Yahoo Groups archive
Messages
Page 109 of 564 · 28179 messages matched
2011-08-01 by NetPierre
I didn't know either what to expect of an Analog Shift Register, but i did find some interesting info online here: http://hardsync.blogspot.com/2009/03/brief-history-of-analog-shift-registers.html Wikipedia does also provide some extra theory. http://en.wikipedia.org/wiki/Shift_r
2011-08-01 by david.salter@thomsonreuters.com
I have an M23 module and it's simple but very effective. I'd love another ASR. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * David Salter Senior Consultant Solutions Services EMEA North Thomson Reuters O +44 (0)20 7542 2402X 52402 M 07990562402 dav
2011-07-31 by York Luethje
http://www.muffwiggler.com/forum/viewtopic.php?t=5124 &postdays=0&postorder=asc&start=75 http://www.muffwiggler.com/forum/viewtopic.php?t=5291 &postdays=0&postorder=asc&start=135 http://muffwiggler.com/forum/viewtopic.php?t=3906 &postdays=0&postorder=asc&start=690&sid=4b521925a0f
2011-07-31 by Martin Klang
ok cheers - I'm new here, thanks for the heads up! /m On 31 Jul 2011, at 19:13, Richard Scott wrote: > the Plan B is already a copy of a Serge design, no? > > its great: the only issue with it is that the company is no longer in > business and even if it was a lot of people won't
2011-07-31 by Bakis Sirros
...shiftfest...? :D Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Worlds/192093934136476 www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusi
2011-07-31 by Richard Scott
the Plan B is already a copy of a Serge design, no? its great: the only issue with it is that the company is no longer in business and even if it was a lot of people won't buy from them because of unreliable quality control and delivery issues. But Bakis has asked us not to try t
2011-07-31 by Martin Klang
what are the issues with the Plan B ASR? cheers, /m On 31 Jul 2011, at 16:27, synovatron wrote: > Has anyone an idea of what the specification should be? What features are required? I guess something with at least what the Plan B Model 23 can do would be good. Just a copy, even t
2011-07-31 by Bakis Sirros
i guess a 3-step ASR would be fine, IMHO! but i am sure, when Dieter starts to work on this, he will fine little extras to add to the standard 'theme'.... :-) Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music.
2011-07-31 by synovatron
Has anyone an idea of what the specification should be? What features are required? I guess something with at least what the Plan B Model 23 can do would be good. Just a copy, even though there are 'issues' with Plan B, I think would not be the right thing to do, and I guess Diet
2011-07-31 by achtung_999
Thanks for putting it up Bakis! Curious what Dieter will say. On Sun, Jul 31, 2011 at 1:35 AM, Bakis Sirros wrote: > ** > > > ok, will create one soon! > > > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist > > [Doepfer_a100] group owner > > www. parallel - worlds -
2011-07-30 by Bakis Sirros
hi list, a new poll is up regarding a Doepfer Analogue Shift Register module. please take a few seconds and vote. the poll will be open for exactly 1 month (will close on the 31st of August) thanks, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a1
2011-07-30 by Bakis Sirros
ok, will create one soon! Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Worlds/192093934136476 www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnect
2011-07-30 by achtung_999
Poll? ;-) On Sun, Jul 31, 2011 at 1:28 AM, Bakis Sirros wrote: > ** > > > definitely agree! > > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist > > [Doepfer_a100] group owner > > www. parallel - worlds - music. com > > www. facebook. com/ pages/Parallel-Worlds/1920
2011-07-30 by Bakis Sirros
definitely agree! Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Worlds/192093934136476 www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic
2011-07-30 by achtung_999
Okay, It has been a while again, so I'll bring it up again. I believe it is time for a Doepfer analogue shift register. Plan B is not sold by any dealer anymore and most people are too scared to deal with mr. Grenader himself. No signs of life on the Plan B/Ear website for ages..
2011-07-30 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: Would you want and buy a Doepfer Analogue Shift Register module? o Yes! o maybe... o no. To vote, please visit the following web page: http://groups.yahoo.com/group/Doepfer_a100/surveys?id=13094690 Not
2011-07-30 by jesus
OK, yes, I'm freaking crazy, but I need to sell it fast. Down to $2500 plus s/h. Same contact.
