Re: NEW A180-3 multiple
2015-12-02 by thomas_escure@yahoo.fr
Thank you Jacco, I wasn't aware of that shop ! Regards, Thomas
Messages
Browse messages
Page 30 of 564 · 28179 messages matched
Re: NEW A180-3 multiple
2015-12-01 by jaccoville@yahoo.com
Hello Thomas, I bought them at http://www.modularsynthesizers.nl/ Cheers Jacco
Re: NEW A180-3 multiple
2015-12-01 by thomas_escure@yahoo.fr
Hello Jacco, Could you tell us where you bought the A-180-3 ? I cannot seem to find it in my usual shops...
NEW A180-3 multiple
2015-11-29 by Jacco Ville
Last week I received the new buffered multiples to expand my modular (in construction). Was waiting for these nice modules since I wanted to use these to connect my 8 A110's without tuningproblems. Hope to test them soon.... Cheers Jacco Verstuurd vanaf mijn iPhone 5 Black OPS Ed
sharing photo's
2015-11-28 by jaccoville@yahoo.com
As a newby...how do I upload images to this group? Using the photo upload option is resulting in an error message. For MODS ...excuse me if this is not the correct way to report this
Re: AW: [Doepfer_a100] A160-2 reset behaviour
2015-11-27 by bassmaster1@hotmail.com
Gutemorgen Dieter, Thank you again for sending me in the right direction. ...still learning...everyday Jacco Ville
AW: [Doepfer_a100] Diode Ampere
2015-11-27 by yahoo@doepfer.de
> Hi to you all, y'aaalll > > > > I'm still busy with a huge project to renew some components of my good old Doepfer modules [more than 25]. > But to make a long story short: I need to replace diodes too, for they do not measure well (diode test) and some of the > modules have li
AW: [Doepfer_a100] A160-2 reset behaviour
2015-11-27 by yahoo@doepfer.de
> Hallo there, > > My first post is a rather new modular user is about the A160-2. > Just started to make a nice case filled with Doepfer modules. > Still assembling.... > > Why is the 160-2 producing a high pulse on reset at all the outputs? > > I cant get a good reset with sequ
Diode Ampere
2015-11-26 by a11@live.nl
Hi to you all, y'aaalll I'm still busy with a huge project to renew some components of my good old Doepfer modules [more than 25]. But to make a long story short: I need to replace diodes too, for they do not measure well (diode test) and some of the modules have little malfuncti
Re: AW: [Doepfer_a100] A160-2 reset behaviour
2015-11-26 by bassmaster1@hotmail.com
Hello Dieter, Thanks for your fast reply. I (think) I understand, I also bought the A155/154 set twice and that works very well with resets when testing. I will contact Christian about this "problem". Hopefully there will be an fix. Thanks again, Jacco Ville
Re: AW: [Doepfer_a100] A177-2 - what foot switch?
2015-11-26 by David Kellett
Thanks Dieter!! I shall ask Andy at EMIS. David www.movingisliving.co.uk Sent from my iPhone On 26 Nov 2015, at 16:18, yahoo@doepfer.de [Doepfer_a100] wrote: >> Can anyone tell me - would "closed" or " open" momentary switch be the correct description? There seem to be two VFP-2
AW: [Doepfer_a100] A160-2 reset behaviour
2015-11-26 by yahoo@doepfer.de
> Hallo there, > > My first post is a rather new modular user is about the A160-2. > Just started to make a nice case filled with Doepfer modules. > Still assembling.... > > Why is the 160-2 producing a high pulse on reset at all the outputs? > > I cant get a good reset with sequ
AW: [Doepfer_a100] A177-2 - what foot switch?
2015-11-26 by yahoo@doepfer.de
> Can anyone tell me - would "closed" or " open" momentary switch be the correct description? There seem to be two VFP-2 > choices at Thormann. The VPP-2 10 or 15 the 15 is closed the 10 open. My pedals at home just say VFP-2. I need to buy > two as soon as possible and then a fu
Re: [Doepfer_a100] A177-2 - what foot switch?
