Yahoo Groups archive
Messages
Page 70 of 564 · 28179 messages matched
2013-05-31 by Florian Anwander
Hello to both Nathan and Jon: is this a mechanical sound or does it come from the speakers? If it comes from the speakers, disconnect the audio out from the A100 system, and connect a headphone with a mini jack connector to the output of the last module in the audio chain (exampl
2013-05-31 by yahoo@doepfer.de
> Hi Doepfer team -- > > My 6U Suitcase has recently started making a sound when any > module is sent out to mixer or my 3U skiff. It's a small, > higher-frequency white noise-ish kind of sound. I removed each > module one by one to test to see if they were causing it, but it > i
2013-05-31 by yahoo@doepfer.de
> Hi > > I've just tried to adjust P2 and P3 cv scale out adjusters as > they've both been out since I bought the unit. I have a lead > connected from cv1 out or cv2 out into an A-110 and nothing's > happening. The adjusters are having no effect at all on the pitch. > > Help > >
2013-05-31 by yahoo@doepfer.de
> Dear Dieter, > > Many thanks for taking the time to reply in person! > > There are no Doepfer markings on the underside of the pedal, or > anywhere else on the unit. > > The only label on the underside says Volume Pedal SN 09 3094 > Manikin Electronics with a website and logo.
2013-05-31 by Pieter Volger
Hiya, selling my new Sequencer-modules and a Joy-Stick module: A-155 Analog/Trigger Sequencer 220,- Euro A-154 Sequencer Controller 120,- Euro A-174-1 Joy Stick 60,- A-160 Clock Divider 45,- Euro All four modules are really like new (except the usual screw marks from putting them
2013-05-30 by Bakis Sirros
FS, in fine condition: Livewire AFG vco, price 300 euros total, including registered shipping and pp fees. really really Awesome VCO, but i do need the money... paypal payment. please, contact me OFF-LIST thanks, :-) Bakis. [Non-text portions of this message have been removed]
2013-05-30 by analogmonster@ymail.com
On 30 May 2013, at 22:56, analogmonster@ymail.com wrote: > > On 30 May 2013, at 18:36, Kim Johnsson wrote: > > > Hi guys, > > > > I wonder if you can help me. Some time ago I bought the AS BDxx modules > > second hand, but they came without the power cable. Do you know whether th
2013-05-30 by analogmonster@ymail.com
On 30 May 2013, at 18:36, Kim Johnsson wrote: > Hi guys, > > I wonder if you can help me. Some time ago I bought the AS BDxx modules > second hand, but they came without the power cable. Do you know whether the > standard Doepfer flat cables (as well as apparently the additional
2013-05-30 by Nathan Cearley
Hi Jon...my case makes noises too...but its not a high pitched white noise sound its more a low hum. i was wondering if I need to always use a ground lift when I plug in...anyhow, i am interested in the replies you get--hopefully something might help me out too! [Non-text portion
2013-05-30 by codotinc
Hi Doepfer team -- My 6U Suitcase has recently started making a sound when any module is sent out to mixer or my 3U skiff. It's a small, higher-frequency white noise-ish kind of sound. I removed each module one by one to test to see if they were causing it, but it is definitely t
2013-05-30 by Kim Johnsson
Hi Julian, > From memory (which may be wrong!) you will want the narrower, 10 pin cables, > and you will need to twist them. > The pcbs should have the pin voltages / polarity marked, so just be sure that > you line this up correctly with the doepfer bus board - the tech spec of
2013-05-30 by julianfincham
I just had a look for you - its outlined in this document fairly well - http://www.analoguesolutions.org.uk/concussor/manuals/concussor.pdf It suggests (i think) using the 16 pin cable, and just offsetting it, but i found that was not possible on some A.Sol modules, due to compon
2013-05-30 by Kim Johnsson
Hi guys, I wonder if you can help me. Some time ago I bought the AS BDxx modules second hand, but they came without the power cable. Do you know whether the standard Doepfer flat cables (as well as apparently the additional +5V adapter for the BD99) work for installation into my
2013-05-30 by mark
Hi I've just tried to adjust P2 and P3 cv scale out adjusters as they've both been out since I bought the unit. I have a lead connected from cv1 out or cv2 out into an A-110 and nothing's happening. The adjusters are having no effect at all on the pitch. Help Mark
2013-05-30 by julianfincham
From memory (which may be wrong!) you will want the narrower, 10 pin cables, and you will need to twist them. The pcbs should have the pin voltages / polarity marked, so just be sure that you line this up correctly with the doepfer bus board - the tech spec of which is on the web
2013-05-30 by Neal Layton
Dear Dieter, Many thanks for taking the time to reply in person! There are no Doepfer markings on the underside of the pedal, or anywhere else on the unit. The only label on the underside says Volume Pedal SN 09 3094 Manikin Electronics with a website and logo. As described in my
2013-05-29 by yahoo@doepfer.de
> Hi, > > I have a faulty A-147, probably I will have to send it to repair but still > wanted to ask if this is some known issue I could solve by myself. > > The unit has stopped working some time ago, BUT sometimes when I power my > modular it works as it should but only for few
2013-05-29 by yahoo@doepfer.de
> Hi all, > > I recently bought an FP5 foot controller and A-177-2 External > Foot Controller II > however when using it to control various modules I have felt it > hasn't been behaving as I expected and when checking it with a > voltmeter I found it is putting out a CV of roughl
2013-05-29 by neal_beard_ahm
Hi all, I recently bought an FP5 foot controller and A-177-2 External Foot Controller II however when using it to control various modules I have felt it hasn't been behaving as I expected and when checking it with a voltmeter I found it is putting out a CV of roughly +6.7V to +11
2013-05-29 by sm.ms@virgin.net
--- In Doepfer_a100@yahoogroups.com, wrote: > > > Hi > > > > Can anyone help me please with the following issue? > > > > I am using a dark time with an A-100 system. > > > > I find that the tuning produced by CV 2 output is different > > (slightly flat) when compared to the tunin
2013-05-29 by Neal Layton
Problem solved. Both VCO's are now tuned to the c1 standard. Thanks!
