Yahoo Groups archive
Messages
Page 47 of 564 · 28179 messages matched
2014-11-18 by florian anwander
Hello David Am 18.11.2014 08:38, schrieb David Kellett davidkellettwoulf@yahoo.com > 1) To create a CV based > (proportional to) on the rate of change of another CV > 2) To create a gate when there is a step in a CV. You've got several examples to solve the part #2 of your reques
2014-11-18 by David Kellett
Thanks for that info Dieter. Unfortunately my electronics skills are no existent!! I would have to get someone else to build it for me :-) David www.movingisliving.co.uk Sent from my iPhone > On 18 Nov 2014, at 09:05, yahoo@doepfer.de [Doepfer_a100] wrote: > > > -----Ursprunglich
2014-11-18 by David Kellett
Yes the Elby would work. Thanks for pointing me at it. That would solve the Gate part. David www.movingisliving.co.uk Sent from my iPhone > On 18 Nov 2014, at 08:55, PW pulsewidth2@hotmail.com [Doepfer_a100] wrote: > > Pretty sure this will get you gates every time cv changes: >
2014-11-18 by David Kellett
I bought the uScale rather than the A156 because of its flexibility interns of scales and non scales from chromatic notes - so don't really want an A156. The CV could be - for instance a Theremin where the cv goes out to a quantiser then through a slew / Portamento then to oscill
2014-11-18 by yahoo@doepfer.de
> -----Ursprungliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] > Gesendet: Dienstag, 18. November 2014 08:39 > An: doepfer_a100@yahoogroups.com > Betreff: [Doepfer_a100] Rate of change to CV and Cv change to gate > > > Hi, > > I'm wo
2014-11-18 by PW
Pretty sure this will get you gates every time cv changes: http://www.modulargrid.net/e/elby-designs-cgs762-slope-detector Or just take the clock/gate from whatever is controlling the cv before the uScale. If it's already stepped that is. Sent from my iPad > On Nov 18, 2014, at 3
2014-11-18 by Neil Kagan
The closest to the second but would be the A-156 as when it quantizes it outputs a trigger. I'm not sure about the first part; what is causing the changing rate of the cv? Sent from my iPhone > On 18 Nov 2014, at 07:38, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] wro
2014-11-18 by David Kellett
Hi, I'm wondering how to do two things. 1) To create a CV based (proportional to) on the rate of change of another CV 2) To create a gate when there is a step in a CV. This is particularly but not exclusively the output of a Intellijel uScale - so when there is a new pitch I woul
2014-11-17 by Neil Kagan
Aside from shuffle, I’m all sorted! Would rather buy some fun modules…. > On 17 Nov 2014, at 21:46, Nicholas Keller maq163x2@gmail.com [Doepfer_a100] > wrote: > > > The DT has built-in shuffle, quantize, and MIDI, right? Worth keeping, I reckon, unless you need the money > > Nick
2014-11-17 by Neil Kagan
Aside from shuffle, I’m all sorted! Would rather buy some fun modules…. > On 17 Nov 2014, at 21:46, Nicholas Keller maq163x2@gmail.com [Doepfer_a100] wrote: > > > The DT has built-in shuffle, quantize, and MIDI, right? Worth keeping, I reckon, unless you need the money > > Nick >
2014-11-17 by Nicholas Keller
The DT has built-in shuffle, quantize, and MIDI, right? Worth keeping, I reckon, unless you need the money Nick > On Nov 17, 2014, at 3:26 PM, "Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100]" wrote: > > Hi guys, > > As I have the brilliant A-155/154 combination I don’t have muc
2014-11-17 by Neil Kagan
Hi guys, As I have the brilliant A-155/154 combination I don’t have much need for my Dark Time. Is anyone looking for one? Neil
2014-11-17 by Neil Kagan
Just what I was thinking!! Imagine running the A-137-1 into it, or a graphic VCO... Sent from my iPhone > On 17 Nov 2014, at 11:39, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] wrote: > > > > > Yes, there will be two sockets for sine and cosine input. > > > > > That
2014-11-17 by achtung_999
> > Yes, there will be two sockets for sine and cosine input. > > That's great, that begs for misuse :D Curious what sounds that will result in....[?] [Non-text portions of this message have been removed]
2014-11-17 by Neil Kagan
Amazing thanks! There's a lot of excitement over this from people I've spoken to, as it's such a unique sound but they want to get a Doepfer module to do it with. Regards, Neil Sent from my iPhone On 17 Nov 2014, at 09:19, yahoo@doepfer.de [Doepfer_a100] wrote: >> Thanks Dieter,
2014-11-17 by yahoo@doepfer.de
> Thanks Dieter, > > > I know it's a stupid question but will the external oscillator be patched via the front panel? I don't want to have to > make a connection between them internally. > > > Neil Yes, there will be two sockets for sine and cosine input. But there will be probab
2014-11-15 by Bakis Sirros
http://www.aliodie.com/index.php?_l=1&_w=1&__fidSez=2&cnt=211&__pg= New Alio Die | Parallel Worlds cd album Out Soon. (album full of Doepfer A100, Euro, Serge and Buchla modulars) thanks, Bakis. www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Worlds/1920939
