014, at 13:44, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] wrote: > > So it was you... that wa
2014-12-12 by achtung_999
Thanks Dieter! Mail has been send! On Fri, Dec 12, 2014 at 3:13 PM, yahoo@doepfer.de [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: > For years I have been thinking about getting the vocoder heart of the system... > Recently I checked it out again and noticed to my horror t
2014-12-12 by yahoo@doepfer.de
> For years I have been thinking about getting the vocoder heart of the system... > Recently I checked it out again and noticed to my horror that it's not being made anymore... > Is there going to a follow up to this module(s)? Or am I damned to get it 2nd hand? > I'm quite bumme
2014-12-12 by achtung_999
The other vocoders are no alternative for me since they are not as flexible as the A129-1/2. I repeat it again, I am not interest in using it with voice. And it's all about the voltage control and the swapping of bands and all those creative things you can actually do with a voco
2014-12-12 by Scott Rogers
JUST as an option, I use the electroharmonix V256. No voltage control (I haven't looked at the module so I don't know what it can do) but it sounds fantastic as long as you have a good mic (don't use a 57 or 58, get something like an AT2020). WAY better than microkorg, Korg M3 (b
2014-12-12 by achtung_999
And for me it is not about doing the voice vocoding... there are so much more possiblities.. Alas.. alas... On Fri, Dec 12, 2014 at 2:44 PM, achtung_999 heinrich.himmelwasser@gmail.com > wrote: So it was you... that was the last one... It went offline at Thomann a few weeks back.
2014-12-12 by achtung_999
So it was you... that was the last one... It went offline at Thomann a few weeks back. I should have been faster. Ernst On Fri, Dec 12, 2014 at 1:56 PM, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Ernst - I bought one a couple of
2014-12-12 by David Kellett
Ernst - I bought one a couple of weeks ago from Thomann after I got the other bits on eBay. When I bought mine I think they had 2 more left......... I set them up on Wednesday night - mic into Fireface and then out via light pipe to ES3 and then back through ES6 with the Vocoder
2014-12-12 by achtung_999
For years I have been thinking about getting the vocoder heart of the system... Recently I checked it out again and noticed to my horror that it's not being made anymore... Is there going to a follow up to this module(s)? Or am I damned to get it 2nd hand? I'm quite bummed out ab
2014-12-11 by sj230962@gmail.com
Please message me for pics and prices if interested. All located in UK. Thanks Steve
2014-12-10 by a11@live.nl
Thank you for the quick reply, Dieter. Yes, I want to try the repair myself, for I have some experience in electronics and soldering. I'll follow your advice-steps, but if those do not solve the prob, I would rather buy another A-108. So I'll let you know. Oh yes, the thing about
2014-12-09 by Neil Kagan
Hi there, Anyone looking to sell the following modules? A-152, A-140, A-142, A-165, A-196 Neil Sent from my iPhone
2014-12-09 by yahoo@doepfer.de
It's impossible to estimate from the distance what's wrong. I'd recommend to send in the module for repair if you have no experience in electronics and soldering. If you want to try the repair yourself: First of all I'd recommend to replace all integrated circuits. In most cases
2014-12-09 by a11@live.nl
Correction 2: Q1 and Q2 measurements where taken offline (module out of system).
