P3 construction
2005-05-16 by colinfraser_com
Folks, I've finally started getting the P3 construction pages updated... http://www.p3sequencer.com/build/index.htm More to follow soon. Cheers, Colin f
Messages
Browse messages
Page 100 of 168 · 8362 messages matched
RE: [analogue-sequencer] Re: Serial numbers
2005-05-16 by Colin f
> ah. "A073" won't even be doing that unless I update it, right? it's in > a flightcase in a cupboard in a rehearsal studio in stockport..... > would I ever, d'y'suppose, be able to use a yamaha datafiler to update > it? I tried this once (it renders the sysex as a *.mid file whi
Re: Serial numbers
2005-05-16 by ferrograph632
>You may notice that the current P3 firmware displays '#????' on startup, where ???? are odd characters.
bigging up the p3 on looper's again
2005-05-16 by ferrograph632
chaps- >>this is as near as I've seen/used to a "midi-looper"; I have two of these now, & would not be parted from them: http://www.sequentix.com/ in one of it's three "live-record" modes, it can loop-record a monophonic keyboard line.... not very exciting, you might think, but y
sysex
2005-05-16 by blixton
Is it possible to record knob movements from my mks-80 to the p3? It sends sysex data I think.
RE: [analogue-sequencer] Serial numbers
2005-05-16 by Colin f
> No, no... your P3 would say 'Buy more modules... buy more modules...' > repeatedly. If you remember Tony, I already put in the 'Buy Oakley Modules' subliminal message in pattern edit mode, in return for the mention on your web site. Cheers, Colin f
Re: [analogue-sequencer] Serial numbers
2005-05-16 by Oakley Sound
> I'd find it reassuring as it would probably mean one of my synths was > going to get fixed.... But also implying that one of them was about to break down. Tony :-)
Re: [analogue-sequencer] Serial numbers
2005-05-16 by Oakley Sound
> I think I'd find it vaguely annoying if mine said 'Hello Tony' when I powered it up ;->) No, no... your P3 would say 'Buy more modules... buy more modules...' repeatedly. Tony :-)
Re: [analogue-sequencer] Serial numbers
2005-05-16 by Paul Nagle
On Mon, 16 May 2005 17:05:41 +0100, "Andy Wilson" wrote: >On 16 May 2005 at 16:47, Oakley Sound wrote: > >> I'd like it to say 'Hello Tony' when I powered it up... > >I think I'd find it vaguely annoying if mine said 'Hello Tony' when I >powered it up ;->) I'd find it reassuring
Re: [analogue-sequencer] Serial numbers
2005-05-16 by Andy Wilson
On 16 May 2005 at 16:47, Oakley Sound wrote: > I'd like it to say 'Hello Tony' when I powered it up... I think I'd find it vaguely annoying if mine said 'Hello Tony' when I powered it up ;->) Andy --- Andy Wilson http://www.techman.synth.net andy@techman.synth.net
Re: [analogue-sequencer] Serial numbers
2005-05-16 by Oakley Sound
I'd like it to say 'Hello Tony' when I powered it up... Tony :-)
RE: [analogue-sequencer] Serial numbers
2005-05-16 by Colin f
> Yeah, I did wonder.. Mine briefly displays #0000, and AFAIR there is > an 18 in there somewhere. Wasn't paying much attention. The 18 refers to the processor speed. This value is used to calculate timer values for tempo generation. Newer CPUs have a 24 MHZ crystal, and are code
RE: [analogue-sequencer] Serial numbers
2005-05-16 by Andy Wilson
On 16 May 2005 at 16:12, Colin f wrote: > ready-built, #K007 for a kit. Oohh that's my serial number :->) Andy --- Andy Wilson http://www.techman.synth.net andy@techman.synth.net
Re: [analogue-sequencer] Serial numbers
2005-05-16 by Andy Wilson
Hi Colin, On 16 May 2005 at 14:47, colinfraser_com wrote: > Folks, > > You may notice that the current P3 firmware displays '#????' on > startup, where ???? are odd characters. Yeah, I did wonder.. Mine briefly displays #0000, and AFAIR there is an 18 in there somewhere. Wasn't p
RE: [analogue-sequencer] Serial numbers
2005-05-16 by Colin f
> >You may notice that the current P3 firmware displays '#????' on > >startup, where ???? are odd characters. > It doesn't bother me at all - in fact I think it's a nice > distinction from > what will be your assembled offerings (which I assume will > have S/N's?)! All CPUs are n
RE: [analogue-sequencer] Please help - sick P3?
