Yahoo Groups archive
Messages
Page 88 of 564 · 28179 messages matched
2012-06-05 by Sander Schuurman
Hi, I've assembled the Doepfer A-100 DIY Kit #1 in a wooden Ikea Rast cabinet. When connecting the Transformer to the power supply board a question came into my mind. In the instructions it says for the ground connection -> "housing (only if a metal case is used)". I'm having a w
2012-06-05 by Richard van der Meer
Great performance of a great track. Very nice. regards Richard 2012/6/5 Hyperdust > ** > > > Good morning Doepfer people, > I spent half of my Jubilee celebration recording a classic electro track > called Chase by Giorgio Moroder from the rather dark film "Midnight > Express". >
2012-06-05 by Hyperdust
Good morning Doepfer people, I spent half of my Jubilee celebration recording a classic electro track called Chase by Giorgio Moroder from the rather dark film "Midnight Express". Ableton is controlling the midi loops with my Doepfer A100 doing the bassline and a Prophet-08 holdi
2012-06-04 by achtung_999
The A135 is now reserved for Loren.
2012-06-04 by Julien Rabin
Hi, I have the following modules for sale. All modules are in very good cosmetic and functionnal condition (minus the usual slight rack rash). - A-188-1 (256): 120€ - Addac CV mapping (dual att+offset): 80€ - A-178: 55€ - A-143-2: 160€ - A-116: 50€ Prices do not include shipping
2012-06-04 by Loren Nerell
Sorry, that was meant to be private, I won't let it happen again. -----Original Message----- From: Loren Nerell Sent: Jun 4, 2012 1:31 PM To: Doepfer_a100@yahoogroups.com Subject: Re: [Doepfer_a100] FS: Doepfer A135, Analogue Systems RS30, Doepfer A130 I'd like the mixer if you s
2012-06-04 by Loren Nerell
I'd like the mixer if you still have it. I can do paypal. I'm based in the US. -----Original Message----- >From: achtung_999 >Sent: Jun 4, 2012 1:00 PM >To: Doepfer_a100@yahoogroups.com >Subject: [Doepfer_a100] FS: Doepfer A135, Analogue Systems RS30, Doepfer A130 > >Hello, > >I
2012-06-04 by achtung_999
Hello, I have some modules for sale. All are in excellent condition. I accept paypal or banktransfer and am situated in the Netherlands. Buyer pays shipping and potential paypal costs. The modules: Doepfer A135 - Voltage controlled mixer €92 Analogue Systems RS30 - Frequency to V
2012-06-04 by yahoo@doepfer.de
I did not start the poll :-) Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von henkbloedvlek > Gesendet: Montag, 4. Juni 2012 12:13 > An: Doepfer_a100@yahoogroups.com > Betreff: [Doepfer_a1
2012-06-04 by Florian Anwander
Am 04.06.2012 12:27, schrieb achtung_999: > How about that idea with voltage adressing? I thought that was for me the > main interesting feature... I think the basic idea was a simple(!!!!) 1x8 step sequencer. Such a sequencer could be 14HP. If you want voltage addressing, then t
2012-06-04 by Bakis Sirros
btw, all votes on the original poll are lost, so, everyone needs to vote again on the corrected poll. Bakis ________________________________ From: Bakis Sirros To: Doepfer_a100 group Sent: Monday, June 4, 2012 1:33 PM Subject: [Doepfer_a100] Doepfer A100 Octagon Sequencer module
2012-06-04 by Bakis Sirros
see the corrected poll! ;-) Bakis ________________________________ From: achtung_999 To: Doepfer_a100@yahoogroups.com Sent: Monday, June 4, 2012 1:27 PM Subject: Re: [Doepfer_a100] New poll for Doepfer_a100 How about that idea with voltage adressing? I thought that was for me the
2012-06-04 by Bakis Sirros
the corrected / updated A100 'Octagon' 8 Step Sequencer Module Poll (with VC step addressing!) is now up: http://launch.groups.yahoo.com/group/Doepfer_a100/surveys?id=13140510 please, take few seconds and vote. it will remain open for one month. thanks, Bakis. [Non-text portions
2012-06-04 by achtung_999
How about that idea with voltage adressing? I thought that was for me the main interesting feature... On Mon, Jun 4, 2012 at 12:09 PM, Bakis Sirros wrote: > ** > > > and what if someone wants only one such module? :D > > that's why you probably have to let me create the polls, UN
2012-06-04 by Bakis Sirros
and what if someone wants only one such module? :D that's why you probably have to let me create the polls, UNLESS of course you first think in detail what the poll should read like and all the options of the poll, so it can give a useful result for Dieter. then of course everyon
2012-06-04 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: should doepfer release a new version of the a-112 software? CHOICES AND RESULTS - yes, 38 votes, 97.44% - no, 1 votes, 2.56% For more information about this group, please visit http://groups
2012-06-04 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Should Doepfer release new envelope generator modules? Like ADDSR, AHDSR... with slope parameter for each phase. ADDSR= Attack Decay1 Decay 2 Sustain Release AHDSR= Attack Hold Decay Sustain