2011-07-29 by Florian Anwander
Hello Malcom I don't have Logic here on the computer I am sitting at, but telling from memory it should work like this: In Logic you have the clock symbol in the transport window. Click on it (or in context menu with right mouse click). There you will find a button which leads to
2011-07-29 by malcolm
Hello All, Just bought a Dark Time and am new to hardware sequencing. Could someone kindly walk me through how to sync the Dark Time to Logic with Logic as the master, using USB. I want Logic to set the tempo. I've checked out the Logic manual but there's something I'm not gettin
2011-07-28 by jesus
Sorry for polluting the airwaves. Got this mint-shaped Cwejman S1 Mk II that I regretfully need to part with. Want $3000 plus s/h. Reluctantly, I might be willing to ship to Europe. Contact me at gretchenDOTlipkeATcomcastDOTnet Thanks. JDiaz
2011-07-27 by Florian Anwander
Hello Andras The input option from Ray is not bad, but maybe a little overkill. I think, two simple transistor buffers (one for clock, one for start/stop-Gate) should be enough: BC549, 47k from MSY out to base, collector to +12V, emitter via 10k to ground, emitter via 1k to seque
2011-07-27 by Andras Hargitai
hello, i am pretty new to this place, so let me introduce myself. i am from hungary, and have always been keen on electronic music. we have started a project to put together a MFOS 16 step sequencer, which some of you might know well. my intention is to SYNC my daw with the seque
2011-07-26 by Andrew Eisele
I'm letting my MAQ go, sad to say, but I'm in a financial bind. Looking to get $800, which includes shipping. Thanks, Andrew
2011-07-25 by yahoo@doepfer.de
> Success! I solder-tacked a little wire as you said on the unit > that didn't have the solder blob, and it works! Thanks again. > > No, I don't suspect that the modules left Doepfer in that > condition -- it might have been something that happened with the > U.S. distributor at
2011-07-25 by yahoo@doepfer.de
> Anybody else had a 2000µF capacitor in a beauty case explode? > > I replaced one for a friend a couple of years ago and last night > one went pop in my own beauty case - lots of smoke. Another is > bulging a bit at the top. > > I'm using homemade modules - nothing too fancy, ju
2011-07-24 by James Husted
Both my A-140 have a true header/jumpers in the upper left corner marked INT.GATE J1. When the jumper is installed the A-140 connects to the bus. If yours does not have the header then a wire soldered across the 2 pads should work. There is not current enough to make a short big
2011-07-24 by E Karel
Success! I solder-tacked a little wire as you said on the unit that didn't have the solder blob, and it works! Thanks again. No, I don't suspect that the modules left Doepfer in that condition -- it might have been something that happened with the U.S. distributor at that time, D
2011-07-24 by James Husted
Another thing to consider is that there should be NO other CV or Gate producing modules connected to the CV and Gate busses - Only ONE Gate or CV creator at a time connected to the bus. As mentioned there should be an A-100BC cable connecting the two bus boards together to make t
2011-07-24 by E Karel
Thanks, James, that was it! Even though I've had this A-111 for about 13 years now, and bought it new, the jumper wasn't there. I added a jumper and now it reads the bus. I took a look at my two (also 13-year-old) A-140s to see if there was a similar jumper, since those also aren
2011-07-24 by E Karel
Hi, Thanks. But the jumper is in the correct position, and I was unclear: I'm trying to use it to send voltage to an A-111 (and the 164-1 to send gate to the A-140, both of which are on a different bus). The A-185-2 and A-111 are on the same row/bus in a A-100P6 suitcase, but the
2011-07-24 by synovatron
Hi Ernst, The A-185-2 has a jumper J5 which needs to have the link connecting the two lower pins to get CV out to the bus. The A-185-2, unlike the A-185 does not have a gate bus connection so the A-140 will not get triggered. Also if you have multiple bus boards you will need to
2011-07-24 by E Karel
Hello list, I just bought an A-185-2 precision adder and an A-164-1 manual gate, but neither one seems to be sending signals to the bus. I have an A-111 on the same bus as the 185-2 in a Doepfer suitcase, and an A-140 on the same bus in a Base Case, but neither one of them is res
2011-07-24 by E Karel
Hello, I just bought a 164-1 and a 174-1 specifically to use together with a 148 S&H, and now find that it doesn't work, and this old conversation. I have both an older and a new A-148, and it doesn't work on either; on the newer one, it works in T&H mode as described below. Whic
2011-07-23 by synovatron