2014-12-09 by a11@live.nl
Correction:Technically I am Not so far with electronics
2014-12-09 by a11@live.nl
Dear members, Technically I am so far with electronics, so I thought maybe you can help with this strange problem with my favorite filter A-108. I don't hear any any sound from the outputs, while the input is connected to the Saw of A-111; no click, no tick, no noise, just 100% s
2014-12-06 by Tom Pearson
You might like this as well. It is a diy project and will be available as a kit or just pcbs, but you can probably find someone to build it for you if needed. On 6 December 2014 at 19:50, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrot
2014-12-06 by Sean Dynan
Here's a great demo of the RF Nomad module: http://youtu.be/JVFyDpszyoA On 6 December 2014 at 19:50, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: I never thought to look for an actual Eurorack module - but Everton Technologies RF
2014-12-06 by David Kellett
I never thought to look for an actual Eurorack module - but Everton Technologies RF Nomad!! I just found it. Looks good!! It is out of stock at Schneiders but I shall def investigate it more. Thanks Jonathan. David www.movingisliving.co.uk Sent from my iPhone > On 6 Dec 2014, at
2014-12-06 by Jonathan
I can't just remember who but someone actually makes (or made) a Eurorack Doepfer standard module short wave radio! I am sure someone on the forum will be able to remind us who... Jonathan Shapero From my iPad Air > On 6 Dec 2014, at 19:19, David Kellett davidkellettwoulf@yahoo.c
2014-12-06 by David Kellett
Hi, I'm looking into getting a shortwave radio to feed into the Analysis side of an A129 system. The idea being to create interesting unpredictable soundscapes. So I was wondering - has anyone else experimented with Shortwave radios in this context? Any suggestions for picking a
2014-12-04 by achtung_999
Cool! Would love to hear some of the results. Since this is the kind of stuff I am very much into also! Ernst On Thu, Dec 4, 2014 at 8:44 PM, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Hi All, Incase anyone is wondering - I emai
2014-12-04 by David Kellett
Hi All, Incase anyone is wondering - I emailed Intelijel today and Danjel there says that the Rubicons will be fine for this experiment. So I will try it out next week. Thanks Ernst for suggesting that I ask Intelijel direct. I will let the group know what results I get, David ww
2014-12-03 by achtung_999
You could try and contact Intellijel. For what I have understood they are very approachable. Ernst On Wed, Dec 3, 2014 at 9:54 PM, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: It's the damaging thing I don't want to do! My A110s w
2014-12-03 by David Kellett
It's the damaging thing I don't want to do! My A110s won't go high enough to do what I want and I don't know enough about my Rubicons to know if they are protected like the Doepfer Modules. David www.movingisliving.co.uk Sent from my iPhone > On 3 Dec 2014, at 20:50, andy butler
2014-12-03 by andy butler
>It sounds like I won't do it then!! Thanks Dieter!! ...but that's what you wanted, some kind of non-linear interaction and no damage to the modules. :-) andy > But the output circuits may also interact and you obtain a result that depends upon the output circuits (e.g. kind of >
2014-12-03 by Robert Manzitti
I just joined this group.....I am selling some of my gear and thought maybe someone in this group would be interested. I am selling two LMK4+, two D3M keyboards and one D3C drawbar controller. The D3Ms and D3C are in mint condition and have never left my studio. The LMK4+s have b
2014-12-03 by David Kellett
It sounds like I won't do it then!! Thanks Dieter!! It seemed straight forward in Allen Strange's book - he even describes how to make the Passive Mult!! And there are diagrams of resultant waveforms too. David www.movingisliving.co.uk Sent from my iPhone > On 3 Dec 2014, at 08:5
2014-12-03 by yahoo@doepfer.de
> Hi, > > A question about passive mults. I want to put the signals from two oscillators (prob Rubicons) at very high frequencies > together to have the beat frequency in the audio range. Difference tones or I've sometimes heard it called Heterodyning. > I have read about doing i
2014-12-02 by andy butler
A passive Mult wouldn't guarantee the effect you want. What you need is some type of waveshaping (i.e. a nonlinearity) *after* the addition. It's possible that an active mult could achieve this, but only if you overloaded it with the osc signals. I don't know though, I'm only a D
2014-12-02 by achtung_999
I will look this up. I have a copy of that book somewhere too! Ernst On Tue, Dec 2, 2014 at 6:57 PM, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: My understanding of mixers like the A 138 is that they are designed to NOT produce t
2014-12-02 by David Kellett
My understanding of mixers like the A 138 is that they are designed to NOT produce the effect that I want - they are designed to minimise the artefacts of bringing the signals together. I'm specifically looking to create interaction effects. As I said in the initial email about u
2014-12-01 by sj230962@gmail.com
I'm upgrading to 3xP9s, so I have a spare G6 rack for sale. Asking GBP250 or best offer. Pls message me if interested. Thanks Steve
2014-12-01 by sj230962@gmail.com
Thanks Dieter.