2012-06-04 by henkbloedvlek
Hi Dieter, Could you add a extra vote option: "Yes, just 1" And change the line "This way we the costs on the module." to "This way we could keep the costs down" Thanks a million :) Henk
2012-06-04 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: Should Doepfer release a small 8 step sequencer with the following inputs and outputs: Inputs: Start Stop Hold Reset Direction Outputs: CV Individual Gate-outputs a step Trigger / Clock I dont think it
2012-06-04 by henkbloedvlek
I would not advice you to buy directly of PlanB. For further information go to muffwiggler.com --- In Doepfer_a100@yahoogroups.com, "henkbloedvlek" wrote: > > Wow. lot of specs on a small board !!! awesome, what is the price on this? > > --- In Doepfer_a100@yahoogroups.com, achtu
2012-06-03 by achtung_999
No idea Henk. It is not mentioned and I just by chance stumbled upon it.. You should also check the TipTop Audio sequencer. I have my eyes set on that one :D It's a bit pricey though... http://www.tiptopaudio.com/z8k.php On Sun, Jun 3, 2012 at 11:42 PM, henkbloedvlek wrote: > **
2012-06-03 by marcomirri77
+ 1 for a poll! however ... I'd be VERY interested ...
2012-06-03 by henkbloedvlek
Wow. lot of specs on a small board !!! awesome, what is the price on this? --- In Doepfer_a100@yahoogroups.com, achtung_999 wrote: > > How about this Henk? It isn't out yet... but it looks excellent to me! > http://www.eurorackdb.com/node/760/&action= > > > On Mon, May 28, 2012 a
2012-06-03 by henkbloedvlek
--- In Doepfer_a100@yahoogroups.com, wrote: > > > -----Ursprüngliche Nachricht----- > > Von: Doepfer_a100@yahoogroups.com > > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von henkbloedvlek > > Gesendet: Montag, 28. Mai 2012 13:58 > > An: Doepfer_a100@yahoogroups.com > > Betref
2012-06-01 by David
Thanks for the information. I discovered the problem, however....I was quite lucky to do so. Turns out that one of the receptacles on the power rail was defective, so whatever was plugged into it appeared to be defective, since the mere connection to this receptacle would cause t
2012-06-01 by Bakis Sirros
hi all, iNDEX04 is the fourth DiN compilation album and includes two tracks each from the titles DiN31 - 39. The artists on show are Ian Boddy, Parallel Worlds, Markus Reuter, Erik Wøllo, Bernhard Wöstheinrich, ARC & Mazmoneth. As with the previous three DiN samplers (iNDEX01 - D
2012-06-01 by Florian Anwander
Hello David > I got my modular around 10 years ago...so I don't know if it's the > older the new. Is there any code on the casing that would tell me? have a look in the case. An old supply has a black or blue rectangular transformer. http://www.doepfer.de/a100_man/a100nt.gif the
2012-06-01 by yahoo@doepfer.de
Are you sure that your case contains the old power supply ? The old power supply is out of procuction since about 10 years. If the new supply (A-100PSU2) is built into the case an 800 mA fuse is required. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepf
2012-06-01 by David
I have another case, and I have the same 250MA fuse in that one, which has performed perfectly. I got my modular around 10 years ago...so I don't know if it's the older the new. Is there any code on the casing that would tell me? If it is the old style, would an 800mA fuse hurt?
2012-06-01 by David
I have an idea to install another type of module in its place (once I get more fuses), to see if it boots up. If it does, the modules are the problem. If not, then there's a problem with the power rail. I assure you that the total amperage is below 650Ma. And the fuses are 250 MA
2012-06-01 by yahoo@doepfer.de
That's really very strange and I have no simple explanation for this behaviour. Please double check if you use the correct fuse (maybe with the last modules the total current goes beyond the fuse value). Especially pay attention that a time lag fuse (slow blow) with the correct v
2012-06-01 by David
OK...I tested every module on its own, and they all tested OK (didn't blow the fuse), and I began to mount them one at a time back into the case. Everything booted properly, until the very last one, the A-140, which when I booted after plugging this in, caused another fuse to blo
2012-05-31 by David
Thank you...I will try this as soon as I can. --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hello, > > Dieter wrote the essential things of course. I recommend additionally: > > * switch the system off > * unmount the A-130 and A-140 (also unplug the cables for
2012-05-30 by Florian Anwander
Hello, Dieter wrote the essential things of course. I recommend additionally: * switch the system off * unmount the A-130 and A-140 (also unplug the cables for those two modules at the busboard !!! Dieter forgot to mention that). * replace the fuse and switch the system on again.
