Yahoo Groups archive
Messages
Page 46 of 564 · 28179 messages matched
2014-11-28 by achtung_999
Just patch this as you read along..... A155 #1: top row > A150 (top) input 1, bottom row > A150 (top) input 2, vc input A150 (top) via mult from 1-8/9-16 output A154. Output A150 (top) = first 16 step sequence A155 #2: top row > A150 (bottom) input 1, bottom row > A150 (bottom) i
2014-11-28 by Steve Jenkins
Thanks Diieter - but I’m still a little confused. If the 2xA155s are running in parallel and I select first at step 2 and last at step 5 (on the dials - but what I really want to select are step 2 and step13 of a 16 step sequence), then when the first A155 cycles through, the A15
2014-11-28 by yahoo@doepfer.de
> Hi all - did a quick search through the old topics but couldn't find an answer to my question, so here goes... > How does the First/Last step controller work when 2x155s are in series, linked by the A150 VCS ? > When the 9/16 switch is flipped, does the last step output automat
2014-11-28 by Steve Jenkins
Thanks for this Nick. I’ll go and do that right now! Funny how the simple things evade me. As for the 16/3..I have one. And a Schaltwerk. But looking to sell both in the coming weeks - just simply run out of room living abroad here in Malaysia. Small apartment and lots of gear (p
2014-11-28 by Nicholas Keller
I only have one and I'm still too comfortable under the covers to go an check, but couldn't you test this with just one? Flip to 9/16 and adjust last step. If it shortens the pattern, then I suppose it does not work as you hoped. In that case, consider an MAQ16/3, but then such c
2014-11-28 by sj230962@gmail.com
I'm parting with my Schaltwerk. Not enough space in my apartment here in Malaysia and as I'll be back in the UK for Xmas to handle a potential sale I thought I would see if anyone was interested in making me a serious offer for it before I post on Muffwiggler. Pls e-mail or messa
2014-11-28 by sj230962@gmail.com
Hi all - did a quick search through the old topics but couldn't find an answer to my question, so here goes... How does the First/Last step controller work when 2x155s are in series, linked by the A150 VCS ? When the 9/16 switch is flipped, does the last step output automatically
2014-11-26 by yahoo@doepfer.de
> Would heat cause the sockets to malfunction? Since it works fine for a few hours, then all of a sudden stops until cooled > down a bit. > > /Janne Changing temperatures could cause the socket to "twist" a bit. But that's only a guess. You can find this out easily by using an ex
2014-11-26 by Janne Gson Berg
Would heat cause the sockets to malfunction? Since it works fine for a few hours, then all of a sudden stops until cooled down a bit. /Janne > To: Doepfer_a100@yahoogroups.com > From: Doepfer_a100@yahoogroups.com > Date: Wed, 26 Nov 2014 10:52:23 +0100 > Subject: AW: AW: [Doepfer
2014-11-26 by achtung_999
Thanks for the info, Dieter! Sounds good! Ernst On Wed, Nov 26, 2014 at 12:06 PM, yahoo@doepfer.de [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: > Thanks Dieter! > Had totally forgotten about that part of the homepage. > About the A160-2: I assume it also provides for the
2014-11-26 by yahoo@doepfer.de
> Thanks Dieter! > Had totally forgotten about that part of the homepage. > About the A160-2: I assume it also provides for the connection of a A161 like on the original A160? > > Ernst The prototype does not have this connector. Maybe we will add it to the final version. But we
2014-11-26 by achtung_999
Thanks Dieter! Had totally forgotten about that part of the homepage. About the A160-2: I assume it also provides for the connection of a A161 like on the original A160? Ernst On Wed, Nov 26, 2014 at 11:38 AM, yahoo@doepfer.de [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote:
2014-11-26 by yahoo@doepfer.de
> Dieter, I was wondering where you had announced these modules. > They suddenly started to show up on Modulargrid and Muffwigglers. > You normally used to first announce them in this group... I felt we were left a bit outside the loop :D > All of them look very appealing though!
2014-11-26 by Bakis Sirros
many great new modules!the new thru-zero VCO and the final version of A157, finally! From: "yahoo@doepfer.de [Doepfer_a100]" To: Doepfer_a100@yahoogroups.com Sent: Wednesday, November 26, 2014 11:52 AM Subject: AW: [Doepfer_a100] New modules > Ok, I had no idea about the A-110-3.
