Yahoo Groups archive
Messages
Page 29 of 564 · 28179 messages matched
2015-12-14 by isoldeisobelle@gmail.com
There is a lot to be said and commended for when going with one manufacturer. Learning the vagaries and quirks and sweet spots inherent within the overall design can really teach you a lot... and you just get a feel for where things should be when creating sound. I read a recent
2015-12-14 by christian ienni
i have multiple A100 systems, so some are "pure Doepfer-silver" and others (the monster base & "Chaos Box") are very "Frankensteined" ("It's pronounced: 'Fronk-en-steened'!" ^_^ ). but then my entire living room looks like the inside of the TARDIS, a strange mashup of architectur
2015-12-14 by Zoë Blade
I'm glad I'm not the only one who prefers to keep her non-Doepfer modules "quarantined" in a separate rack. :D I love some of them, but really dig the single-manufacturer aesthetic, and Doepfer's modules are a lot better built than some others I have. On 14 Dec 2015, at 17:51, is
2015-12-14 by yahoo@doepfer.de
> We have a store here in Toronto (and head office in Montreal) called Moog > Audio. I have ordered many things from them lately (they sell a lot of > modular gear and synthesizers) and recently added the Doepfer modules so I > decided to try ordering from them instead of Martin
2015-12-14 by yahoo@doepfer.de
> I couldn't seem to find that link Dieter. Would a new ribbon controller be comparable with an old Ribbon Controller Module? > > David Yes, the manuals are compatible. The old version used a pressure sensor (conductive rubber) that was not as sensitive as the new one. That's the
2015-12-14 by David Kellett
That should have read "compatible" David www.movingisliving.co.uk Sent from my iPhone > On 14 Dec 2015, at 17:55, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] wrote: > > I couldn't seem to find that link Dieter. Would a new ribbon controller be comparable with an old
2015-12-14 by David Kellett
I couldn't seem to find that link Dieter. Would a new ribbon controller be comparable with an old Ribbon Controller Module? David www.movingisliving.co.uk Sent from my iPhone On 14 Dec 2015, at 17:16, yahoo@doepfer.de [Doepfer_a100] wrote: >> Just to check - it is another ribbon
2015-12-14 by isoldeisobelle@gmail.com
''Why would Doepfer release a whole series of Serge when Elby is just about to do this?'' Because, many people prefer just Doepfer. What Doepfer offers to Euro is a complete modular system in the true sense of the term, the number of modules available within the Doepfer range is
2015-12-14 by Scott Rogers
We have a store here in Toronto (and head office in Montreal) called Moog Audio. I have ordered many things from them lately (they sell a lot of modular gear and synthesizers) and recently added the Doepfer modules so I decided to try ordering from them instead of Martin this tim
2015-12-14 by yahoo@doepfer.de
> The question is: Are they available? > > I ordered one in early October and I’m still waiting. > > Scott Where did you order ? Dieter Doepfer
2015-12-14 by Scott Rogers
The question is: Are they available? I ordered one in early October and I'm still waiting. Scott From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Sent: Monday, December 14, 2015 12:23 PM To: Doepfer_a100@yahoogroups.com Subject: Re: AW: AW: [Doepfer_a100]
2015-12-14 by Neil Kagan
The current one on the market is great to play, highly responsive and very sturdy. Neil Sent from my iPhone On 14 Dec 2015, at 17:16, yahoo@doepfer.de [Doepfer_a100] wrote: >> Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought
2015-12-14 by yahoo@doepfer.de
> Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my ribbon > controller and module secondhand and the ribbon controller is so hard that to get a pressure signal you have to virtually > stand in the thing - well a handstand
2015-12-14 by yahoo@doepfer.de
> Ahh I see!! And I need a ribbon not a box. > > > Anyone know is the ribbon itself available separately? > > > David As already mentioned in my last message: "As we offer both parts also separately you should be able to order it from each of our dealers (I'd try SchneidersLaden
2015-12-14 by Neil Kagan
Perhaps something inspired by the resonant eq but voltage controlled? I love the Buchla spectral processor, which can be used like a fixed filter bank but also a vc filter. Neil Sent from my iPhone On 14 Dec 2015, at 10:22, yahoo@doepfer.de [Doepfer_a100] wrote: >> Since the name
2015-12-14 by Elby Designs - Laurie Biddulph
We do assembled modules as well!
2015-12-14 by Elby Designs - Laurie Biddulph
Go to Elby-designs.com!