2013-05-29 by Oknot Olukes
Hi, I have a faulty A-147, probably I will have to send it to repair but still wanted to ask if this is some known issue I could solve by myself. The unit has stopped working some time ago, BUT sometimes when I power my modular it works as it should but only for few minutes. Then
2013-05-29 by yahoo@doepfer.de
> Hi > > Can anyone help me please with the following issue? > > I am using a dark time with an A-100 system. > > I find that the tuning produced by CV 2 output is different > (slightly flat) when compared to the tuning produced by CV1. > My 3 A-110 VCO's can be adjusted to be in
2013-05-28 by Florian Anwander
Hello This difference may have happened, when the previous owner did adjust the octave tracking. YOu simply may use the offset-trimmer P6 to adjust the tuning. See http://www.doepfer.de/a110_tec.htm Florian Am 28.05.2013 12:21, schrieb neal_beard_ahm: > Hi all, > > I have two A11
2013-05-28 by sm.ms@virgin.net
Hi Can anyone help me please with the following issue? I am using a dark time with an A-100 system. I find that the tuning produced by CV 2 output is different (slightly flat) when compared to the tuning produced by CV1. My 3 A-110 VCO's can be adjusted to be in tune with a midi
2013-05-28 by neal_beard_ahm
Hi all, I have two A110 vco's in my system, one bought new from the UK dealer, and another more recently from eBay. However I have noticed this second Ebay VCO is pitched slightly lower. If the first VCO is fine tuned to 5, this second one has to be fine tuned to roughly 7 to cre
2013-05-27 by Bakis Sirros
hi, Doepfer A-135 VC-Mixer (version 1 of course) WITH A-144 Morphing Controller, price total 110 euros including registered shipping and pp fees. (new price of the combo 190 euros). so this price is around 57% of new ! these are great modules. only selling them cause i have these
2013-05-26 by Mikhail Novikov
Hello! After not using my synth for more than a year I have decided that it's time to let it go. So for sale - 9HP suitcase + modules. All in good condition, but some screws are missing. Comes with assortment of patch cables. I suspect VCOs would need calibration. List of modules
2013-05-26 by Jack Johnaldson
Thanks Florian! I unhooked my whole studio and then hooked it all back up and now at least the mopho works correctly. I have not checked the p600 yet but I'm sure it will be fine as well. Thanks, Jack On May 21, 2013, at 1:36 AM, Florian Anwander wrote: > Am 19.05.2013 12:54, sch
2013-05-25 by Jack Johnaldson
I unhooked everything in my studio ( it was a rats nest )and hooked it all back up this seems to have fixed the problem at least with my mopho I have not tried my p600 yet. so I must have had a midi loop going on somewhere. Thanks, Jack On May 21, 2013, at 12:04 PM, Jack Johnalds
2013-05-25 by Hyperdust
Dear Doepfer enthusiasts, I've just been moderating the Soundcloud group and have added loads of new tracks. It's very lively - lots of tracks being suggested. Another guy - Junk Rhythm - from San Francisco is helping moerate but I'm still getting behind. If anyone else wants to
2013-05-24 by andy butler
many thanks for that from me also! It's so rare to get such advice from manufacturer. Andy Butler yahoo@doepfer.de wrote: > All additional outputs should be equipped with serial protection resistors > (e.g. 220 Ohm) to avoid the damage of the Dark Energy circuitry in case of a >
2013-05-24 by Martin Alaçam
Thank you! Cheers, Martin On Fri, May 24, 2013 at 9:13 AM, wrote: > ** > > > > Hello, > > > > First post here; to start with: thanks Mr. D'pfer for the great > instruments. > > I have a Korg MS10, Dark Energy and a small Doepfer case (full) at the > > moment, but I will be expand
2013-05-24 by yahoo@doepfer.de
> Hello, > > First post here; to start with: thanks Mr. Döpfer for the great instruments. > I have a Korg MS10, Dark Energy and a small Doepfer case (full) at the > moment, but I will be expanding into 6u very soon. I could very well use > all of the "no jumper" outputs of DE as
2013-05-23 by Martin Alaçam
Hello, First post here; to start with: thanks Mr. Döpfer for the great instruments. I have a Korg MS10, Dark Energy and a small Doepfer case (full) at the moment, but I will be expanding into 6u very soon. I could very well use all of the "no jumper" outputs of DE as mentioned in
2013-05-21 by Jack Johnaldson
