Yahoo Groups archive

QTR-Quadtone RIP

Index last updated: 2026-04-28 23:12 UTC

Thread

QTR new version issue?

QTR new version issue?

2012-11-03 by glemasurier

After installing Mac 10.6.8 and the new version 2.72 of QTR, I continue to get a print error on 13 x 19 paper size, saying the "image size 964 x..." not valid.

I deleted all the print drivers in my system, shut down the Mac for a day, restarted, and reinstalled both the Epson r2400 driver and the new version of QTR.

The Epson driver works fine printing the 13 x19 size, but QTR keeps giving me this "image size not valid" message.

I have no presets.

Does anyone have an idea what might be causing this error message, whether they have encountered this problem or not?

Thanks!
G

Re: [QuadtoneRIP] QTR new version issue?

2012-11-03 by Roy Harrington

On Sat, Nov 3, 2012 at 10:27 AM, glemasurier
<george.lemasurier@...> wrote:
> After installing Mac 10.6.8 and the new version 2.72 of QTR, I continue to get a print error on 13 x 19 paper size, saying the "image size 964 x..." not valid.
>
> I deleted all the print drivers in my system, shut down the Mac for a day, restarted, and reinstalled both the Epson r2400 driver and the new version of QTR.

Did you do the "Reset Printing System..."  ??   You must clean up
Presets not just delete drivers.

>
> The Epson driver works fine printing the 13 x19 size, but QTR keeps giving me this "image size not valid" message.

Don't mess with the Epson driver until you have QTR setup.
In fact don't use an image file that you've printed with borderless.
Don't use Photoshop either.
Use TextEdit or Preview to setup QTR Presets.   Make sure when you
select a paper size that
it isn't an Epson driver paper size.

>
> I have no presets.

You SHOULD use Presets but they must be initialized starting at
Standard not Last Used or something else.

>
> Does anyone have an idea what might be causing this error message, whether they have encountered this problem or not?
>
> Thanks!
> G
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>



-- 
Roy Harrington
roy@...
www.harrington.com

Re: QTR new version issue?

2012-11-03 by glemasurier

Thanks for this info, Roy. I never print borderless. I'm trying to print a 10x15 image on 13x19 paper.

I have been using "paper sizes" pull-down menu that comes up when I select "print" (command-P), then select "print settings." 

Should I be selecting paper size another way for QTR?

Not sure what you mean by "don't use Photoshop?" How else would I access QTR? I don't understand how I would set up QTR through TExtedit or Preview?

It feels like I'm missing something. I have always opened an image in PS, selected print, and selected QTR in the first dialog box, then print settings, then QuadtoneRIP in the next dialog box from the pull down menu, and then selected the curves, etc., that I wanted.

Is there another workflow?

thanks,
G
--- In QuadtoneRIP@yahoogroups.com, Roy Harrington <roy@...> wrote:
Show quoted textHide quoted text
>
> On Sat, Nov 3, 2012 at 10:27 AM, glemasurier
> <george.lemasurier@...> wrote:
> > After installing Mac 10.6.8 and the new version 2.72 of QTR, I continue to get a print error on 13 x 19 paper size, saying the "image size 964 x..." not valid.
> >
> > I deleted all the print drivers in my system, shut down the Mac for a day, restarted, and reinstalled both the Epson r2400 driver and the new version of QTR.
> 
> Did you do the "Reset Printing System..."  ??   You must clean up
> Presets not just delete drivers.
> 
> >
> > The Epson driver works fine printing the 13 x19 size, but QTR keeps giving me this "image size not valid" message.
> 
> Don't mess with the Epson driver until you have QTR setup.
> In fact don't use an image file that you've printed with borderless.
> Don't use Photoshop either.
> Use TextEdit or Preview to setup QTR Presets.   Make sure when you
> select a paper size that
> it isn't an Epson driver paper size.
> 
> >
> > I have no presets.
> 
> You SHOULD use Presets but they must be initialized starting at
> Standard not Last Used or something else.
> 
> >
> > Does anyone have an idea what might be causing this error message, whether they have encountered this problem or not?
> >
> > Thanks!
> > G
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> 
> 
> 
> -- 
> Roy Harrington
> roy@...
> www.harrington.com
>

Re: QTR new version issue?

2013-01-19 by holgermartinphoto

Hi there,

has there been a resolution to this issue? I have just come across the same=
problem trying to print on 17inch roll paper on an Epson Stylus Pro 4900, =
10.6.8 and Photoshop CS6.

Could this be a 10.6.8. problem?
Can people print on the 4900 from other MacOSX versions?

Thanks very much in advance.