2005-05-16 by implode7@comcast.net
> Hi Gene, > > > ok - well, I'm pretty sure that I what happened was that I > > loaded the 3.0 > > bootloader a couple of months ago, and then loaded this one. > > Ah, that would mean the new bootloader was loaded as if it were a main > program - so your bootloader will still be
Re: [analogue-sequencer] Serial numbers
2005-05-16 by Mark Pulver
colinfraser_com (07:47 AM 5/16/2005) wrote: >Folks, > >You may notice that the current P3 firmware displays '#????' on >startup, where ???? are odd characters. >... >Since I'm so busy at the moment, I thought I'd just check if anyone >is actually bothered about this first... ? It
RE: [analogue-sequencer] Please help - sick P3?
2005-05-16 by Colin f
Hi Gene, > ok - well, I'm pretty sure that I what happened was that I > loaded the 3.0 > bootloader a couple of months ago, and then loaded this one. Ah, that would mean the new bootloader was loaded as if it were a main program - so your bootloader will still be the old version.
P3s in the USA
2005-05-16 by synthtrader
hello, Colin Fraser sent over some P3s earlier this month which pretty much sold out immediately. We do have one left that we put aside (din sync version) but if somebody wants it just go to our site and fill out the online order form: http://www.analoguehaven.com/sequentix/p3/ W
RE: [analogue-sequencer] Please help - sick P3?
2005-05-16 by Gene Schwartz
"Then I got the official sysex ID so I released a sysex ID patch for bootloaders that had already been upgraded to 3.0, and replaced the 3.0 bootloader with the 3.1 bootloader update. 3.1 included the new sysex ID, so it was only a 1 step update for those who hadn't already appli
Serial numbers
2005-05-16 by colinfraser_com
Folks, You may notice that the current P3 firmware displays '#????' on startup, where ???? are odd characters. The new CPUs are all written with their serial numbers in the flash, and display it on boot as #1234 or whatever. I was thinking of releasing a utility that could be loa
RE: [analogue-sequencer] Please help - sick P3?
2005-05-16 by Colin f
Hi Gene, > I'm confused now. Wasn't there a bootloader update a few > months ago, and > this is the second one? There was a bootloader update T89-3.0, which modified the bootloader so the same main program would run on both old and new CPUs. The new CPU needs to have the bootload
RE: [analogue-sequencer] Please help - sick P3?
2005-05-15 by Gene Schwartz
-----Original Message----- From: analogue-sequencer@yahoogroups.com [mailto:analogue-sequencer@yahoogroups.com]On Behalf Of Colin f Sent: Sunday, May 15, 2005 3:15 PM To: analogue-sequencer@yahoogroups.com Subject: RE: [analogue-sequencer] Please help - sick P3? Hi Gene, > let me
RE: [analogue-sequencer] Please help - sick P3?
2005-05-15 by Colin f
Hi Gene, > let me try this again - after I boot up the p3 with func/page > selected, and > choose flash, then I use p3tools to upload the bootloader. It > tells me that > there were 14 tried on its screen, and the p3 saves size 0680 > chk2F31. > When > I choose boot, though, it j
RE: [analogue-sequencer] Please help - sick P3?