2015-11-26 by David Kellett
Can anyone tell me - would "closed" or " open" momentary switch be the correct description? There seem to be two VFP-2 choices at Thormann. The VPP-2 10 or 15 the 15 is closed the 10 open. My pedals at home just say VFP-2. I need to buy two as soon as possible and then a further
A160-2 reset behaviour
2015-11-26 by JV .
Hallo there, My first post is a rather new modular user is about the A160-2. Just started to make a nice case filled with Doepfer modules. Still assembling.... Why is the 160-2 producing a high pulse on reset at all the outputs? I cant get a good reset with sequencers i.e. system
Re: [Doepfer_a100] A177-2 - what foot switch?
2015-11-26 by David Kellett
It may be that my pedal is faulty then as it is indeed a vfp2. I have another one that I have not tried yet as I assumed it was the pedal that was the wrong model. I shall try the other one tonight and see if it works better / differently. Maybe I just need new pedals!! I had not
Re: [Doepfer_a100] A177-2 - what foot switch?
2015-11-26 by Nicholas Keller
" A-177 is compatible with the footcontrollers FP5 and double foot switch VFP2 (see Accessories ). The Foot controller and double foot switch are not included with the module but have to be ordered in addition. If you want to use another foot controller or foot switch it has to b
Re: [Doepfer_a100] Re: A113
2015-11-26 by David Kellett
I have watched your video when I was researching the A113. Good video. Yes the A113 has lots of potential - doing Trautonium type things is just the tip of the iceberg. That is what is so interesting about Modular stuff - you can repurpose nearly everything to make something diff
Re: AW: [Doepfer_a100] A113
2015-11-26 by David Kellett
Thanks for the info Dieter. It may be that I get "better" sines by adjusting the FM Aids as they expect 5V point to point. What I'm getting at the moment are some very odd looking shapes :-) They sound rather interesting but not what I needed for this patch to work. Thanks again,
Re: A113
2015-11-26 by isoldeisobelle@gmail.com
Hi! The A-113 was one of the first modules that I ever bought and I still use it regularly to this day, in my opinion it is very overlooked. Here is an unashamed spam/plug of one of my patches using it. Doepfer A-113 Subharmonic Generator II Doepfer A-113 Subharmonic Generator II
AW: [Doepfer_a100] A113
2015-11-26 by yahoo@doepfer.de
> Hi - can anyone tell me what the Peak to Peak on the single outa of an A113 is? I'm trying to do something with the > single outs that is not working as expected. I'm putting them into FM Aids to convert to sine waves for a special > application but the FM Aids do not seem to b
Re: [Doepfer_a100] A113
2015-11-25 by David Kellett
Looking at the oscilloscope some more - I think the A113 are maybe not as loud and not as sharp edged as other oscillators. The slope seems to be slightly "bendy" and the rise is maybe very slightly less fast. I guess my idea is not going to work quite as I had envisaged. I had h
Re: [Doepfer_a100] A113
2015-11-25 by David Kellett
The Saws look, on an oscilloscope, to be the usual way round - virtually instant stack and then a fall. I don't know how to tell if they have a DC offset or what the VPP is. I'm ok with listening and a very cursory look at the oscilloscope but not very electronically literate bey
Re: [Doepfer_a100] A113
2015-11-25 by achtung_999
Hi David, One thing that springs to mind (and mind you, I don't own an A113!) is that it might have to do with the direction the saw wave moves. I notice a difference when using ascending or descending saw waves wave. I'm just guessing here... Good luck! Ernst On Wed, Nov 25, 201
A177-2 - what foot switch?