2014-11-15 by Nicholas Keller
I got the feeling he was incredibly likable after seeing him in IDOW:HE Nick > On Nov 15, 2014, at 8:44 AM, "florian anwander fanwander@mnet-online.de [Doepfer_a100]" wrote: > > Hello Nick > > > I hope you don't mind but I added your method to my blog page, > That was my intentio
2014-11-15 by florian anwander
Hello Nick > I hope you don't mind but I added your method to my blog page, That was my intention ;-) > crediting you with the A-165 idea and including a hyperlink to your > book at Schneidersladen. That was not intended ;-) but it is very kind (and I like to support Schneiders,
2014-11-14 by Nicholas Keller
Florian, I hope you don't mind but I added your method to my blog page, crediting you with the A-165 idea and including a hyperlink to your book at Schneidersladen. Nick > On Nov 12, 2014, at 10:18 AM, "Florian Anwander fanwander@mnet-online.de [Doepfer_a100]" wrote: > > Hello Ni
2014-11-14 by Neil Kagan
Thanks Dieter, I know it's a stupid question but will the external oscillator be patched via the front panel? I don't want to have to make a connection between them internally. Neil Sent from my iPhone > On 14 Nov 2014, at 14:56, yahoo@doepfer.de [Doepfer_a100] wrote: > > > In th
2014-11-14 by yahoo@doepfer.de
> In the absence of a new A-126, does anyone have an idea of how to create a frequency shifter using existing Doepfer modules? > > Neil I think that's not possible because of the required dome filter. That's a special allpass filter that shifts all frequencise from about 50Hz to
2014-11-14 by Neil Kagan
In the absence of a new A-126, does anyone have an idea of how to create a frequency shifter using existing Doepfer modules? Neil Sent from my iPhone
2014-11-13 by David Kellett
Thanks - just sent a pic back to you of what is wrong. Thanks for getting back to me so promptly this morning. David www.movingisliving.co.uk Sent from my iPhone > On 13 Nov 2014, at 08:54, yahoo@doepfer.de [Doepfer_a100] wrote: > > David, > > I have sent an answer to your email
2014-11-13 by yahoo@doepfer.de
David, I have sent an answer to your email address with attached pictures that show the flat bars and the position of the bars. Best wishes Dieter Doepfer > -----Ursprungliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] > Gesendet: Mit
2014-11-12 by Nicholas Keller
Thanks Florian! All the methods you mention seem very interesting, however I don't have the Trigger Modifier module, so I've never been able to experiment with that. Perhaps I ought to find or build one and try it. If you'd like to publish your ideas for shuffle, I could link to
2014-11-12 by David Kellett
Hi. My monster case arrived today and I'm having trouble fixing the Case to the Base. I have the brackets provided but I can't seem to find how to align the two. Do you have to take the feet off the Case to make it fit? David www.movingisliving.co.uk Sent from my iPhone
2014-11-12 by Florian Anwander
Hello Nick Great blog post! When I read your post, another method to create a shuffled clock came to my mind: Any LFO -> A-162(1) Trigger Delay -> A-165 Trigger Modifier +/-Out -> A-162(2) Trigger Delay (or A-142-1) Or Any LFO -> A-142-1 Voltage Controlled Decay/Gate -> A-165 Tri
2014-11-12 by David Kellett
Great track!! I shall listen to some more from your collection later :-) David www.movingisliving.co.uk Sent from my iPhone > On 12 Nov 2014, at 09:50, Neal Layton neal.layton@ntlworld.com [Doepfer_a100] wrote: > > Great blog post - thanks for sharing. > > I've quite recently acq
2014-11-12 by Nicholas Keller
Neal, Pretty mental track that you posted! www.niroke.blogspot.com If you browse back through my earlier posts, you'll see I have a few about the A-155 and one about modifying the A-119 and A-142 to isolate the comparator function in each for external control, separate from the "
2014-11-12 by Neal Layton
Great blog post - thanks for sharing. I've quite recently acquired an a 155 so your shuffle method is really interesting to me. Though it's not shuffling, I've been experimenting with 'pseudo random' sequences using a155 with an a160, a161 and an a151. An a119 creates gates depen
2014-11-11 by Nicholas Keller
http://niroke.blogspot.com/2014/11/more-155-tricks-way-to-shuffle-your.html?m=1 I started this blog post over a year ago, but for one reason after another, I haven't completed a post since Oct 2013. In that time I managed to lose some of the audio/video examples for several posts
2014-11-11 by Steve Jenkins
Nick - you summed it up perfectly. Thanks Out of office - sent from mobile device > On 10 Nov 2014, at 21:49, Nicholas Keller maq163x2@gmail.com [Doepfer_a100] wrote: > > If I understand correctly, you're asking if the A-190 communicates with an A-154/155 if on the same buss. The
2014-11-10 by Nicholas Keller
If I understand correctly, you're asking if the A-190 communicates with an A-154/155 if on the same buss. The answer is no, the A-154/155 only receives power from the buss, no CV/Gate control. All patching of the A-154/155 is via the front panel. You can opt to control the advanc
