Yahoo Groups archive
Messages
Page 75 of 144 · 7194 messages matched
2005-11-02 by John P
update to serge-fans.com history http://www.serge-fans.com/history_braheny.htm Kevin Braheny Fortune show & tell. if you can't read english, enjoy the nice synthporn. -- m/n/m/l surreal electronic music, sound, noise http://www.mnmlnoise.com
2005-10-23 by Carbon111
John P wrote: > Anybody know something about this? Maybe it was something of Andre's? Thats the only "website with Serge patches" I can think of. http://www.angelfire.com/music2/theanalogcottage/ I can think of a way to do a leslie sim with 2 vcas and a quadriture oscillator (or
2005-10-23 by John P
Anybody know something about this? -------- Original Message -------- Subject: serge system Date: Sat, 22 Oct 2005 11:35:47 -0700 From: Lisa Davidson lisaxdavidson@... > To: johnp299792@... Hi, A few years ago, I came across a website about Serge patches. One of the things it sho
2005-10-13 by darkstr1746@comcast.net
I sent this out three hours ago and it's still not up on the list. What's up with the Yahoo mail server. Forgive me if this finaly appears twice. Don't mean to waste bandwidth, then again, nothing else has appeared here for so long it probably doesn't matter. oh well These panels
2005-10-13 by darkstr1746@comcast.net
These panels will be for sale for one week only before heading to e-bay later. Not too much interest here anymore and i'm sure it's 'cause cash is so tight now for everyone but i thought i'd put these up for a short period of time out of respect for fellow travelers. I'm not post
2005-10-11 by Les Mizzell
> Les saying that he would gladly take up the slack and get it going if he > had the code and i guess there was some sort of refusal at that point. Offer still stands...... -- ----------- Les Mizzell
2005-10-11 by darkstr1746@comcast.net
The Serge configurator has been down now for. . . what??. . . seven months or so?? Can't remember who has the code for it.. is that you James?? Anyway, is this ever going to happen again? Seems i remember Les saying that he would gladly take up the slack and get it going if he ha
2005-10-08 by Tetsuo
Greetings Sergers, This is my first post to the group. My equipment is all standard jack stuff (2600's, MS-20, Euro and Frac format racks) and have yet to plunge into the world of banana with Serge, Modcan, Fenix, etc.. Someday, I'll hopefully Igo bananas! Until then, I do have a
2005-09-30 by John P
Hi, Tomorrow's the last day I will be putting CD sales to the Red Cross for hurricane relief. Thanks to all who stepped up! http://www.cdbaby.com/mnml, http://www.cdbaby.com/SergeModular Also check out John Duvall's: http://cdbaby.com/cd/duval -- m/n/m/l surreal electronic music,
2005-09-27 by darkstr1746@comcast.net
I can't remember exactly what i paid for my PS12 but for some reason $1200 sticks in my head. That includes all the power caables and the 4 distribution rails. I might have the invoice somewhere but it would take days to find it. This was also before STS moved from Oakland. Call
2005-09-27 by Joe Pavone
Not even listed in the catalog, this would be a PS12 (I think) supply with 4 power cable outputs. Included with PS are 4 main power cables, 4 XLR to Molex power connectors and 2 power distribution board. For picture see: http://homepage.mac.com/jpavone/pics/SERGEPS12.jpg Purchase
2005-09-26 by George Miller
Hi all, can anyone tell me what rating slo-blo fuse goes in my serge power supply ? I got it new from STS in 2001 to power my three panel system. It (the fuse) is a bit stuck in the holder so I can't read the number and don't want to yank at it for fear of breaking it. But I'm go
2005-09-20 by darkstr1746@comcast.net
the sale i had up a few months back is over. All unsold panels and maybe some others are now going to evil-bay. john duval
2005-09-18 by yasi p
>Anyone with any ideas how to get a manually tapped, tempo synced, >clock signal from an analog modular? > >Manual trigger / synced slow rising ramp / SH / VCLFO That'd be the way I'd copy the usual digital implementation. maybe demux the incoming pulses into even and odd, and dr
2005-09-17 by srmaietta
A member of the Blacet list has brought up a desire of his, to be able to tap a tempo into his modular system.. Obviously there are devices to do this, and easier ways then trying to patch it up manually, but the challenge remains. . Is it possible? Barring the PSIM, and any othe
2005-09-09 by sydilaxe
I apologize to the list for wasting bandwidth with my ignorant silliness... Ben
2005-09-09 by sydilaxe
Kevin, I am willing to trade my Modcan pre-amp/envelope follower module (the discontinued original version) plus a smidgen cash for the dual sawtooth animator if you are interested. Ben
2005-09-09 by not known
hi all, please forgive the cross-posting. subject line says it all really... asking $250 shipped for the Pulse Divider asking $350 shipped for the Sawtooth Animator both are in almost-new condition with low hours on them and functioning perfectly. will trade for a 07a Noise/S&H/R
2005-09-07 by turbotron69
HI; For sale Animal panel plus extra module ,dual PSU and set of Pomoma cables. 2450 euros thanks http://groups.yahoo.com/group/gloriagucci
2005-08-31 by John P
All my CD sales thru the end of September will go to the Red Cross for hurricane relief. If you hate my stuff there's other electronics available too.... http://cdbaby.com/group/redcross -- m/n/m/l surreal electronic music, sound, noise http://www.mnmlnoise.com
2005-08-29 by not known
hey folks, for those of you on more than one of these lists, please forgive the cross-post - it's just easier this way ;-) I've created a profile on acidplanet.com to showcase some of the snipets I've made over the past few months using a Fenix, Modcan/Cynthia rig and some FX...
