Yahoo Groups archive
Messages
Page 453 of 564 · 28179 messages matched
2004-02-03 by nectarios01
Yes that is what I was planning on getting originaly, but I was not sure how you could use that as a flanger before I got some explanations in this forum. I'm gonna go with the RS120 now for sure. Thanks again. Peace out.
2004-02-03 by selfoscillate
i think that the planned cv delay will be good for flangings maybe. if you are also using modules from analogue systems, you can use the rs120 comb filter together with an lfo to get a heavy flanging sound. best wishes ingo --- In Doepfer_a100@yahoogroups.com, "nectarios01" wrote
2004-02-03 by Florian Anwander
Hi Nectarios, >>no. A phaser uses phase shifting (so-called all pass >>filters), a flanger a normal delay. Just a small addition to Dieters explanations: Every analog filter creats phase shifting. You may try this by the following setup: LFO----\ \ +--------VCF-Lowpass----\ | \ V
2004-02-03 by nectarios01
Thanks for clearing that out for me Dieter and Florian. So which nice flanger will fit in the Doepfer frame and produces great sounds? One that sweeps slowly for a long time period as well, would be just great! Peace out.
2004-02-03 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] Flanger module and > unusual sounds. > Date: Tue, 3 Feb 2004 12:11:35 +0100 > > > Correct me if I am wrong, but a phaser effect is > sweeping throughs > > in the frequency spectr
2004-02-03 by Bakis Sirros
hello julian, in general,i use my a138a's for cv signals and my a138b's for audio.but,when i run out of a138b's, i also use my a138a's for audio too.also,despite the fact that the a135 vc mixer is linear, i use it for audio all the time,so,just experiment what fits your needs bes
2004-02-03 by Bakis Sirros
hello ingo, what?you did release an album in the same label?i really didn't know! :-) ok,just kidding. btw,ingo's album(Self Oscillate)is,also,very good! i have heard parts or whole tracks from the album and it's really good!of course,ingo's album is full of his big A100 system t
2004-02-03 by selfoscillate
hello julian, > The A-135 VC mixer for example uses linear vcas on an audio signal. > > Now without the vcas the module is just a simple mixer, just like an A-138. > So, are the attenuators on the input signal linear or exponential? from my understanding, they are linear. > Ps. I
2004-02-03 by selfoscillate
hello bakis, well, maybe you are a bit too fast ;-) i've listened to the snaps and i like them very much. can't wait to get the cd. btw, i have also released an album (self oscillate) on the same label, and i'm curious about opinions too. best wishes ingo --- In Doepfer_a100@yaho
2004-02-03 by selfoscillate
hopefully the a143-4 will incorporate phase control of the waveforms, should be no problem then. best wishes ingo --- In Doepfer_a100@yahoogroups.com, "modularcharles" wrote: > Regarding the A-143 synchronized LFOs, one potentially useful feature > might be the ability to put the
2004-02-02 by Julian
Hi there, I have just aqquired some new modules, and am just thinking about linear and exponential differences. (vcas / mixers) Now i know what the techincal difference is between linear and exponential, but things seem so get a little hazy... The A-135 VC mixer for example uses
2004-02-02 by levka0
Hi list, I would like to trade or sell the following modules: A-105 24dB Low Pass (SSM Type) (almost new; hardly used) A-151 Quad Sequential Switch (almost new; hardly used) A-114 Ringmod. (used but VCG) A-120 24dB Low Pass (Moog type) (used but VCG) I would prefer to trade for a
2004-02-02 by Bakis Sirros
ok,thanks charles. :-) bakis. --- modularcharles wrote: > Dude! Lighten up! It's only been 9-1/2 hours since > you posted the > info about your album to the list! > > I don't know about other people, but I'm still > catching up with email > from the weekend and have intended to c
2004-02-02 by ALMAGATA@telefonica.net
Excellent idea! Josue. > Regarding the A-143 synchronized LFOs, one potentially useful > feature > > might be the ability to put the waves into quadrature > relationship, > With digital LFOs I have to imagine that wouldn't be that > difficult, > > would it? > >
2004-02-02 by modularcharles
Dude! Lighten up! It's only been 9-1/2 hours since you posted the info about your album to the list! I don't know about other people, but I'm still catching up with email from the weekend and have intended to check out your link. One thing I've seen when I tell even my closest fr
2004-02-02 by synth_freak_2000
hello list, unfortunately,no one seems to be interested in the music we make using our a100's?only in buying new a100 modules? anyway,if anyone listens to the short mp3's of my album's tracks,tell me your opinion,please,i would really want to know your opinions. also,regarding th
2004-02-02 by modularcharles
Regarding the A-143 synchronized LFOs, one potentially useful feature might be the ability to put the waves into quadrature relationship, for quad or stereo panning and other situations where you might want to drive filters etc. in quadrature (cf. Serge Quadrature Oscillator, htt
2004-02-02 by nectarios01
I really need a nice sounding flanger, that fits in my Doepfer racks. I checked the A.Sys RS120 Comb Filter, but I do not understand how you can select between a flanger effect, and a phaser effect. Correct me if I am wrong, but a phaser effect is sweeping throughs in the frequen
2004-02-02 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] The next batch dates? > Date: Mon, 2 Feb 2004 13:16:22 +0100 > > > -----Urspr'ngliche Nachricht----- > > Von: Tommy DOG [mailto:mrsvomit@tommydog.com] > > Gesendet: Freitag, 30.
