Yahoo Groups archive
Messages
Page 50 of 564 · 28179 messages matched
2014-10-10 by David Kellett
I think I missed an email - who is RDJ? I do want more than 1/4 tones. David www.movingisliving.co.uk Sent from my iPhone > On 10 Oct 2014, at 13:12, Nicholas Keller maq163x2@gmail.com [Doepfer_a100] wrote: > > No worries, I suppose I sounded rather defensive as well. I do think
2014-10-10 by Nicholas Keller
No worries, I suppose I sounded rather defensive as well. I do think RDJ is a genius, an incredible talent, and probably MY favorite user (although I'm uneducated) of a custom scale. I just mentioned it as an example earlier because it had been in the press and provided an exampl
2014-10-10 by achtung_999
Sorry if it came over like I was pointing the finger like that. It was just a mild poke, hence the wink smiley. Ernst On Fri, Oct 10, 2014 at 1:32 PM, Nicholas Keller maq163x2@gmail.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: I meant just that, custom scales like RDJ
2014-10-10 by Nicholas Keller
I meant just that, custom scales like RDJ uses, and I was in no way suggesting that he invented anything. > On Oct 10, 2014, at 5:12 AM, "achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100]" wrote: > > This thread is getting better and better! Thanks for all the other ment
2014-10-10 by Paul Boobyer
You could also achieve different scales/microtones via small amounts of cv to the FM input of an oscillator. I've had great results making arabic-like scales (at least that's what they sound like!) using the woggle cv out of the wogglebug this way. Bit of a trial and error approa
2014-10-10 by David Kellett
I'm reading the Addac207 manual and it looks amazing and it also seems they have sorted the teething troubles. It sounds like it would do all the quantizing I wish for :-) David www.movingisliving.co.uk Sent from my iPhone > On 10 Oct 2014, at 10:12, achtung_999 heinrich.himmelwa
2014-10-10 by achtung_999
This thread is getting better and better! Thanks for all the other mentioned alternatives. Nicholas what do you mean with AFX scales? Microtonal tuning existed several decades before Richard D. James began talking about it last month ;-) On Fri, Oct 10, 2014 at 7:44 AM, David Kel
2014-10-10 by David Kellett
Yep. www.movingisliving.co.uk Sent from my iPhone > On 10 Oct 2014, at 02:43, Nicholas Keller maq163x2@gmail.com [Doepfer_a100] wrote: > > That A.Sys one doesn't do eastern or "AFX" scales either, only semitones in various configurations > > Sent from the future > >> On Oct 9, 20
2014-10-10 by David Kellett
Sounds as though that is western semitones only. David www.movingisliving.co.uk Sent from my iPhone > On 10 Oct 2014, at 01:07, Loren Nerell lnerell@earthlink.net [Doepfer_a100] wrote: > > How about Analogue Systems RS130, Programmable Scale Generator? > > http://www.analoguesyst
2014-10-10 by David Kellett
I'm a fan of the uScale too but, yes, it does not do microtonal. I actually have 3 uScales :-) David www.movingisliving.co.uk Sent from my iPhone > On 9 Oct 2014, at 23:58, Nicholas Keller maq163x2@gmail.com [Doepfer_a100] wrote: > > I really like the functions on the Intellijel
2014-10-10 by Nicholas Keller
That A.Sys one doesn't do eastern or "AFX" scales either, only semitones in various configurations Sent from the future > On Oct 9, 2014, at 8:07 PM, "Loren Nerell lnerell@earthlink.net [Doepfer_a100]" wrote: > > How about Analogue Systems RS130, Programmable Scale Generator? > >
2014-10-10 by Loren Nerell
How about Analogue Systems RS130, Programmable Scale Generator? http://www.analoguesystems.co.uk/modules/rs130.htm -----Original Message----- From: "David Kellett davidkellettwoulf@ yahoo.com [Doepfer_a100]" Sent: Oct 9, 2014 5:06 AM To: "doepfer_a100@ yahoogroups.com " Subject:
2014-10-09 by Nicholas Keller
I really like the functions on the Intellijel uScale, but it doesn't really do microtonal. > On Oct 9, 2014, at 5:13 PM, "David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100]" wrote: > > Thanks for the further info. I'm wading through some other MuffWiggler posts about it. It
2014-10-09 by David Kellett
Thanks for the further info. I'm wading through some other MuffWiggler posts about it. It does sound very interesting and would probably do what I want. I have emailed Addac already so hopefully will know more. I have time to do lots of research as that purchase will not be for a
2014-10-09 by Nathan Cearley
if i were you i would just write andre at addac directly with your questions. from my experience and what little i know the previous firmware had the following problems 1) if channel 2, 3 or 4 had separate cv running in, and that cv was ever at 0v, that channel reverted to the cv
2014-10-09 by David Kellett
That link had only two posts in it? David www.movingisliving.co.uk Sent from my iPhone > On 9 Oct 2014, at 17:12, Tonko Sekulo oknot24@gmail.com [Doepfer_a100] wrote: > > ADDAC quantizer has some serious issues and it is being updated with a new firmware. No units are being sold
