Re: [emax] Re: hd formating question
2008-02-05 by ted Summers
Some hard drives had a jumper to make them appear no larger than 520MB, so you might need to look up manufacture site in their archives for the drive and
Messages
Browse messages
Page 154 of 236 · 11758 messages matched
Re: Emax Service Manual
2008-02-04 by Tristan Upton
I am interested in the Emax-II service manual too :) Regards, Tristan
Re: Emax Service Manual
2008-02-04 by esynthesist
Sounds great Rob. By the way: do you also have them for Emax-II ??
Re: hd formating question
2008-02-04 by esynthesist
It might be impossible to do that because 2GB drives are post-Emax area. But here s just an idea, you never know: Have you tried to create an empty Emax-II
hd formating question
2008-02-04 by gadgetfiddler
Is there a way to partition a 2gb hd so that emax II with format only 540mb or so? I don t mind wasting the unused harddrive space, it would be well worth it
SV: Re: [emax] Emax Service Manual
2008-02-04 by Brian Ronn
Hi Rob Long time no heard :-) I read your post on the Emax Yahoo group regarding the Emax service manual. Please include me when sending the pdf manual via
Re: [emax] Emax Service Manual
2008-02-03 by Roland S-50
Hi Rob, Any chance of posting the PDF to the files section of the group? Cheers, Mike. ... [Non-text portions of this message have been removed]
Emax Service Manual
2008-02-03 by emuarc2
Hi Emaxers, PDF copies of the E-mu Systems Emax Service Manual complete with schematis, theory of operation and diagnostiocs are now available. Contact me off
Choir Sounds anyone?
2008-02-03 by wintermute0815
Hi, I m new to this forum. I recently found this on youtube and wonder if anyone can help me. http://www.youtube.com/watch?v=-_al6wn9fcA I m searching these
Re: EMX file to floppy using EMXP and OmniFlop
2008-02-01 by esynthesist
True, that s why I will add an explicit warning message in EMXP. On the other hand, there s almost no installation procedure except for the licensing which is
Re: [emax] Re: EMX file to floppy using EMXP and OmniFlop
2008-01-31 by Roland S-50
Hi there, I think part of the problem is that it s not very clear that EMXP needs to be specifically licensed for use with OmniFlop. I think it s caused by the
Re: EMX file to floppy using EMXP and OmniFlop
2008-01-31 by csmealer
OK, thanks for the answer and sorry to upset you. I just joined this group (yesterday) and have never used a Yahoo group before, so I m still figuring out how
Re: EMX file to floppy using EMXP and OmniFlop
2008-01-31 by esynthesist
You should license OmniFlop for use with EMXP explicitly, as (a) explained in the manual of EMXP (b) explained only three weeks ago in message
Re: EMX file to floppy using EMXP and OmniFlop
2008-01-31 by csmealer
It s an internal drive. ... external usb ... using EMXP ... section ... I ... it. I ... but ... Errorcode
Re: [emax] EMX file to floppy using EMXP and OmniFlop
2008-01-31 by Brooks Mosher
are you using an internal floppy drive? it won t work with an external usb or the like... ... [Non-text portions of this message have been removed]
EMX file to floppy using EMXP and OmniFlop
2008-01-31 by csmealer
Can someone tell me how to write an EMX.1 image to a floppy using EMXP and OmniFlop? I m trying to drop the 808 file in the Files section of this group onto
Emax 1 Rack
2008-01-31 by Matt Avery
hello there everyone, Im looking for an emax 1 rack. Anyone got one for sale ? Thanks, Matt. _________________________________________________________________
Re: [emax] Emax parts for sale?
2008-01-30 by Alan Currall
Hi Jesse, Is it an Emax I or Emax II? Also is it a keyboard or rack version? I don t know whether it makes any difference, but if it ll work with my Emax I
Re: Service Manual - or help :-)
2008-01-29 by saerling
Thanks Ted. I found the WD1772 chip on one of my working Emax and I exchanged it with the one on the non-working Emax - but still no luck. It s behaving really
Emax parts for sale?
2008-01-29 by misemerjesse
I have an Emax that has two channels with distortion. I have to disable in the master section.I think it has two ssm2047 going bad so I am parting out the
Re: [emax] Service Manual - or help :-)
2008-01-28 by ted Summers
The Floppy controller were used by Atari also, and is available from some atari repair shops. search for atari and wdc1772 I think it is.... regards, Ted
Service Manual - or help :-)
2008-01-28 by saerling
Hi guys. I am trying to fix this old Emax SE Plus sampler I just got, but there seems to be a problem with the access to the floppy drive. The problem is NOT
Emax Diagnostics issue.
2008-01-25 by saerling
Hi guys. I just bought an old Emax SE Plus sampler (my third Emax), but everytime I turn it on the LCD reads Emax Diagnostics nomatter if there s a disk in
Re: high pitched whine
2008-01-25 by Mike
Hi Alan, It sounds like you ve either got a dodgy connection (on the 2x7-pin IDC pin connector for the LCD assembly), or you ve moved the thin rubber connector
Re: Emax floppy and sd flash drive
2008-01-25 by ted Summers
Kurt- If you don t have SCSI, you won t be able to use any kind of SD or CF or anything like that. Group---- As to the Slim floppy- I haven t had any luck with
RE: [emax] Re: high pitched whine
2008-01-25 by Jonathon Stevens
i ve been having a problem with my display too. No whine, but occasionally it appears to offset all the information displayed in the screen to the left.