2004-02-02 by Bakis Sirros
--- Dieter Doepfer wrote: > From: "Dieter Doepfer" > To: "Bakis Sirros" > Subject: AW: [Doepfer_a100] Why not syncing A-143-4 > with MIDI clock? > Date: Mon, 2 Feb 2004 13:16:21 +0100 > > > -----Urspr'ngliche Nachricht----- > > Von: dj_allin [mailto:dj_allin@hotmail.com] > > Gese
2004-02-02 by Bakis Sirros
hello florian, ok,but aren't the a143-2 quad lfo and a143-3 quad adsr cheaper modules for the standard users?so why not doepfer make the a143-1 and a143-4 advanced modules for the more adventurous users.right? bakis. --- Florian Anwander wrote: > Hi Ingo (and others), > > I have
2004-02-02 by Florian Anwander
Hi Ingo (and others), I have to admit I do not(!) appreciate the discussion about refining those 143-x modules. I think the original idea of those modules was to have some simple bread&butter modules in a large amount for a stunning good price. Now I find that we discuss about ma
2004-02-02 by selfoscillate
hello florian, yes, i can see your point and it is very understandable, the a143-2 and a143-3 are still such bread/butter modules. of course the a143-x modules are all intended as low-budget modules, the a143-1 also. i have to admit that i get easily excited about modular stuff a
2004-02-02 by Bakis Sirros
hello all, :-) my second PARALLEL WORLDS album "INSIGHT" is out now in the UK label SHIMA RECORDS(the label of the doepfer_a100 group member John Maddocks).this album is full of my huge Doepfer A100 modular,Technosaurus Selector modular,Analogue Systems RS-Integrator modular,Anal
2004-02-02 by Bakis Sirros
hello ingo, i agree about your comments,i beleive that the more features in the new modules,the better! bakis. --- selfoscillate wrote: > hello list, > > some thoughts about the planned modules. > > a143-1 > ------ > the suggested version 4 is clearly my > favorite. some things w
2004-02-02 by selfoscillate
hello list, some thoughts about the planned modules. a143-1 ------ the suggested version 4 is clearly my favorite. some things which would be nice: additional end-of-attack trigger outs, retrigger inputs, switches instead of jumpers (even when it is more expensive), range switche
2004-02-01 by Keld Sørensen
I started out with the BS-1 system and disconnected the VCO´s and EG´s from the buss. Both the EG sometimes fired when only one recived a gate signal. So I don´t use the Buss system at all. Works fine for me. Keld --- In Doepfer_a100@yahoogroups.com, "Julian" wrote: > Hi there, >
2004-02-01 by Josef Mueller
>Very nice Yes, but some changes are necessary: the sine wave is not really a sine wave, I will design the scope with a lightpoint and so on... When all corrections are done I will send the project to the Doepfer- company and then the production can start... ;-) Josef --- In Doep
2004-02-01 by Keld Sørensen
Very nice - and fun too.. When do you start production? ;^) Keld --- In Doepfer_a100@yahoogroups.com, "Josef Mueller" wrote: > > www.modular-planet.de/_aspekte/oszillator.html > > Josef
2004-02-01 by Keld Sørensen
Very nice - and fun too.. When do you start production? ;^) Keld --- In Doepfer_a100@yahoogroups.com, "Josef Mueller" wrote: > > www.modular-planet.de/_aspekte/oszillator.html > > Josef
2004-01-31 by Julian
Hi there, One of those times when i feel like maybe im missing the point. Every time i move the modules about in my system, i always have to be careful to plug the vcos in different sides of the busboard, so i dont have to have then on a common pitch (yes, i know i can mod them a
2004-01-31 by Bilinger
dear bakis, dear dieter, note that i am very enthousiastic about vc lfo quad modules yeah yeah yeah as much as i am not sure about the other's 143, quad AD, quad ADSR, I think vc lfo is so interesting. so i dont know. still sometimes i feel all this talk about rising edge, fallin
2004-01-31 by Tim Gray
How deep are the doepfer modules? Alternately, how much depth for mounting does the portable suitcase rack provide? I am thinking of racking soon to be purchase modules in an SKB pop up mixer rack, but it only provides around 4 3/4 of in inch of mounting depth... do you think thi
2004-01-31 by Julian