2005-05-15 by Gene Schwartz
> For instance, when I use the firmware upload it tells > me that the > upload failed, and when I simply upload the .syx file it > tells me that there > were 14 errors. Could I have sent corrupted data? "I'm not sure what you're doing there... You can only use firmware upload on
RE: [analogue-sequencer] Please help - sick P3?
2005-05-15 by Colin f
Hi Gene, > > I sent the Bootloader 3.1 - T89 version. > > > > Everything seemed fine at first - I got the > > size0680 chk2F31 > > boot flash OK, this means you have got the latest bootloader installed. > "What happens if you hold FUNC+PAGE when you power on ? > Does it go into t
RE: [analogue-sequencer] Auto save edits/Revised playlist edit mode
2005-05-15 by Colin f
> With "Auto save edits" set to on, is there a way to leave > pattern edit mode > without saving? I was thinking about that one... There is presently no way to abort the edit, and also no way to do a 'save to', so I'll need to decide on a way to allow temporary defeat of the auto
RE: [analogue-sequencer] Re: How does P3 perform LIVE?
2005-05-15 by Colin f
> I've been reading thru the manuals of the P3 and one little question > that pops into my mind: to what extend can you use external > controller to control the P3? To switch patterns? To Modify > accumulators and auxes? ...? The simple answer to that is none yet, but it's on the
RE: [analogue-sequencer] Please help - sick P3?
2005-05-15 by Gene Schwartz
> Ok - I figured that either I'm just forgetting some basic stuff here > (possible) or maybe I should reload the p3 software in case > something is a > bit scrambled. So, I thought that for the latest version you needed to > install the bootloader. I sent the Bootloader 3.1 - T89
Auto save edits/Revised playlist edit mode
2005-05-15 by Jesper Jensen
The new playlist edit mode is a major improvement! I find it much easier to use. Also, the new mixer is a great feature. With "Auto save edits" set to on, is there a way to leave pattern edit mode without saving? Btw. the Cubase sync (unstable midi clock) problems I was having, d
RE: [analogue-sequencer] Please help - sick P3?
2005-05-15 by Colin f
Hi Gene, > I couldn't figure out why, after initializing a bank, that > occasionally all > of the default patterns would reset themselves. I didn't see > a reason for > it - there were no constructed playlists - they just listed > pattern 1 - but > after working with the bank for
Re: How does P3 perform LIVE?
2005-05-15 by sahkopostiosoite
Thank you for you r kind reply Colin, I've been reading thru the manuals of the P3 and one little question that pops into my mind: to what extend can you use external controller to control the P3? To switch patterns? To Modify accumulators and auxes? ...? Thanks for yor patience
Please help - sick P3?
2005-05-15 by Gene Schwartz
This very well might be user error - the last few months I've spent playing with software mostly, having just discovered the world of Windows vst synths... But I booted up the p3 yesterday to start working with it again. Now, I have probably forgotten some of the workings of the
RE: [analogue-sequencer] How does P3 perform LIVE?
2005-05-15 by Colin f
sahkopostiosoite wrote: > I would have wanted to ask the mailinglist member how have they found > the P3 to fuction in live situations. Does the P3 carry the emphasis > on repetitive or preprogrammed stucture in a song, or is one able to > change the course of the song even if it
New file uploaded to analogue-sequencer
2005-05-15 by analogue-sequencer@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the analogue-sequencer group. File : /P3UserGuide.pdf Uploaded by : arglebargleuk Description : P3 User Guide version 1.01 You can access this file at the URL: http://gr
Re: [analogue-sequencer] How does P3 perform LIVE?
2005-05-14 by blixton
are people using the p3 with samplers? Do you suggest using it w/ a sampler? How are they being used w/ samplers?
How does P3 perform LIVE?
2005-05-14 by sahkopostiosoite
Hello dear all, I have just joined the list as I'm intriqued by all the possibilities offered by the P3 seq. I'm very interested in getting myself one P3 for live use. I have been useing a lot of Ableton Live (on a laptop that is) as it has some features that are very suitable fo
RE: [analogue-sequencer] PLED displays in stock @ Crystalfontz..