2012-05-30 by David
Already sent this to Dieter...he suggested I bounce it off you chaps: Dieter's response is first: from the distance it's difficult to make a diagnosis. But as the fuses are blown I'd assume that one of the modules is not installed correctly (e.g. displaced bus connector) and caus
2012-05-29 by Jim Credland
Oh! okay,that is cool!! Yes - I'd like CV addressing :) On 29 May 2012, at 17:49, Igor Medeiros wrote: > jim, on z8000 you can change direction, but as i understood we are not > talking here about this - it's more like vc stage addressing, you could > choose which step will play
2012-05-29 by Igor Medeiros
jim, on z8000 you can change direction, but as i understood we are not talking here about this - it's more like vc stage addressing, you could choose which step will play with a vc input... i would prefer a small sequencer with 8 steps with vc stage addressing than a 16 step with
2012-05-29 by Bakis Sirros
ok, a poll will be up soon! :-) but, to make it more interesting i think it would also be nice to make the sequencer circular shape, just for fun! best regards, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds
2012-05-29 by achtung_999
bumpppppp On Mon, May 28, 2012 at 11:57 AM, achtung_999 wrote: > The Model 38 is sold. > The A130 is still for sale! > > > Doepfer A130 linear VCA - €39
2012-05-29 by pierre leite
Ops, sorry guys! :P On 5/29/12, achtung_999 wrote: > Hi Pierre, > > I am flattered :D > But we normally don't do 'Good seller' reports on this list. > But thanks anyway, > > Ernst > > > > On Tue, May 29, 2012 at 4:29 AM, pierre leite > wrote: > >> ** >> >> >> Successful negotiati
2012-05-29 by achtung_999
Hi Pierre, I am flattered :D But we normally don't do 'Good seller' reports on this list. But thanks anyway, Ernst On Tue, May 29, 2012 at 4:29 AM, pierre leite wrote: > ** > > > Successful negotiation, achtung_999 was attentive and fast, recommend, and > even a day of national h
2012-05-29 by Jim Credland
I've got a Tiptop Z8000 which has all the directional functions ... it's not cheap though, but is quite fab. How do you use the direction input though? I realise I've never used it ... it sounds like it'll make things pretty chaotic ;) I'm usually trying to make my stuff repeatab
2012-05-29 by yahoo@doepfer.de
> Hi > > Well, I was brave enough to calibrate it myself an I've got it > within acceptable tolerances. I'll try measuring the cv outputs > later, but for now I'm just gonna make some noise 😃 > > Thanks for everyone's help and suggestions. > > Mark I suppose that your CV
2012-05-29 by yahoo@doepfer.de
> -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von henkbloedvlek > Gesendet: Montag, 28. Mai 2012 13:58 > An: Doepfer_a100@yahoogroups.com > Betreff: [Doepfer_a100] 1x8 step sequencer like the Milton 21c >
2012-05-29 by pierre leite
Successful negotiation, achtung_999 was attentive and fast, recommend, and even a day of national holiday in his country, could send me the module. Thank you, was a great pleasure dealing with you! Best wishes, Pierre Leite. [Non-text portions of this message have been removed]
2012-05-28 by Florian Anwander
I have to admit, that I find 8-steps always too limited. The least minimal phrase I can stand with is a 4/4 bar with 16th notes, vulgo a 16step sequencer (more would be better). I could imagine a modular sequencer, which consists of an adress generator (like the A154), and variou
2012-05-28 by Ton Akveld
Ah, that's great news! I won't be in your way. The more steps the merrier for my part ;-) A multi-channel one for starters, designed with the 'run away ideas' in mind, it will be than! You have my full support. Keep up the good work you two wizards ;-) --- In Doepfer_a100@yahoogr
2012-05-28 by Zoë Blade
> But I think Zoë arduino based one is a real charm. Thanks! > I am trying to figure out if it can be made into a product. I've been wondering the same thing myself. :D > Question for Zoë: is it expandable to more steps? Yes, the 16 steps are pretty arbitrary. Nina and I are stil
2012-05-28 by Martin Klang
10hp algorithmic gate sequencer, up to 32 steps! http://www.rebeltech.org/modules/stoicheia/ /m On 28 May 2012, at 12:53, henkbloedvlek wrote: > Is there any change on making a Doepfer 1x 8-step sequencer for the A100 systems like the Plan B Milton model 21c ??? > > I find the A-
2012-05-28 by Ton Akveld
And another exotisch one: http://www.makenoisemusic.com/RENE.html But I think Zoë arduino based one is a real charm. I am trying to figure out if it can be made into a product. Question for Zoë: is it expandable to more steps? GreetZ to all, Ton --- In Doepfer_a100@yahoogroups.co