2014-11-10 by Steve Jenkins
Sorry - it was a rhetorical comment about the general issue of controlling the A154 in various ways. Should have made that clear. Steve > On Nov 10, 2014, at 8:50 PM, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] wrote: > > > There isn't any bus connection, it's a patching job
2014-11-10 by Neil Kagan
There isn't any bus connection, it's a patching job. Neil Sent from my iPhone > On 10 Nov 2014, at 16:47, Steve Jenkins sj230962@gmail.com [Doepfer_a100] wrote: > > Just to clarify : > > > If an external MIDI clock source is being supplied via the A190 MIDI IN connection, will th
2014-11-10 by Steve Jenkins
Just to clarify : If an external MIDI clock source is being supplied via the A190 MIDI IN connection, will the A-154 pick up MIDI clock and MIDI ON/OFF signals from the bus ? Presumably the bus access is disabled when you patch in a trigger/gate signal from the A190 into the EXT
2014-11-10 by Nicholas Keller
Good. Happy to help! Nick Sent from the future > On Nov 10, 2014, at 9:39 AM, "Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100]" wrote: > > Nick that's EXACTLY what I needed - I'd not inverted the signal. Thanks! > > Neil > > Sent from my iPhone > >> On 10 Nov 2014, at 14:37, Nic
2014-11-10 by Neil Kagan
Nick that's EXACTLY what I needed - I'd not inverted the signal. Thanks! Neil Sent from my iPhone > On 10 Nov 2014, at 14:37, Nicholas Keller maq163x2@gmail.com [Doepfer_a100] wrote: > > I agree with Florian that your question was not clear. It would be helpful to know what your
2014-11-10 by Neil Kagan
Sorry guys, I have clock - the A-154 is running fine. I just want to start / stop remotely. I understand that they both need a trigger, and I have tried the contact switch on my MS-20 but it isn't working as I thought. Neil Sent from my iPhone > On 10 Nov 2014, at 14:28, fitz fyt
2014-11-10 by Nicholas Keller
I agree with Florian that your question was not clear. It would be helpful to know what your entire setup (in regards to this sequencer patch) entails. IF YOUR A-154/155 IS NOT RUNNING, and you believe it should be working, flip the switch at the lower right of the A-154 labeled
2014-11-10 by fitz
I use the A154 and for control it I use the A190 in order to send clock start and stop to the A154 ( you can use a A190 -4 or 190-8 , you need the clock and reset output from the A190 to the A154 ) GEORGES -------------------------------------------- En date de : Lun 10.11.14, Fl
2014-11-10 by Florian Anwander
Hmmm, may be one of us does not understand. I try to explain my thoughts: If you want to control the start/stop buttons externally, there is the usually the fact, that you also have some external device (for example a drum machine) to which you want to sync the sequencer to: the
2014-11-10 by Neil Kagan
That's my question! I'm asking what other A-154 owners have used, ideally I'd like to use existing doepfer modules to toggle stop/start. I tried last night using the voltage controlled switch but it didn't get me very far! Neil Sent from my iPhone > On 10 Nov 2014, at 09:54, Flor
2014-11-10 by Florian Anwander
Am 10.11.2014 10:48, schrieb Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100]: > > > Sorry, I meant I'm not using midi. I'm just trying to find a way to > trigger the stop/start via the external inputs. Ok, then my question should read: what is your external source? Or: What exte
2014-11-10 by Neil Kagan
Sorry, I meant I'm not using midi. I'm just trying to find a way to trigger the stop/start via the external inputs. Neil Sent from my iPhone > On 10 Nov 2014, at 09:37, Florian Anwander fanwander@mnet-online.de [Doepfer_a100] wrote: > > Hello Neil, > > the most important informat
2014-11-10 by Florian Anwander
Hello Neil, the most important information is missing: what kind of interface are you using, to convert the MIDI-Clock into signals that are "digestible" for the A100? Florian Am 09.11.2014 21:27, schrieb Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100]: > Any of you out there ha
2014-11-09 by Neil Kagan
Any of you out there have experience triggering the external stop / start on the A-154? What Deeper modules did you use to do it? Or did you do it via another connection? I’m giving up on midi clock! Neil
2014-11-09 by Neil Kagan
Hi to all of you, As I’ve been lucky enough to get my hands on the new modules I wanted I now have the following going: A-161 Clock Sequencer (£30) A-138m Matrix Mixer (£70) A-124 Wasp Filter (£50) A-114 Ring Modulator (£40) Only used in a home studio, with little rack rash and w
2014-11-07 by David Kellett
Hi, A quick question - I'm not at home and wondering about a patch idea but can't experiment until Tuesday. If I take a Gate from the A149-2 and feed it to both the Tigger and the Sample of a T&H circuit it will hold a high for the duration of the Gates high and then stay high un