2005-08-23 by Larky Joe
hello all - I'm not looking to sell or buy anything at the moment; just thought i'd post this and let you hear some of my music if youre interested... www.zeljkovision.com/stcherevmin/sdchp.html never posted anything here before. I hope this first one doesn't seem self-indulgent.
2005-08-23 by paradigmshiftbeats
Dennis, I believe Joe Pavone had a panel like this for sale several months ago - you might check with him. Chris --- In SergeModular@yahoogroups.com , "m0n075" wrote: > Wanna buy a soup kitchen or something similar. > Waveshapers Frequency shifters Phasers Delays etc. > > Regards
2005-08-22 by m0n075
Wanna buy a soup kitchen or something similar. Waveshapers Frequency shifters Phasers Delays etc. Regards, Dennis
2005-08-22 by John P
Passing this along to our humble list.... ******************************************************* Robert Moog took his last breath today, August 21, at 2 pm. We will be paying tribute to his life with a Jewish funeral on Tuesday August 23rd at 4 PM and a Memorial Celebration on W
2005-08-17 by John Loffink
The switches on the Ebay sequencer/VCO panel are the standard ones for the early 1980 era, AFAIK. They appear to be the same on a 1979-1983 era university system that I used. The old switches require much more pressure to activate AND have a smaller surface area than current Serg
2005-08-17 by srmaietta
so guys it looks like the exact same panel is on ebay now. 6 PCO's, Triple waveshaper, mixer. except it has only 20 hours to go (on a 7 day auction) Funny, I didnt see it in the last week. No bids. Its at $230 or so right now.. I asked the guy where the panel was and he tells me,
2005-08-17 by darkstr1746@comcast.net
point well taken Peter and i'm not faulting you for it. I was just venting my spleen so to speak not to mention my amazement that these panels went for so much when others on this list including myself have offered newer better panels (argueably) for way less cash and had them go
2005-08-17 by Peter Grenader
Jphn, Shoot me -but my feeling --> it's cool to be cool and list items on a sale first, but if there are no immediate takers, I don't see anything wrong with ebay. What I usually do is announce that 'before this goes for auction' and give it a set period of time, like a week or s
2005-08-17 by Peter Grenader
While it's the worst photo imaginable for detailed analysis, it seems to me the the push buttons on this programmer are the touch switches Serge played around with in the late 70s (last time I saw them). There were a bunch of them laying around at one point, but the only system i
2005-08-17 by darkstr1746@comcast.net
Despite the fact that i have panels for sale. . . . SALE!!!! i thought if i could pick one of these up for cheap it wouldn't hurt. These things are over 25 years old. The programmer panel doesn't even have the LEDs or the scale select switches not to mention the goofy and not sta
2005-08-16 by darkstr1746@comcast.net
So long Blake. You will be sorely missed!! : ( I have two of those customs of yours and they are real gems. One is still up for sale. Take care my friend and heres wishing you much enjoyment with the acoustics instruments. I can relate all too well. take care kind regards john du
2005-08-16 by John P
Congratulations on your new music... good luck with everything... Blake Wilson wrote: > >a lot of folks have asked "why" and he's the simple answer: i've found >instruments and musics that call to me much stronger that electronics >ever did (and boy did electronics reel me in for
2005-08-16 by Blake Wilson
Steve Maietta wrote: > yeah the prices went up and up.... and up.. and up!! > > A full oscillator bank is a rarity I'd guess, and definitely would be > nice for almost anyone.. I would have guessed a high price, but $2600 > (I think thats what it went for) is a bit much... thats
2005-08-16 by synpro@aol.com
In a message dated 8/16/05 10:40:09 AM, SergeModular@yahoogroups.com writes: Message: 2 Date: Tue, 16 Aug 2005 00:59:00 -0000 From: "paradigmshiftbeats" Subject: Re: ebay panels going in 40 minutes!!! Seeing these winning bids for vintage panels, it's just ridiculous that John (a