2014-10-09 by David Kellett
Ummmm I shall have to check that out before any purchase!! Though if the quantizer works for 12 semi tones would other divisions of a bolt be very different? David www.movingisliving.co.uk Sent from my iPhone > On 9 Oct 2014, at 16:44, Martin Fay martin@martinfay.com [Doepfer_a10
2014-10-09 by David Kellett
That too is very good to know!! David www.movingisliving.co.uk Sent from my iPhone > On 9 Oct 2014, at 17:12, Tonko Sekulo oknot24@gmail.com [Doepfer_a100] wrote: > > ADDAC quantizer has some serious issues and it is being updated with a new firmware. No units are being sold unti
2014-10-09 by David Kellett
Sounds very interesting - I'm trying to download the manual but it seems very slow for some reason. David www.movingisliving.co.uk Sent from my iPhone > On 9 Oct 2014, at 17:04, Nathan Cearley nathancearley@gmail.com [Doepfer_a100] wrote: > > the addac quantizer has microtuning a
2014-10-09 by Tonko Sekulo
ADDAC quantizer has some serious issues and it is being updated with a new firmware. No units are being sold until the bugs are removed, see this topic: http://www.muffwiggler.com/forum/viewtopic.php?p=1689582#1689582 On Thu, Oct 9, 2014 at 6:04 PM, Nathan Cearley nathancearley@g
2014-10-09 by Nathan Cearley
the addac quantizer has microtuning and is super flexible. On Thu, Oct 9, 2014 at 11:56 AM, Tonko Sekulo oknot24@gmail.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: A lot of people are using ES-3 and Silent Way for microtonal scales. Probably you could use ES-3/ES-6 co
2014-10-09 by Tonko Sekulo
A lot of people are using ES-3 and Silent Way for microtonal scales. Probably you could use ES-3/ES-6 combo as a quantizer for cv sources. t. On Thu, Oct 9, 2014 at 5:49 PM, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Interesti
2014-10-09 by achtung_999
Interesting thought indeed! I had not spend to much thought on it as you see :D I was just thinking about being able to tune beatings of two oscillators with two (more correctly said perhaps) semi-microtonal quantizers.. It was just a quick thought though... Ernst On Thu, Oct 9,
2014-10-09 by Martin Fay
I thought an Ardcore had 8-bit D/A, that would not be enough precision for microtuning which requires cent-level (bare minimum!) precision? Martin Sent from my iPhone On 9 Oct 2014, at 16:28, "achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100]" wrote: > I think the Ardcor
2014-10-09 by David Kellett
I shall have a serious look at the Ardcore then. It sounds as though it would be good for a lot of odder things. But the trouble would be that I think I'd need possibly several channels of quantization and that's gonna get expensive!! - Ernst, what where you thinking of doing wit
2014-10-09 by achtung_999
I think the Ardcore is indeed the easiest way to go. I was thinking of a microtonal quantizer myself this week. I don't know why... but it just crossed my mind. My conclusion then was also an arduino based solution like the Ardcore. Grzt Ernst On Thu, Oct 9, 2014 at 2:56 PM, Davi
2014-10-09 by David Kellett
That sounds doable - though I'm no programmer. I shall check it out. Another use would be to pull the stored random quarter tones of the A149-1 to scales that contain quarter tones and semitones - like Arabic music for instance. Any other ideas? David www.movingisliving.co.uk Sen
2014-10-09 by JS Home
One approach would be an Ardcore module set up as a quantiser (there is a quantiser sketch in the core set) which you could then tune as you wished Sent from my iPhone > On 9 Oct 2014, at 13:06, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] wrote: > > Hi, > > I'm wonde
2014-10-09 by David Kellett
Hi, I'm wondering if anyone knows of a module or modules that could be set up to take control voltages and quantized them to a non western scale. I'm thinking about making a price of music that is tuned to harmonics and would like to be able to quantize sequencers, other controll
2014-10-09 by David Kellett
I would very much like a Doepfer through zero Oscillator. I'd be happy to buy two and put them together as you describe but I would prefer a dual module myself as that is tidier. David www.movingisliving.co.uk Sent from my iPhone On 9 Oct 2014, at 09:05, yahoo@doepfer.de [Doepfer
2014-10-09 by yahoo@doepfer.de
> I loved the idea you had a few years back when you just released > the A143-9 Dieter.... > Making a new version as extension of that module. > What Happened to that idea? > > > grtz > > Ernst The idea is still the same, i.e. using an external quadrature oscillator for the frequ
2014-10-08 by achtung_999
I loved the idea you had a few years back when you just released the A143-9 Dieter.... Making a new version as extension of that module. What Happened to that idea? grtz Ernst On Wed, Oct 8, 2014 at 6:45 PM, yahoo@doepfer.de [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: >
2014-10-08 by yahoo@doepfer.de