All the best,

Holger

--- In QuadtoneRIP@yahoogroups.com, "glemasurier"  wrote:
Show quoted textHide quoted text
>
> Thanks for this info, Roy. I never print borderless. I'm trying to print a 10x15 image on 13x19 paper.
> 
> I have been using "paper sizes" pull-down menu that comes up when I select "print" (command-P), then select "print settings." 
> 
> Should I be selecting paper size another way for QTR?
> 
> Not sure what you mean by "don't use Photoshop?" How else would I access QTR? I don't understand how I would set up QTR through TExtedit or Preview?
> 
> It feels like I'm missing something. I have always opened an image in PS, selected print, and selected QTR in the first dialog box, then print settings, then QuadtoneRIP in the next dialog box from the pull down menu, and then selected the curves, etc., that I wanted.
> 
> Is there another workflow?
> 
> thanks,
> G
> --- In QuadtoneRIP@yahoogroups.com, Roy Harrington  wrote:
> >
> > On Sat, Nov 3, 2012 at 10:27 AM, glemasurier
> >  wrote:
> > > After installing Mac 10.6.8 and the new version 2.72 of QTR, I continue to get a print error on 13 x 19 paper size, saying the "image size 964 x..." not valid.
> > >
> > > I deleted all the print drivers in my system, shut down the Mac for a day, restarted, and reinstalled both the Epson r2400 driver and the new version of QTR.
> > 
> > Did you do the "Reset Printing System..."  ??   You must clean up
> > Presets not just delete drivers.
> > 
> > >
> > > The Epson driver works fine printing the 13 x19 size, but QTR keeps giving me this "image size not valid" message.
> > 
> > Don't mess with the Epson driver until you have QTR setup.
> > In fact don't use an image file that you've printed with borderless.
> > Don't use Photoshop either.
> > Use TextEdit or Preview to setup QTR Presets.   Make sure when you
> > select a paper size that
> > it isn't an Epson driver paper size.
> > 
> > >
> > > I have no presets.
> > 
> > You SHOULD use Presets but they must be initialized starting at
> > Standard not Last Used or something else.
> > 
> > >
> > > Does anyone have an idea what might be causing this error message, whether they have encountered this problem or not?
> > >
> > > Thanks!
> > > G
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > 
> > 
> > 
> > -- 
> > Roy Harrington
> > roy@
> > www.harrington.com
> >
>

Re: QTR new version issue?

2013-01-21 by holgermartinphoto

Hi again,

looks like I found the solution and apologies for misunderstanding the previous instructions. 'Resetting the Print System' helped. I thought this just refers to deleting presets and to removing/adding printers. If anyone else wonders what this means and how it is done, you can find the details here:

http://support.apple.com/kb/HT1341?viewlocale=en_US&locale=en_US

As these instructions also talk about this process updating permissions, I repaired permissions on my machine as well using disk utility (No idea whether this helped).

Re-installed the printer using the QTR script before any other printer and I am not getting the image size invalid error anymore. I have not tried printing using the Epson driver yet.

Interestingly, when opening the QTR page in print settings, the last used adjustments (curves etc.) were still present. That did not seem to bring the problem back however.

Now trying to work out how to print on small custom paper sizes off roll paper, but that is a different issue.

Cheers,

Holger


--- In QuadtoneRIP@yahoogroups.com, "holgermartinphoto"  wrote:
Show quoted textHide quoted text
>
> Hi there,
> 
> has there been a resolution to this issue? I have just come across the same=
> problem trying to print on 17inch roll paper on an Epson Stylus Pro 4900, =
> 10.6.8 and Photoshop CS6.
> 
> Could this be a 10.6.8. problem?
> Can people print on the 4900 from other MacOSX versions?
> 
> Thanks very much in advance.
> 
> All the best,
> 
> Holger
> 
> --- In QuadtoneRIP@yahoogroups.com, "glemasurier"  wrote:
> >
> > Thanks for this info, Roy. I never print borderless. I'm trying to print a 10x15 image on 13x19 paper.
> > 
> > I have been using "paper sizes" pull-down menu that comes up when I select "print" (command-P), then select "print settings." 
> > 
> > Should I be selecting paper size another way for QTR?
> > 
> > Not sure what you mean by "don't use Photoshop?" How else would I access QTR? I don't understand how I would set up QTR through TExtedit or Preview?
> > 
> > It feels like I'm missing something. I have always opened an image in PS, selected print, and selected QTR in the first dialog box, then print settings, then QuadtoneRIP in the next dialog box from the pull down menu, and then selected the curves, etc., that I wanted.
> > 
> > Is there another workflow?
> > 
> > thanks,
> > G
> > --- In QuadtoneRIP@yahoogroups.com, Roy Harrington  wrote:
> > >
> > > On Sat, Nov 3, 2012 at 10:27 AM, glemasurier
> > >  wrote:
> > > > After installing Mac 10.6.8 and the new version 2.72 of QTR, I continue to get a print error on 13 x 19 paper size, saying the "image size 964 x..." not valid.
> > > >
> > > > I deleted all the print drivers in my system, shut down the Mac for a day, restarted, and reinstalled both the Epson r2400 driver and the new version of QTR.
> > > 
> > > Did you do the "Reset Printing System..."  ??   You must clean up
> > > Presets not just delete drivers.
> > > 
> > > >
> > > > The Epson driver works fine printing the 13 x19 size, but QTR keeps giving me this "image size not valid" message.
> > > 
> > > Don't mess with the Epson driver until you have QTR setup.
> > > In fact don't use an image file that you've printed with borderless.
> > > Don't use Photoshop either.
> > > Use TextEdit or Preview to setup QTR Presets.   Make sure when you
> > > select a paper size that
> > > it isn't an Epson driver paper size.
> > > 
> > > >
> > > > I have no presets.
> > > 
> > > You SHOULD use Presets but they must be initialized starting at
> > > Standard not Last Used or something else.
> > > 
> > > >
> > > > Does anyone have an idea what might be causing this error message, whether they have encountered this problem or not?
> > > >
> > > > Thanks!
> > > > G
> > > >
> > > >
> > > >
> > > > ------------------------------------
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > 
> > > 
> > > 
> > > -- 
> > > Roy Harrington
> > > roy@
> > > www.harrington.com
> > >
> >
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.