2014-12-01 by yahoo@doepfer.de
> Got my A132-4 last week and just wanted to check something with you knowledgeable folks. > > > I ws feeding output from A140 ADSR into CV,1 audio in from filter, out to external mixer. The output was *really* hot > (loud). I had to route the signal via the attenuator module to
2014-12-01 by achtung_999
Then again, a normal mixer that does not amplify (for instance the doepfer a138a/b) is also a unity gain mixer if you turn all the channels you are using to the maximum setting. On Sun, Nov 30, 2014 at 10:22 PM, james.husted@mac.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > w
2014-11-30 by james.husted@mac.com
The module you want is a unity gain mixer/summer - it is like a mixer without the level controls. Intellijel designs makes one called the Unity Mixer for US$75 (on Analogue Haven - http://www.analoguehaven.com/intellijeldesigns/unitymixer/ ). It is a dual 3-in 1 out summer that i
2014-11-30 by florian anwander
Hello David > So would buffered mults work in the same way but with no risk? No buffered mults wouldn't work at all. They are the opposite of a mixer (think them as 7 aux sends of a mixer, with send volume turned fully up). A mixer is a mixer. Thats it. A multiple in your planned
2014-11-30 by David Kellett
So would buffered mults work in the same way but with no risk? David www.movingisliving.co.uk Sent from my iPhone > On 30 Nov 2014, at 18:36, 'istari' istari@sozialistischer-plattenbau.org [Doepfer_a100] wrote: > > Hi > > Useally its good practice to use passive mults not as a mi
2014-11-30 by istari
Hi Useally its good practice to use passive mults not as a mixer, there is a danger that the current flows back from one module out to the othe module out if they are not protected. but some people just use passive mults as mixer, i am not cheers felix Hi, A question about passiv
2014-11-30 by sj230962@gmail.com
Got my A132-4 last week and just wanted to check something with you knowledgeable folks. I ws feeding output from A140 ADSR into CV,1 audio in from filter, out to external mixer. The output was *really* hot (loud). I had to route the signal via the attenuator module to keep it wo
2014-11-29 by David Kellett
Hi, A question about passive mults. I want to put the signals from two oscillators (prob Rubicons) at very high frequencies together to have the beat frequency in the audio range. Difference tones or I've sometimes heard it called Heterodyning. I have read about doing it with a m
2014-11-29 by achtung_999
Yeah sorry man, I had not read your problem very carefully... Excuse me for the patch walkthrough... you're obviously on top of things! On Fri, Nov 28, 2014 at 4:07 PM, Steve Jenkins sj230962@gmail.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Thanks Heinrich - I have
2014-11-28 by Steve Jenkins
Thanks Heinrich - I have read the A154 manual and understand the switching between the modules. The thing I couldn’t quite get my head around is how the sequence could progress to step 8, thereby triggering the high voltage to get the A150 to switch routing to A155#2 if the first
2014-11-28 by Steve Jenkins
As ever -any thanks Dieter for your logical and concise explanation. And your endless patience :-) Have a great weekend. Steve Out of office - sent from mobile device On 28 Nov 2014, at 22:07, yahoo@doepfer.de [Doepfer_a100] wrote: >> Thanks Diieter - but I’m still a little confu
2014-11-28 by yahoo@doepfer.de
> Thanks Diieter - but I’m still a little confused. > > If the 2xA155s are running in parallel and I select first at step 2 and last at step 5 (on the dials - but what I really > want to select are step 2 and step13 of a 16 step sequence), then when the first A155 cycles through,