Thanks Dieter! Thanks, Jess On May 21, 2013, at 1:04 AM, wrote: > > Hello group I was just wondering if it's a Dave Smith/sequential > > circuits thing or if it's an analog synth problem. ever since I > > updated my Darktime too the latest firmware it hangs notes on > > both my D
2013-05-21 by Florian Anwander
Am 19.05.2013 12:54, schrieb Jack: > Hello group I was just wondering if it's a Dave Smith/sequential > circuits thing or if it's an analog synth problem. ever since I > updated my Darktime too the latest firmware it hangs notes on both my > DSI Mopho and my SCI Prophet600 but no
2013-05-21 by yahoo@doepfer.de
> Hello group I was just wondering if it's a Dave Smith/sequential > circuits thing or if it's an analog synth problem. ever since I > updated my Darktime too the latest firmware it hangs notes on > both my DSI Mopho and my SCI Prophet600 but not on my Korg > ms2000. I have tried
2013-05-19 by Jack
Hello group I was just wondering if it's a Dave Smith/sequential circuits thing or if it's an analog synth problem. ever since I updated my Darktime too the latest firmware it hangs notes on both my DSI Mopho and my SCI Prophet600 but not on my Korg ms2000. I have tried all the d
2013-05-15 by flosynth
Thank you for your reply, is not it great result, monitoring the keyboard is still not correct, It would not be a service that could look at Doepfer module, I really need to work on my songs and on my blog dedicated to jutement primarily Doepfer modular http://synth4you.blogspot.
2013-05-15 by James Husted
You can adjust the scale from the front panel. Download the manual from the A-190-1 page on the Doepfer site and it tells you how to do it. -James On May 15, 2013, at 7:23 AM, flosynth wrote: > Hello, > > I have a problem with one of my A-190-1 > until this morning everything was
2013-05-15 by flosynth
Hello, I have a problem with one of my A-190-1 until this morning everything was fine, but this afternoon I wanted to work on a composition and followed the keyboard is no longer do, re, mi, fa, sol, la, so, do (C, D, E, F, G, A, B, C) but there are now more or less a fourth inte
2013-05-14 by codotinc
Thanks, Dieter. Wow, that sounds like exactly what I need! Very excited about this. Cheers, Jon --- In Doepfer_a100@yahoogroups.com, wrote: > > > Excellent news! Do we have any more information yet regarding the > > LFO rate and audio range when used as a VCO? Cheers! > > The ran
2013-05-14 by codotinc
For sale or trade, worldwide: A-110 VCO (two of these) -- US$140 each (US$199 new at Analogue Haven) A-188-1d 4096-stage BBD Analog Delay -- US$165 (US$240 new at Analogue Haven) Only trades I'm really looking for are Intellijel Dixies, v.1 or v.2 or the new Doepfer A-171-2 Volta
2013-05-13 by yahoo@doepfer.de
> Excellent news! Do we have any more information yet regarding the > LFO rate and audio range when used as a VCO? Cheers! The range of the controls is very extreme (much more than usually in A-100 modules). In cycle mode the max. frequency is about 2kHz without external CV and a
2013-05-13 by Pieter Volger
Sorry! I missed the FAQ! Thanks a lot. Pieter Am 13.05.2013 um 10:43 schrieb yahoo@doepfer.de: > > Hi, > > I need a new fuse for my A100 G6 frame but I can't decipher the > > numbers on the old one. CAn someone tell me what fuse I need. > > It's the newer frame with the 1200mA po
2013-05-13 by codotinc
Excellent news! Do we have any more information yet regarding the LFO rate and audio range when used as a VCO? Cheers! --- In Doepfer_a100@yahoogroups.com, wrote: > > > Hi Dieter and Co., > > > > Any more news about this module? Looking forward to it! > > > > Cheers! > > It's not
2013-05-13 by yahoo@doepfer.de
> Hi, > I need a new fuse for my A100 G6 frame but I can't decipher the > numbers on the old one. CAn someone tell me what fuse I need. > It's the newer frame with the 1200mA power pack. > Thanks > > Pieter www.doepfer.com > FAQ > A-100 > values for A-100 fuses Best wishes Dieter
2013-05-13 by yahoo@doepfer.de
> Hi Dieter and Co., > > Any more news about this module? Looking forward to it! > > Cheers! It's not yet available. We expect the first batch next week. Please order the module from the Doepfer representative in your country. Best wishes Dieter Doepfer
2013-05-12 by Bakis Sirros
sorry, one last addition: Livewire Dual Cyclotron, 220 euros total, including pp fees and registered shipping. thanks for the bandwidth! Bakis ________________________________ From: Bakis Sirros To: "Doepfer_a100@yahoogroups.com" Sent: Sunday, May 12, 2013 8:07 PM Subject: Re: [D