2005-05-14 by Colin f
> Anyone know if these things are available in red yet???????? They were announced as 'coming soon' in red quite a while ago, but there seems to have been some production problems... I think I'd prefer green though. Cheers, Colin f
RE: [analogue-sequencer] P3 US momentary button source.. ?
2005-05-14 by Colin f
Steve, > Does anyone have a part# for a nice switch to use under Colin's > keycaps. . available in the US? The switches that go under the keycaps are included with the keys & caps option you ordered. You just need to supply two circular tact switches for the upper and step key mo
P3 US momentary button source.. ?
2005-05-13 by srmaietta
Does anyone have a part# for a nice switch to use under Colin's keycaps. . available in the US? thanks ~Steve
PLED displays in stock @ Crystalfontz..
2005-05-13 by srmaietta
All, I just recieved my PLED display from crystalfontz a day ago.. they're back in stock and the price is right. Anyone know if these things are available in red yet???????? thanks, happy sequencing. ~Steve
RE: [analogue-sequencer] Parts supplier in Canada?
2005-05-12 by Paul Reinis
> The US BOM would be very helpful - the reason the companies I > contacted haven't > returned my email is probably because I sent them the UK bom. More likely because they can't be bothered. > Colin, would it be possible for you to update that US bom? > Or, at least tell us > wh
RE: [analogue-sequencer] Parts supplier in Canada?
2005-05-12 by Colin f
> The US BOM would be very helpful - the reason the companies I > contacted haven't > returned my email is probably because I sent them the UK bom. More likely because they can't be bothered. > Colin, would it be possible for you to update that US bom? > Or, at least tell us > wh
RE: [analogue-sequencer] Parts supplier in Canada?
2005-05-12 by Paul Reinis
Hi, Thanks for a great answer! So it appears that I shouldn't have too much problem getting everything I need within north america. Yes, I would like to buy your memory chips, if you don't need them! (gives me a chance to return your favour by taking them off your hands and saves
RE: [analogue-sequencer] Parts supplier in Canada?
2005-05-12 by bleep
On Thu, 12 May 2005, Colin f wrote: > The US BoM is in the Archive folder. > It's a little bit out of date for the new revision boards. that is true... colin, could you send me a list of what has changed and what has been added? that will help me get the updated version up a LOT
RE: [analogue-sequencer] Parts supplier in Canada?
2005-05-12 by Colin f
> also, there *was* a US BOM that I had posted awhile ago... it > appears to > be gone now, though. I should make another one and upload it. > I'm really > short on time for that sort of thing these days tho... The US BoM is in the Archive folder. It's a little bit out of date fo
Re: [analogue-sequencer] Parts supplier in Canada?
2005-05-12 by bleep
On Thu, 12 May 2005, Paul Reinis wrote: > Does anyone know of any distributors in North America (pref. Canada) that stock > ALL of the parts in the BOM? most parts? well, no one stocks *all* of them. you can get most from mouser, though (www.mouser.com). if you go the PLED route
Parts supplier in Canada?
2005-05-12 by Paul Reinis
Hi group, I'm seriously considering building myself a P3. At this point, I'm just trying to confirm that all the parts are going to be available for a reasonable price and in a reasonable amount of time. I've contacted a few electronic parts suppliers near Toronto, Canada, where
Linux prog
2005-05-12 by Tom Adam
What linux prog do you guys use for sysex stuff? Thanx, Tom
Tip: variable spaces (using playlists)
2005-05-10 by Paul Nagle
Here's one you might like: Create two patterns - one of them a simple 4-step sequence playing any 4 notes you like. For the second pattern, don't enter any notes; instead set two auxilliaries as follows: Row A "offset Aux D rel" and enable the first step with any value you like.