2015-12-14 by Neil Kagan
Yup: http://www.schneidersladen.de/en/doepfer-a-198-ribbon-controller-nur-only-manual.html Sent from my iPhone > On 14 Dec 2015, at 16:06, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] wrote: > > Ahh I see!! And I need a ribbon not a box. > > Anyone know is the ribbon
2015-12-14 by David Kellett
Ahh I see!! And I need a ribbon not a box. Anyone know is the ribbon itself available separately? David www.movingisliving.co.uk Sent from my iPhone > On 14 Dec 2015, at 15:45, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] wrote: > > Neither, it's the control box which is stan
2015-12-14 by Neil Kagan
Neither, it's the control box which is standalone. Neil Sent from my iPhone > On 14 Dec 2015, at 15:40, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] wrote: > > Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my
2015-12-14 by Neil Kagan
I'm sorry I happen to prefer the visual design of a system from one manufacturer. I think that mixed systems look awful, regardless if f how cool they might be. Sent from my iPhone > On 14 Dec 2015, at 13:49, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] wrote: > > T
2015-12-14 by Neil Kagan
Yeah I'll call Andy later! Sent from my iPhone > On 14 Dec 2015, at 13:55, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] wrote: > > Hey Neil, > > Isn't it smart to try Emis first? You were in the UK I remember... > > All the best, > > Ernst > > > > >> On Mon, Dec 14,
2015-12-14 by David Kellett
Just to check - it is another ribbon controller not the module that you need? I think I do too. I bought my ribbon controller and module secondhand and the ribbon controller is so hard that to get a pressure signal you have to virtually stand in the thing - well a handstand on on
2015-12-14 by Scott Rogers
Yeah, I’m finding it a bit strange too. I do understand though. I thought it looked pretty cool being all silver and shiny too. But when I decided I needed to have some other modules, well, the hell with it! I just got a nice Aion 904a filter. It’s black so it doesn’t fit in at a
2015-12-14 by achtung_999
Hey Neil, Isn't it smart to try Emis first? You were in the UK I remember... All the best, Ernst On Mon, Dec 14, 2015 at 12:50 PM, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Oh thanks Dieter I'll try emailing as it wasn't listed on the
2015-12-14 by achtung_999
Oh and Florian that's not by Thonk but by a series of manufacturers. Ken Stone (CGS) has made the original PCB, the daughterboard with the pots is by Manhattan Analog and the panel by Clark. This must really be a nightmare for the purists :D All the best, Ernst On Mon, Dec 14, 20
2015-12-14 by achtung_999
The purism exhibited in this thread makes me chuckle Neil and Jacco. But hey, it's your loss :D Why would Doepfer release a whole series of Serge when Elby is just about to do this? That would not be a very smart business move in my eyes.. In case you missed it: Elby also sells r
2015-12-14 by Jacco Ville
Not me ;-) No analog modelling in my rack. Cheers Verstuurd vanaf mijn iPhone 5 Black OPS Edition > Op 14 dec. 2015 om 14:33 heeft Florian Anwander fanwander@mnet-online.de [Doepfer_a100] het volgende geschreven: > > Aaah! That one is not by Serge, but by Thonk. Now I understand.
2015-12-14 by Florian Anwander
Aaah! That one is not by Serge, but by Thonk. Now I understand. btw: I doubt there will be a big market for it, especially since the (incredible) "Rings" by Mutable Instruments is in the market. I know it is very different from the Serge, but it will draw a lot of potential buyer
2015-12-14 by Jacco Ville
Hello there Florian, That's the one. I would love to have this made by Doepfer, no sliders please. I have the mainboard pcb but don't want to build it because I want a clean A100 system. Cheers Jacco Verstuurd vanaf mijn iPhone 5 Black OPS Edition > Op 14 dec. 2015 om 11:44 heeft
2015-12-14 by Neil Kagan
Oh thanks Dieter I'll try emailing as it wasn't listed on the website. Regards, Neil Sent from my iPhone > On 14 Dec 2015, at 10:22, yahoo@doepfer.de [Doepfer_a100] wrote: > > > Hi people, > > > > Does anyone know where I can buy just the box controller? I've got the ribbon and m
2015-12-14 by Florian Anwander
Hello Jacco Am 13.12.2015 um 19:27 schrieb jaccoville@yahoo.com [Doepfer_a100]: > Since the name Serge is "connected" to the A100 system will there be more future modules in the spirit of Serge? > I would very like the 10 band resonant eq. > Any chance of production? > Stupid que