Hi Sean, You are right, drawing more current will more likely affect series devices like diodes and regulators. In the case of the reservoir caps maybe the voltage rating is inadequate - what voltage are the capacitors? Maybe replace with the next higher voltage! Cheers Tony ---
2011-07-23 by sean_process
Anybody else had a 2000µF capacitor in a beauty case explode? I replaced one for a friend a couple of years ago and last night one went pop in my own beauty case - lots of smoke. Another is bulging a bit at the top. I'm using homemade modules - nothing too fancy, just a passive r
2011-07-20 by selfoscillate
> We are also working on a "real" voltage controlled gate delay module, i.e. > the complete gate signal (rising and falling edge) is delayed. A bit like an > audio delay but for gate signals. And as an option we think about an > independend delay time for the rising and falling e
2011-07-20 by Florian Anwander
Am 20.07.2011 10:30, schrieb Bakis Sirros: > use the inverted gate out of the a142 and then pass it thru an a165 trigger modifier for trigger inversion? In any case a A-165 would convert the rising and the falling slope of a Gate into single triggers. You do not have to use the i
2011-07-20 by yahoo@doepfer.de
> Hi Dieter > > Am 20.07.2011 09:57, schrieb yahoo@doepfer.de: > How about the A-142 ? It can be used as a voltage controlled > trigger delay. > How? Ok, it provides a voltage controlled gate length. But trigger > delay? The inverted out would provide always a gate with length un
2011-07-20 by Bakis Sirros
use the inverted gate out of the a142 and then pass it thru an a165 trigger modifier for trigger inversion? Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Worlds/1920
2011-07-20 by Bakis Sirros
that's what i would suggest too! :-) Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. facebook. com/ pages/Parallel-Worlds/192093934136476 www. myspace. com/ parallelworldsmusic www. myspace. com/ i
2011-07-20 by Bakis Sirros
hi list, FS: (all in fine condition! with power cables and screws) Roland System 100m 112 Dual VCO module (price 390 euros) 130 Dual VCA module (price 280 euros) 150 S/H, LFO, Ringmod, noise module (Price 340 euros) (only minor 'problem' the led of the clock of the SH section of
2011-07-20 by Florian Anwander
Hi Dieter Am 20.07.2011 09:57, schrieb yahoo@doepfer.de: How about the A-142 ? It can be used as a voltage controlled trigger delay. How? Ok, it provides a voltage controlled gate length. But trigger delay? The inverted out would provide always a gate with length until the next s
2011-07-20 by yahoo@doepfer.de
> One A-162 Dual Trigger Delay? > i think that, but i dont know can be controled by CV? > > Cheers How about the A-142 ? It can be used as a voltage controlled trigger delay. Best wishes Dieter Doepfer
2011-07-20 by Florian Anwander
Am 20.07.2011 08:07, schrieb aletropdj: > One A-162 Dual Trigger Delay? > i think that, but i dont know can be controled by CV? No, It can't. First possibility: VC Triggerdelay. You need an A-171 VC slew limiter followed by an A-167 comparator (maybe the A-163 in OR-mode would wo
2011-07-20 by aletropdj
One A-162 Dual Trigger Delay? i think that, but i dont know can be controled by CV? Cheers --- In Doepfer_a100@yahoogroups.com, Giorgio wrote: > > you need a voltage controlled gate delay. set the time to 1 step manually or with a CV offset, then CV from either anothr row of the
2011-07-19 by Giorgio
you need a voltage controlled gate delay. set the time to 1 step manually or with a CV offset, then CV from either anothr row of the 155 or wherever. On Jul 19, 2011, at 4:13 PM, "aletropdj" wrote: > Hi there. > > Im sequencing a sample with A155, but i only can trigger the steps
2011-07-19 by Richard Horsman
Sure looks like a shuffle to me - de-quantizing the beats by a variable amount yes?
2011-07-19 by York Luethje
Just to be clear: you are using a LFO as the clock and want to create a shuffle effect? _____ Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im Auftrag von aletropdj Gesendet: Dienstag, 19. Juli 2011 16:14 An: Doepfer_a100@yahoogroups.com Betreff: [Doepfe
2011-07-19 by aletropdj
Yes, im using a lfo as clock. I dont know if is a shuffle effect (dont know that) but the picture illustrate what im looking for... thanks --- In Doepfer_a100@yahoogroups.com, "York Luethje" wrote: > > Just to be clear: you are using a LFO as the clock and want to create a > shuf
2011-07-19 by dennis henderson
Hello, i need to get rid of this stuff fast & also have more that i will be putting up later. Will take BEST OFFERS(sorry about the new prices). Located in Kansas City, USA a124 wasp filter a111 highend vcoa110 standard vco x2 a116 vc waveform processor a128 fixed filter bank a12