> I got that one too and I think it's great. But I'm pretty sure > Dieter said he was already working on a new one. That's true. A new pure analog frequency shifter is still on our to-do list. We had to stop the old A-126 because the CEM3382 was no longer available. But it will s
2014-10-08 by Scott Rogers
I got that one too and I think it's great. But I'm pretty sure Dieter said he was already working on a new one. At 09:04 AM 10/8/2014, you wrote: I recently bought an Audio Damage frequency shifter & am quite impressed. I assumed it might be quite a long time before I could get a
2014-10-08 by JS Home
I recently bought an Audio Damage frequency shifter & am quite impressed. I assumed it might be quite a long time before I could get a Doepfer one! There are a few other makes out there too but mine is good value for money Jonathan Shapero Sent from my iPhone > On 8 Oct 2014, at
2014-10-08 by florisvanhoof@ecomail.org
Anyone wants to sell their A-126 frequency shifter? I can pay or trade for other euro modules, a couple of DIY things too. I'm in Belgium, but I'm sure the module will fit in the mail too. please let me know directly via 2206rec@gmail.com +also check out my own shows at http://ww
2014-10-07 by syndromeda@telenet.be
Thanks, I would rather not use it in the a-100 system but I wanted to use a couple of A-180-2's as a mini patchbay in my Doepfer-rack to connect some FX, so desolder the circuit boards so I was hoping they were stereo. I hope you understand. Thanks, regards, ---------------------
2014-10-07 by Florian Anwander
And it is important: The doepfer sockets rely on that you are using a cable with a mono plug! Simply hold a stereo plug aside a doepfer socket and you will see, that the ground connector of the Doepfer socket contacts the shaft of the plug where the ring of a stereo plug is locat
2014-10-07 by Kai Niggemann
Mono. Sent from my phone On 07.10.2014, at 14:56, "syndromeda@telenet.be [Doepfer_a100]" wrote: > > > Does anybody knows if the sockets used on the Multiple A-180-2 are mono or stereo? > > Thanks, > > Danny > > > >
2014-10-07 by syndromeda@telenet.be
Does anybody knows if the sockets used on the Multiple A-180-2 are mono or stereo? Thanks, Danny
2014-10-03 by Florian Anwander
Hello Bakis thanks for the "heads up". Florian
2014-10-03 by Bakis Sirros
hi group, recently, i did a scan of my pc and found around 30 trojan horses. they are now secured. i do not know if this could affect the doepfer_a100 yahoo group, but i mentioned this just to be sure. also, in the a100 yahoo group, out of the 1700 members, there might be 1-2 spa
2014-10-01 by yahoo@doepfer.de
> hi, friends > I d like to boost a bit the input of my A121 filter, because i > find it too low.., i read something about a120 mod but what about a121? > > Thanks a lot , and best wishes from Spain! > Miguel Should be possible by reducing the value of R1 (220k) e.g. to 100k or 4
2014-10-01 by ventrality@gmail.com
hi, friends I d like to boost a bit the input of my A121 filter, because i find it too low.., i read something about a120 mod but what about a121? Thanks a lot , and best wishes from Spain! Miguel
2014-09-25 by syndromeda@telenet.be
Thanks for the explanation Dieter, time to play now...?? Have a nice evening, ------------------------------------------------------ Danny Budts info@syndromeda.be www.syndromeda.be ----- Oorspronkelijk bericht ----- Van: yahoo@doepfer.de [Doepfer_a100] Aan: Doepfer a100 Verzonde
2014-09-25 by yahoo@doepfer.de
> Hi Dieter, > > > I have just received my A-127 BOM today and I found out something > misleading. The short manual says the stand factory setting for > jumpers J2-4-6 are on bandpass, so on the lower row, the two left > contacts,looking at page 3, but the jumpers on mine are on
2014-09-25 by syndromeda@telenet.be
Hi Dieter, I have just received my A-127 BOM today and I found out something misleading. The short manual says the stand factory setting for jumpers J2-4-6 are on bandpass, so on the lower row, the two left contacts,looking at page 3, but the jumpers on mine are on the lower row,
2014-09-25 by David Kellett
Thank you Dieter, My system has an A190-1 so there must be 5v power in the lower row. Now I have to scratch my head to work out which modules I can take out for the moment to play with the LDB!! I'm saving for a Monster Base but my plan to buy it next week has had to change due t
2014-09-25 by yahoo@doepfer.de
If the +5V control LED on the right end if the bus boards is "on" this bus board has +5V available. Otherwise you have to install the A-100AD5. Older versions of the A-100BS2 (with interface A-190-1) were equipped with an A-100AD5 in the lower row. The new versions (with A-190-4
2014-09-25 by David Kellett
Hi, I have a Basic System 2 in a silver 19" Doepfer rack. On the power rail I can see that one pin is labeled 5v. Does this mean I DON'T need a separate 5v supply for a module that needs 5v? I have a Delptronics LDB 1e arriving later today that needs 5v Thanks for help, David www