2014-11-26 by achtung_999
Dieter, I was wondering where you had announced these modules. They suddenly started to show up on Modulargrid and Muffwigglers. You normally used to first announce them in this group... I felt we were left a bit outside the loop :D All of them look very appealing though! Ernst O
2014-11-26 by Neil Kagan
Oh god, they all sound brilliant!!! Sent from my iPhone > On 26 Nov 2014, at 09:52, yahoo@doepfer.de [Doepfer_a100] wrote: > > > Ok, I had no idea about the A-110-3. Dieter, is this a cut down version of the Quadrature? > > > > Regards, > > > > Neil > > No. Currently we have prot
2014-11-26 by yahoo@doepfer.de
> Ok, I had no idea about the A-110-3. Dieter, is this a cut down version of the Quadrature? > > Regards, > > Neil No. Currently we have prototypes of three totally different types of thru-zero VCOs to be in the starting blocks: a quadrature version with sine/cosine outputs (pref
2014-11-26 by yahoo@doepfer.de
> Hi Dieter, > > I will test this as soon as I have some spare time. I rearranged the case a bit to see if it will solve the heat problem. > The problem only happens for the top quantizer, the lower one works perfectly even if the top one stops working. > > Best regards, > > Jann
2014-11-26 by Neil Kagan
Of the unreleased A-110-3 Thru Zero Triangle oscillator? Neil Sent from my iPhone > On 26 Nov 2014, at 09:18, sj230962@gmail.com [Doepfer_a100] wrote: > > Raul's World of Synths on Youtube does a pretty good job of demo'ing the basic functions and outputs of many modules - only p
2014-11-26 by sj230962@gmail.com
Raul's World of Synths on Youtube does a pretty good job of demo'ing the basic functions and outputs of many modules - only pity is many videos tend to be less than musical, but at least it lets a prospective user see/hear what he could be buying. There is a link on the Doepfer w
2014-11-26 by Janne Gson Berg
Hi Dieter, I will test this as soon as I have some spare time. I rearranged the case a bit to see if it will solve the heat problem. The problem only happens for the top quantizer, the lower one works perfectly even if the top one stops working. Best regards, Janne To: Doepfer_a1
2014-11-26 by Neil Kagan
Ok, I had no idea about the A-110-3. Dieter, is this a cut down version of the Quadrature? Regards, Neil Sent from my iPhone
2014-11-25 by yahoo@doepfer.de
> Hi! > > I have a A-156 dual quantizer where the top quantizer stops working after being switched on for a few hours when it is in > the case (P6, not the best ventilation in there). The output is either 0V or +5V. Removing the module from the case, > cooling it by blowing on it
2014-11-24 by Neil Kagan
Just got this second hand; it's brilliant! The Voltage Control is a great amount of fun, and the built in VCA is so useful. One question, I also have the A-143-2; are both of these envelopes exponential? I only ask as they both get different responses from my A-132-3 VCA. Cheers,
2014-11-24 by Janne Gson Berg
Hi! I have a A-156 dual quantizer where the top quantizer stops working after being switched on for a few hours when it is in the case (P6, not the best ventilation in there). The output is either 0V or +5V. Removing the module from the case, cooling it by blowing on it, it start
2014-11-23 by Neil Kagan
Ah ok! Thanks for the reply :) Neil Sent from my iPhone > On 23 Nov 2014, at 20:51, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] wrote: > > No they are a completely different concept. > I did however manage to make something resembling a pitch tracker before with th
2014-11-23 by achtung_999
No they are a completely different concept. I did however manage to make something resembling a pitch tracker before with the A172 min/max or it might have been two of those... Like I said in an earlier thread I regret not notating that patch. :-( Also forgot which piece of techn
2014-11-23 by Neil Kagan
So, I’m buying an A-167 as it seems a pretty useful module to have. This is probably a very stupid question but is this the same ‘type’ (if there is such a thing) of comparator as the one in the A-196? If so, how would I go about assembling a PLL? Neil
2014-11-20 by Neil Kagan
I have two P6 suitcases for sale, £250 each. Collection only due to size, either from Tottenham or Islington. Neil Sent from my iPhone
2014-11-20 by brianhamlin
http://www.ossatureboispaille.com/bse/rqvoctakxkvnopuwqfuzta.yzhntadznrsgaahljfs brianhamlin@btinternet.com
2014-11-19 by achtung_999
That sounds like a cool module. Doepfer Slope detector A167-2 ? :D On Wed, Nov 19, 2014 at 12:27 PM, yahoo@doepfer.de [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Hi Florian, > This approach has the disadvantage that the voltage always will drop > between two triggers. It
2014-11-19 by yahoo@doepfer.de
Hi Florian, > This approach has the disadvantage that the voltage always will drop > between two triggers. It will be like a sawtooth waveform; the lower the > trigger rate is the more the voltage will look like a sawtooth. And the > higher a change of rate is, the worse the slew
2014-11-19 by yahoo@doepfer.de
Hello Florian, > > When the incoming CV falls the CV output becomes negative > This is the pitfall. The output voltage should be always unidirectional, > no matter whether the incoming voltage is rising or falling. For this I mentioned the rectifier version. Best wishes Dieter