2015-12-14 by yahoo@doepfer.de
> Since the name Serge is "connected" to the A100 system will there be more future modules in the spirit of Serge? > I would very like the 10 band resonant eq. > Any chance of production? > > Cheers > > Jacco It's a bit difficult for us to make such a decision. First of all we ha
2015-12-14 by yahoo@doepfer.de
> Hi people, > > Does anyone know where I can buy just the box controller? I've got the ribbon and module already but want to use the > ribbon with another rig. > > Neil As we offer both parts also separately you should be able to order it from each of our dealers (I'd try Schnei
2015-12-14 by Jacco Ville
Hi Neil, These are exactly my thoughts. Don't like the look of DIY into my Doepfer system. Cheers Jacco Verstuurd vanaf mijn iPhone 5 Black OPS Edition > Op 14 dec. 2015 om 07:32 heeft Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] het volgende geschreven: > > I think Jacco was
2015-12-14 by Neil Kagan
I think Jacco was specifically asking about the A-100 series. I have a Doepfer only system as I prefer the look of it, so I totally understand wanting other series modules in Doepfer format. Also, some of us don't want to 'learn to solder'.... Neil Sent from my iPhone > On 14 Dec
2015-12-14 by achtung_999
Btw. There is loads of Serge for Eurorack at http://www.elby-designs.com/contents/en-us/d58_ES_-_Euro_Serge.html Besides the Thonk link in the last mail there is more DIY stuff for sale at https://synthcube.com/cart/ On Mon, Dec 14, 2015 at 1:04 AM, achtung_999 heinrich.himmelwas
2015-12-14 by achtung_999
Learn to solder: https://www.thonk.co.uk/shop/serge-res-eq-ii/ On Sun, Dec 13, 2015 at 7:27 PM, jaccoville@yahoo.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Since the name Serge is "connected" to the A100 system will there be more future modules in the spirit of Serg
2015-12-13 by jaccoville@yahoo.com
Since the name Serge is "connected" to the A100 system will there be more future modules in the spirit of Serge? I would very like the 10 band resonant eq. Any chance of production? Cheers Jacco
2015-12-13 by Neil Kagan
Hi people, Does anyone know where I can buy just the box controller? I've got the ribbon and module already but want to use the ribbon with another rig. Neil Sent from my iPhone
2015-12-10 by yahoo@doepfer.de
> Dear all, > > what is the Current of the A-180-3? There is obviously no concrete specification on Doepfer’s Homepage L > > I guess it could be something around 30 mA (+12 V), correct? > > Best from cologne/Germany > Wolfram The current consumption of the A-180-3 is +20mA / -20m
2015-12-09 by jaccoville@yahoo.com
Hi there, I guess so but I didn't measure my 180's. The buffered multiple from Intellijel, which does the same , Is having specs like: 4ma @ +12V 17ma @ -12V Cheers Jacco
2015-12-09 by Wolfram Henke
Dear all, what is the Current of the A-180-3? There is obviously no concrete specification on Doepfer’s Homepage L I guess it could be something around 30 mA (+12 V), correct? Best from cologne/Germany Wolfram
2015-12-09 by jaccoville@yahoo.com
Done! Thank you Dieter Cheers Jacco
2015-12-09 by yahoo@doepfer.de
> Hello again from Holland, > > Today I received my A187-1 DSP module. > Manual says it's possible to reduce current from 200mA to 140mA by switching off the backlight. > How do I do that? > > Greetings > > Jacco For this you have to remove R33 (22 Ohm) on the top edge of the pcb
2015-12-09 by jaccoville@yahoo.com
Hello again from Holland, Today I received my A187-1 DSP module. Manual says it's possible to reduce current from 200mA to 140mA by switching off the backlight. How do I do that? Greetings Jacco
2015-12-08 by jaccoville@yahoo.com
Thank you Dieter for your reply. Nice to read how things are "building" Cheers Jacco
2015-12-07 by yahoo@doepfer.de
> Hoping....wishing.... > > A shiny new sequencer under the Christmas tree... > > Jacco > ;-) The A-157 front panels are ready and the electronic parts of the pc boards are currently assembled and then soldered. Even the preliminary version of the user's manual is ready. But I ca
2015-12-05 by Scott Rogers
I’m just hoping for the ribbon controller I ordered in early October. Hoping, wishing… Scott From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Sent: Saturday, December 05, 2015 9:34 AM To: doepfer_a100@yahoogroups.com Subject: [Doepfer_a100] A157 (be)for(e)
2015-12-05 by Jacco Ville
Hoping....wishing.... A shiny new sequencer under the Christmas tree... Jacco ;-) Verstuurd vanaf mijn iPhone 5 Black OPS Edition