2015-11-25 by David Kellett
Hi, I have recently bought two A177-2s. Alas my dual foot switches that I have for other keyboards are not the right type. Only one pedal produces any effect and that is to produce a gate when released. These pedals are VPF2s. I don't want to mod them as I use them for other thin
A113
2015-11-25 by David Kellett
Hi - can anyone tell me what the Peak to Peak on the single outa of an A113 is? I'm trying to do something with the single outs that is not working as expected. I'm putting them into FM Aids to convert to sine waves for a special application but the FM Aids do not seem to be doin
AW: AW: AW: [Doepfer_a100] help for starter needed
2015-11-25 by yahoo@doepfer.de
> hi Dieter! thank you from my heart for taking the time to answer to me. > i followed your intructions and checked the board; i can't see the labels for gate/cv, but i compared my module to this photo > http://www.doepfer.de/A100_pictures/doepfer_a190.jpg > [how great is that yo
Re: AW: AW: [Doepfer_a100] help for starter needed
2015-11-24 by omega_images2000@yahoo.it
hi Dieter! thank you from my heart for taking the time to answer to me. i followed your intructions and checked the board; i can't see the labels for gate/cv, but i compared my module to this photo http://www.doepfer.de/A100_pictures/doepfer_a190.jpg [how great is that you have p
AW: AW: [Doepfer_a100] help for starter needed
2015-11-24 by yahoo@doepfer.de
> thank you all soooo much for your replies. they have been very helpful and i am obliged to all of you. > > so, after what Dieter said, if my A-190-1 is an early model there is danger, but if it is a later version there is no > danger at all. i checked the module, and at the bac
Re: AW: [Doepfer_a100] help for starter needed
2015-11-23 by omega_images2000@yahoo.it
thank you all soooo much for your replies. they have been very helpful and i am obliged to all of you. so, after what Dieter said, if my A-190-1 is an early model there is danger, but if it is a later version there is no danger at all. i checked the module, and at the back it say
AW: [Doepfer_a100] help for starter needed
2015-11-23 by yahoo@doepfer.de
> But the A-190-1 has a transistor-buffer in the gate-out line. So there > is no danger at all. I'm sorry but I have to contradict. The (old) A-190-1 had a transistor at the gate output together with a pull-up resistor connected to +12V. The transistor was used as a switch to GND
Re: [Doepfer_a100] help for starter needed
2015-11-22 by Nicholas Keller
To comment on a few things Florian didn't mention: Yes you can patch audio outs to CV ins and CV outs to audio ins, just be aware of when inputs are DC or AC coupled as that may affect the result (but there is no risk of damage). It's just this sort of flexibility that lends a mo
Re: [Doepfer_a100] help for starter needed
2015-11-22 by Florian Anwander
On 22.11.15 17:23 , iop poi omega_images2000@yahoo.it [Doepfer_a100] wrote: > now, first, in the A190-1 manual it says that all VCOs in the same bus > can be controlled by the internal connections. > may i supose that this means only Doepfer VCOs? Yes, that is valid only for Doep
help for starter needed
2015-11-22 by iop poi
greetings to everyone! i just got into the modular world, and, as my system consists almost entirely on Doepfer modules [12 out of the 14 modules are doepfer ones] it's great to know about this forum and be a part of it. as i have no experience at all, prehaps my questions will s
Re: AW: [Doepfer_a100] A113 - 5V version or not?
2015-11-17 by David Kellett
Thanks Dieter. I shall have a look tomorrow and then I'll know. I can't actually play with the new modules for a few days as I'm building a table / shelf thing to sit the Monster Base and two PMS12s on. Then there will be some great sounds again in my studio :-) David www.movingi
AW: [Doepfer_a100] A113 - 5V version or not?
2015-11-17 by yahoo@doepfer.de
> Hi, > > Just a quick question. I have just received my new A113 from EMIS in the uk. Do I assume it is a non 5V one? How can I tell? > > David The two versions can be distinguished by means of the bus connection cable: old version = 16 wires, new version = 10 wires. Only if it'
A113 - 5V version or not?