2014-11-19 by florian anwander
Hello Dieter once again me... Am 19.11.2014 09:05, schrieb yahoo@doepfer.de [Doepfer_a100]: > A total different approach is to generate a CV from the rate of > trigger signals coming from the quantizer A-156. For this kind of a > frequency to voltage generator has to be patched,
2014-11-19 by David Kellett
Hi Dieter, I would definitely buy two or three such modules!! I think it would be very useful for making a quantised - easier to play! - Theremin sound more natural. And the same would go for the Ribbon Controller. I think there would be many other applications - even to help Kei
2014-11-19 by florian anwander
Hello Dieter Am 19.11.2014 09:05, schrieb yahoo@doepfer.de [Doepfer_a100]: > When the incoming CV falls the CV output becomes negative This is the pitfall. The output voltage should be always unidirectional, no matter whether the incoming voltage is rising or falling. Take the ex
2014-11-19 by yahoo@doepfer.de
> Hi, > > I'm wondering how to do two things. > 1) To create a CV based (proportional to) on the rate of change of another CV > 2) To create a gate when there is a step in a CV. This is particularly but not exclusively the output of a Intellijel > uScale - so when there is a new
2014-11-18 by David Kellett
Right - now I see!! But your right it would be quite hard to do!!! That is probably why I couldn't get my head round it and would like a Module to do the hard stuff for me!! David www.movingisliving.co.uk Sent from my iPhone > On 18 Nov 2014, at 16:56, florian anwander fanwander@
2014-11-18 by florian anwander
Am 18.11.2014 17:30, schrieb David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100]: > > > But I'm still not quite clear how I would create > a CV based on the rate of change of another CV > Thats where I jumped in: Getting a CV based the change amount of an incoming CV is very
2014-11-18 by David Kellett
Thanks - I shall bear that in mind!! David www.movingisliving.co.uk Sent from my iPhone > On 18 Nov 2014, at 16:47, Nicholas Keller maq163x2@gmail.com [Doepfer_a100] wrote: > > I see, I think. > > So say you want to play "honky-tonk" from C1 to C2. If you do it slow, you was slow
2014-11-18 by Nicholas Keller
Yes, I like that idea as well. Could be applied to a ratcheting sequence also > On Nov 18, 2014, at 11:33 AM, "David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100]" wrote: > > I like it Florian!!! A nice image!! Not quite the same as my Theremin idea - speed of hand generatin
2014-11-18 by Nicholas Keller
I see, I think. So say you want to play "honky-tonk" from C1 to C2. If you do it slow, you was slow slew....and if you do it fast, you want faster slew. I think most "players" would consider using a foot pedal to control the slew rate as they played, and most "sequecerers" would
2014-11-18 by David Kellett
I like it Florian!!! A nice image!! Not quite the same as my Theremin idea - speed of hand generating a VC ie a VC based on the rate that the Theremin's VC output changes. David www.movingisliving.co.uk Sent from my iPhone > On 18 Nov 2014, at 15:51, florian anwander fanwander@mn
2014-11-18 by David Kellett
Yes a voltage control slew would be part of it - but the voltage control for the slew would be based on how fast the pitch changes. So imagine a Theremin - it's output goes to a quantiser which quantises to steps but the rate of change - a slide generated by the VC Slew acting on
2014-11-18 by florian anwander
I also already thought about a feature, that David asked for (I even think I asked Dieter for it a long time ago). So it was not new to me. Let me explain it with an Example: Imagine Keith Emerson goes skating, falls over his own feet (he is better in playing minimoog than in ska
2014-11-18 by Nicholas Keller
Based on your description in this "clarifier", would a VC slew work? Like the A-171? Otherwise, and after reading the other messages in this thread, I still don't understand what you're trying to do. I thought perhaps Florian had seen through your description and realized you wan
2014-11-18 by PW
Oh another one I just thought of. I believe the amazing Toppobrillo Sport Modulator can function as a slope detector with gate out. Sent from my iPhone > On Nov 18, 2014, at 9:00 AM, Nathan Cearley nathancearley@gmail.com [Doepfer_a100] wrote: > > it matters what your cv source i
2014-11-18 by Nathan Cearley
it matters what your cv source is. you may have to change it to a source that has gates out in addition to the cv out (like a sequencer with cv and gate out). or try and find a random voltage source that has both cv and gate out. or, get a doepfer quantizer and run the cv source
2014-11-18 by florian anwander
Hello David, Am 18.11.2014 14:18, schrieb David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100]: > Maybe I've misunderstood the use of the LFO clock in your patch? yes, you misunderstood: I do not describe the circuit, that creates a gate at a CV change. I assume, that this ci
2014-11-18 by David Kellett
I sort of follow that (I think) but I'm not sure how the LFO as clock works in this - I don't want a regular gate but a gate that occurred only with a change of CV. So imagine that an LFO signal (possible modulated so it is not quite regular) goes into a quantiser (not A156!) and