Re: high pitched whine
2008-01-24 by alancurrall
Uh oh! I tried the bits of cardboard wedged behind the LCD as suggested, following the instructions on the Emulatorarchive site. I even disconnected the LCD
Emax presets for Ensoniq ASR-10 users
2008-01-19 by Chip
Hi, I ve translated some presets of my Emax for using in the Ensoniq ASR-10. All the settings was made manually in each voice, and i ve dumped the voices to
Emax SCSI upgrade on a rev 2 CPU board?
2008-01-15 by Mike
Hi, My machine has a revision 2 motherboard, which already has more than enough chopped tracks and patch wires (is that how they come from the factory?!?). It
Re: high pitched whine
2008-01-15 by Mike
Hi Alan, Sounds like (no pun intended!) the voltage inverter/drive for the LCD backlight, or the EL backlight itself. You ll have to take the machine apart to
Re: Downsizing. Would like to donate to a worthy cause for someone to P/U in Se
2008-01-15 by Mike
Hi there, I ve been after a SCSI kit for my Emax and I think the only way to get one would be to cannibalise your motherboard! Would you be willing to send it
Re: Downsizing. Would like to donate to a worthy cause for someone to P/U in Se
2008-01-15 by Mike
Hi, Any chance whoever gets the disks can convert them to .EM1 disk images? Cheers, Mike.
RTF Re: [emax] New file uploaded to emax
2008-01-14 by Bob Conner
http://en.wikipedia.org/wiki/Rich_Text_Format ... http://groups.yahoo.com/group/emax/files/Emax%20Disk%20Index.zip ...
Re: [emax] New file uploaded to emax
2008-01-14 by Brooks Mosher
sorry for my ignorance, what s RTF format? ... [Non-text portions of this message have been removed]
Emax in Argentina
2008-01-14 by Chip
Anybody selling an Emax 1 Keyboard near Argentina? mail me: xtr909x@msn.com cheers chip
Article on E-mu SP-1200 in Village vocie
2008-01-14 by Eduardo Saponara
http://www.villagevoice.com/music/0746,detrick,78335,22.html _________________________________________________________________ Make distant family not so
Downsizing. Would like to donate to a worthy cause for someone to P/U in Sequim
2008-01-14 by desotomusic
1 ea. EMAX Digital Sampling Keyboard w/ KMD stand Model 1000 Ser. # 32790487 Presently not working. Possibly hard drive corrupt. All that happends when I
[emax] high pitched whine
2008-01-14 by Captain Dan
Alan. I had this problem as well. It was caused by some sort of vibration in the LCD. I don t recall the exact steps, but I eventually put a thin slice of
Re: [emax] high pitched whine
2008-01-14 by lyn oakey
Try here - look under repairs. http://www.emulatorarchive.com/Samplers/Emax2Overview/Emax2Upgrades/emax2upgrades.html ... From: alancurrall To:
Re: [emax] high pitched whine
2008-01-14 by Alan Currall
Thanks -s*, I ve just replaced the power supply - what an adventure that was, they may be out there but they re not so easy to track down - so I know this
Re: [emax] high pitched whine
2008-01-14 by lyn oakey
Seem to remember some Emax s had a problem with the backlight There might be reference to it on the Emulator Archive site. hope that helps Lyn ... From:
Re: [emax] high pitched whine
2008-01-14 by s*
From my experience, your power supply may be going. Try opening the unit up and check to see if the capacitors are bulging on the power supply. My EmaxSE did
high pitched whine
2008-01-14 by alancurrall
Hi Emax Boffins, Ever since a got my Emax it s produced a high pitch background noise while it s on. This doesn t come through the audio outputs, so doesn t
New file uploaded to emax
2008-01-14 by emax@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the emax group. File : /Emax Disk
EMAX 1000
2008-01-14 by Tom Flanik
To all: Attached is a list of my assets which I am willing to give/donate to a good cause. I have not tried to repair the keyboard. Don t have time. Don t
Re: [emax] Emax and Compact Flash -Please read it all if you want to do this!!!!!
2008-01-12 by ted Summers
Mike- I hear that- it took me a couple of years before I got mine done. Of course, I was not looking very hard either..... Is Rob from Emu Archive out
Re: [emax] Emax and Compact Flash -Please read it all if you want to do this!!!!!
2008-01-12 by Roland S-50
Hi Ted, I d give this a go in a flash, but unfortunately I need the SCSI kit for my Emax first! Cheers, Mike. ... [Non-text portions of this message have been
Re: [emax] Emax and Compact Flash -Please read it all if you want to do this!!!!!
2008-01-12 by ted Summers
Kurt- Mine works- All items I have previously linked to for purchase work, as I have a set, and have done the following: Hooked up the chain of parts. wrote OS
Re: [emax] Emax and Compact Flash -Please read it all if you want to do this!!!!!
2008-01-12 by kurt anders
Hi Ted. I am definately looking at doing this. Thanks and I hope it all works. Kurt ted Summers wrote: Great news- I have
Re: [emax] Emax and Compact Flash -Please read it all if you want to do this!!!!!
2008-01-12 by ted Summers
Great news- I have contacted the ebay seller about the drives. He pulled the remaining items due to a concern that all the drives may not be the same. Some