2015-11-17 by David Kellett
Hi, Just a quick question. I have just received my new A113 from EMIS in the uk. Do I assume it is a non 5V one? How can I tell? David www.movingisliving.co.uk Sent from my iPhone
Sequencers for sale UK
2015-11-16 by soundalloverit@googlemail.com
A-155 Analog/Trigger Sequencer £150 A-155 Analog/Trigger Sequencer + A-154 Sequencer Controller £230 Intellijel uStep2 £110 MFB SEQ 02 £100 Can post or meet in London brian
Re: voltage for logic function in the A 189-1
2015-11-15 by acgenerator@att.net
So if you are sending the A-155 output to the CV in put of the Bit Crusher that voltage would be used as the second source for the logic, That signal would get treated as a High/Low. I've tried with a number of other sources (I don't own A-155) and can confirm the BC functionalit
Re: AW: [Doepfer_a100] A-199 & 17" reverb tanks
2015-11-02 by achtung_999
You could also keep the tank external. Doing this myself, no problem taking it to gigs, I have a dedicated box for it. On Mon, Nov 2, 2015 at 12:00 AM, XCVII supraleiter@yandex.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Herr Florian, because one may wish to omit or
Re: AW: [Doepfer_a100] A-199 & 17" reverb tanks
2015-11-01 by XCVII
Herr Florian, because one may wish to omit or arbitrarily audition various different reverb tanks in the casual future, the idea of externalmounting a power supply trafo is akin to an insulin pump and/or colostomy bag (less gvts hanging out at the gig). 01.11.2015, 17:51, "Floria
Re: AW: [Doepfer_a100] A-199 & 17" reverb tanks
2015-11-01 by Florian Anwander
On 01.11.15 08:01 , XCVII supraleiter@yandex.com [Doepfer_a100] wrote: > Considering building a shielded external box for tank and using XLR connection. Why do you try to remove the symptom instead of healing the cause? Remove the transformer from the powersupply pcb, build an ex
Re: AW: [Doepfer_a100] A-199 & 17" reverb tanks
2015-11-01 by XCVII
Finally got the opportunity to experiment with a 314mm x196mm x 0.2mm sheet of 3M Ultraperm 80 MuMetal in my A-100 PMS12. Having practically no formal knowledge of engineering or physics or means to measure the emissions, it came down to patching a basic sparse LPG bongo striking
Re: [Doepfer_a100] A-100PSU2
2015-10-31 by achtung_999
The system 500 modules aren't out yet I believe. E. On Fri, Oct 30, 2015 at 8:45 PM, 'Scott Rogers' scott@scottfromcanada.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: OOOOOps. I think I made a mistake here. I think all this might be referring to the System 1 modules.
RE: [Doepfer_a100] A-100PSU2
2015-10-30 by Scott Rogers
OOOOOps. I think I made a mistake here. I think all this might be referring to the System 1 modules. I was actually referring to the System 500 modules, which is what I thought you originally meant. I looked it up and found that the System 1 modules use 450ma. I don\u2019t see an
RE: [Doepfer_a100] A-100PSU2
2015-10-30 by syndromeda@telenet.be
Check what power they consume...amazing!!! ------------------------------------------------------ Danny Budts info@syndromeda.be www.syndromeda.be https://www.facebook.com/Syndromeda https://syndromeda.bandcamp.com/ https://www.facebook.com/pages/Syndromeda/189901007722025?ref=hl
AW: [Doepfer_a100] A-100PSU2
2015-10-30 by yahoo@doepfer.de
If you already own an A-100LC9: yes, because each Roland module requires 480 mA ! But the good news is that (according to a note from Roland) the modules run with 5V or 12V ! Each module has a built in switching supply that accepts both voltages. So the +5V of the new A-100PSU3 c
RE: [Doepfer_a100] A-100PSU2
2015-10-30 by Scott Rogers
So is there going to be a problem using the Roland modules in my LC9 case? Thanks Scott -----Original Message----- From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Sent: Friday, October 30, 2015 5:14 AM To: Doepfer_a100@yahoogroups.com Subject: AW: [Doepfe
Re: AW: [Doepfer_a100] A-100PSU2
2015-10-30 by syndromeda@telenet.be
Wow, what a Great idea, specially for the Roland modules. Well done! ------------------------------------------------------ Danny Budts info@syndromeda.be www.syndromeda.be https://www.facebook.com/Syndromeda https://syndromeda.bandcamp.com/ https://www.facebook.com/pages/Syndrom
AW: [Doepfer_a100] A-100PSU2
2015-10-30 by yahoo@doepfer.de
Hello, you find my answers written inline. And there is an additional note in this regard: from about end of November a new power supply will be available (A-100PSU3). It will offer 2000mA@+12V, 1200mA@-12V and has additional +5V with 4000mA available. It turned out that there ar