Hi Tim, As you know, i have also been working on the skb route. Ill just update you on what ive been up to: The deepest module that i have here is the a112 sampler module. Most modules are a lot shallower. I took my schroff sidepannels to the machineist yesterday to be (accuratly
2004-01-31 by synth_freak_2000
hello list, a new poll has been created about the A143-4 Multiple Synchrionized VC LFO's module.it will last only 10 days so,please, vote! also,the poll about the A143-1 QUAD AD Generator is ending in 5 days only so,take a second and vote,please.we are 382 members and only 18 vot
2004-01-31 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: Would you like Doepfer to release the A143-4 MULTIPLE SYNCHRONIZED VC LFO's MODULE? a description of it's features:A module that contains two or more voltage controlled LFO's with the frequencies deriv
2004-01-31 by synth_freak_2000
hello tom, as far as i know,the next batch of modules will come in february/march and it will include:A137 wave multiplier,A154 sequencer controller,A197 analog meter,A101-3 modular vactrol phase filter(PROBABLY),A149-2 digital random gates. bakis. [doepfer_a100]group owner --- I
2004-01-30 by Tommy DOG
With the various modules that have been talked about recently (143xx, SOU expander, Steiner filter, level meter) Is there any planned released dates for anything specific? So many good looking options BUT what is planned next? TD
2004-01-30 by Josef Mueller
www.modular-planet.de/_aspekte/oszillator.html Josef
2004-01-30 by dj_allin
8 step ASR function? I want one now! Regards Zoran
2004-01-30 by dj_allin
Hi, The most important things first: being able to establish relationships between syncable LFOs is a great idea. Second: since module is digital (nothing wrong there), why not syncing master LFO to MIDI clock, and second LFO to master LFO in integer relationship that can be alte
2004-01-30 by Bakis Sirros
hello UF, i agree with you about the awesome a152 and the a143-3!i also agree with the range switches of the a143-3 quad adsr! bakis. --- unknown freak wrote: > I'm completely psyched about this A-152, it totally > rocks. No comments at > this point beyond that, I'm kind of stunn
2004-01-30 by David Salter
A143-4 is the version I'm most interested in, plus a standard 143 quad lfo also. David -----Original Message----- From: Bakis Sirros [mailto:synth_freak_2000@yahoo.com] Sent: 30 January 2004 14:33 To: Doepfer_a100 group Subject: [Doepfer_a100] doepfer's comments on the A143-4 mul
2004-01-30 by Bakis Sirros
dieter says: "Look at the updated pages for A-152 and A-143-3 on our web site. So far very poor response to A-143-4. This surprises me as from my point of view this module is the most interesting one. During demonstrations, work shops, fairs or simply when I'm playing with the A-
2004-01-30 by unknown freak
I'm completely psyched about this A-152, it totally rocks. No comments at this point beyond that, I'm kind of stunned. The A143-3 is great too. My only question about it would be whether range switches would be out of the question. The bulk of its uses are probably in the "normal
2004-01-30 by Bakis Sirros
hello list, just look at the new updated a152 votage addressed s&h/switch module.the possibilities with this module will be huge!an 8 input/output clock controlled,voltage addressed switch plus an 8 output analog shift register! also,the updated a143-3 quad adsr will be awesome,t
2004-01-30 by ilanode
LFO having PWM would be cool. Either way suggested would be fine for me. Regards Ilanode
2004-01-30 by p. hendricks
Not that it's needed on this module, but it does come to mind that out of the 3(now 4) LFO's, none have Pulse Width Modulation, like say the Korg MS-50 LFO. It should go along with a VC-LFO, so adding it to the 143-2 may be too much, but maybe the A-147 could be updated? or a del
2004-01-29 by synth_freak_2000
hello list, only Seven days until the new a143-1 poll is concluded.so,please vote in our polls.ok? thank you, bakis.
2004-01-29 by Bakis Sirros
hi ingo, agree.but i would prefer the a143-1 with both "end of attack" trigger outputs and the comparators with threshold level knobs and decay trigger outputs,too. bakis. --- selfoscillate wrote: > > i like the idea of a threshold level control, > especially > when the "end of a