2005-08-16 by Steve Maietta
yeah the prices went up and up.... and up.. and up!! A full oscillator bank is a rarity I'd guess, and definitely would be nice for almost anyone.. I would have guessed a high price, but $2600 (I think thats what it went for) is a bit much... thats almost new price! and the oscil
2005-08-15 by paradigmshiftbeats
Seeing these winning bids for vintage panels, it's just ridiculous that John (and Blake?) still has panels for sale! Chris
2005-08-15 by srmaietta
Anyone out there need a few oscillators? two panels on ebay.. th auctions end at around 8:30 PM EST Jus thought Id remind you all about them ~Steve
2005-08-15 by don hassler
Agreed, a computer based daw, with maybe a control surface if you need to maintain the physicality of a conventional mixing board seems to be an effective way to go. The digital mixing boards seem to add some extra, and very possibly unneeded learning curves. The debate as to whi
2005-08-15 by Peter Grenader
darkstr1746@... wrote: This question could generate some long winded answers i'm sure ,so just keep responses as non technical as possible. Who here has made the switch from straight up analog desk to a digital desk?. . like the Sony or Yamaha O2R. What were your first impression
2005-08-14 by James Coplin
I went from an analog desk to digital to straight computer i/o . While I don’t miss the digital desk as compared to computer i/o , it was vastly superior to the analog desk. Don’t overlook the Panasonic/Rams DA7. That’s what I ended up with after test driving all the reasonable d
2005-08-14 by darkstr1746@comcast.net
This question could generate some long winded answers i'm sure ,so just keep responses as non technical as possible. Who here has made the switch from straight up analog desk to a digital desk?. . like the Sony or Yamaha O2R. What were your first impressions about the learning cu
2005-08-13 by Dennis Verschoor
I think 500ma should be more then enought to power up a panel. Some panels require +6 volt i think. Regards, Dennis On 8/13/05, srmaietta srmaietta@... > wrote: > (Sorry if this got posted twice!) > > Does anyone know the ratings for the diferent factory power supplies?? > I have
2005-08-13 by srmaietta
(Sorry if this got posted twice!) Does anyone know the ratings for the diferent factory power supplies?? I have a 12v linear lying around and need to know how much juice an average panel draws.. I know that it varies from panel to panel, but whats a safe bet? 500? 750ma? thanks ~
2005-08-09 by darkstr1746@comcast.net
yup... i stand corrected. Just spoke with the owner of these panels and they are from around the time that Rex took over. kind regards john -------------- Original message -------------- That style of rack ear and VCO Freq knob were standard for early 1980s Serge panels, which is
2005-08-09 by John Loffink
That style of rack ear and VCO Freq knob were standard for early 1980s Serge panels, which is the era these appear to be from. For example, check out this university system on Egres: http://www.serge-fans.com/gallery_20.html John Loffink The Microtonal Synthesis Web Site http://w
2005-08-09 by darkstr1746@comcast.net
heads up all. Note the non STS rack ears and enclosures and non standare Freq knobs on the Osc. kind regards john duval -------------- Original message -------------- Not mine. Ebay item numbers: 7342297982 7342298747 Oscillators galore!
2005-08-09 by paradigmshiftbeats
Not mine. Ebay item numbers: 7342297982 7342298747 Oscillators galore!
2005-08-08 by Jan-Hinnerk Helms
I received lots of good advice from John and Chris (and the list) on putting my second panel together, thanks again on this occasion! Some words where this advice might lead… I started with a used Animal, as I could not afford anything more expensive, and I wanted to get the [TKB
2005-08-08 by darkstr1746@comcast.net
Chris has indeed stepped to the plate with a lengthy and informative outlook on panel configurations. Thanks Chris!! john duval -------------- Original message -------------- --- In SergeModular@yahoogroups.com, darkstr1746@c... wrote: > if even half the owners of systems would b