Yahoo Groups archive
Messages
Page 31 of 564 · 28179 messages matched
2015-10-29 by rheinlandhippie@yahoo.de
Hi Florian, thank you very much for your feedback and the good example with the headphone amp. At last one thing come true: I need one more A-100 Case. “My setup allows no headroom for headroom ” Yeah, it’ sounds weird indeed… some kind of infinite loop A T-Shirt with this silly
2015-10-29 by christian ienni
My setup allows no headroom for headroom I think I have to make a T-shirt with this phrase ;-) i'll buy at least a couple if you do! :-D btw Florian i want to thank you in general for all the wonderful hyper-technical info you provide in this group! i have some technical backgrou
2015-10-29 by Florian Anwander
Hello Wolfram as both questions are related, I will answer the second question first Another quickie: Is there any difference between the voltage consumption of connected modules (buffered indeed) in use and unpatched modules (but connected to the bus)? I think the most clear exa
2015-10-29 by Wolfram Henke
Hi everybody, short question: Are the 1200mA of the A-100PSU2 completely available or is there any need for some kind of headroom? To be honest: My actual setup allows no headroom for headroom :-( Another quickie: Is there any difference between the voltage consumption of connect
2015-10-29 by syndromeda@telenet.be
Oh, now I see, Thanks Dieter. ------------------------------------------------------ Danny Budts info@syndromeda.be www.syndromeda.be https://www.facebook.com/Syndromeda https://syndromeda.bandcamp.com/ https://www.facebook.com/pages/Syndromeda/189901007722025?ref=hl ----- Oorspr
2015-10-29 by yahoo@doepfer.de
> Hi, > > > Any more news about the development of the new modules, A-161-2 and A-160-3 (?)?. > > > Thanks I'm sorry. At present we are still busy with the finishing of the A-157-1/2/3 and the A-190-5. And I cannot remember that I ever mentioned a module named A-160-3 (it was a v
2015-10-29 by syndromeda@telenet.be
Hi, Any more news about the development of the new modules, A-161-2 and A-160-3 (?)?. Thanks
2015-10-10 by yahoo@doepfer.de
> Hi folks, relatively new to all, of this. > > What's my problem? > > Horrendous tracking with the A190-4. Tested system with Kenton and it's fine. VCOs animodule lil monster and make noise > STO calibrated fine on that. > > A couple of days later, running from both logic and ab
2015-10-09 by Nicholas Keller
Good to hear! Happy to help On Friday, October 9, 2015, rheinlandhippie@yahoo.de [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: @Nicolas: Works fine... thank you again :-) Best regards Wolfram
2015-10-09 by rheinlandhippie@yahoo.de
@Nicolas: Works fine... thank you again :-) Best regards Wolfram
2015-10-09 by Mike Gray
Hi folks, relatively new to all, of this. What's my problem? Horrendous tracking with the A190-4. Tested system with Kenton and it's fine. VCOs animodule lil monster and make noise STO calibrated fine on that. A couple of days later, running from both logic and ableton the tracki
2015-10-09 by rheinlandhippie@yahoo.de
Hi Nicolas, many thanks for your tip - strong need to check this immediately this evening :-) >> A-190-4 Gate out to A-141-2 Gate In (you don't mention that, but I assume you patched it) I guess that is not necessary in my case (Jumper Settings etc.) because the A-141-2 picks up
2015-10-09 by Nicholas Keller
You should try A-190-4 CV2 to LevCV input, A-190-4 Gate out to A-141-2 Gate In (you don't mention that, but I assume you patched it), VarOut to A-131 CV In, sound source to A-131 audio In. Velocity then should control the level of the variable output. The A-130 you are using alre
2015-10-08 by Wolfram Henke
Hi, the module description for the awesome A-141-2 on miscellaneoussites on the internet (and obviously @doepfer.de) bring out some kind of an easyand efficient way to obtain velocity via “Var Out” and “Lev CV”. Well, after trying different possibilities I always find thebest sol
2015-10-08 by syndromeda@telenet.be
So it is! Also a very big thank you from me Dieter! ------------------------------------------------------ Danny Budts info@syndromeda.be www.syndromeda.be https://www.facebook.com/Syndromeda https://syndromeda.bandcamp.com/ https://www.facebook.com/pages/Syndromeda/1899010077220
2015-10-08 by Zoë Blade
> I know you've heard this... But your products are great, and you have great customer service, and you are overall, a kind and generous guy. > > Thanks for being there for all of us! I'd say Dieter provides the best customer service I've seen ever, hands down. Thank you Dieter!
2015-10-08 by yahoo@doepfer.de
> Thanks Dieter! > > I know you've heard this... But your products are great, and you have great customer service, and you are overall, a kind > and generous guy. > > Thanks for being there for all of us! > > Ray Thank you for the kind words. Dieter Doepfer
2015-10-08 by rayzermatic@yahoo.com
Thanks Dieter! I know you've heard this... But your products are great, and you have great customer service, and you are overall, a kind and generous guy. Thanks for being there for all of us! Ray
2015-10-08 by yahoo@doepfer.de
> Thank you for your answer Dieter > but if the switch is in the position 2 ( or 3 or 4 ) it became a logical module , using the input signal plug and the BC > cv input . > is my original mail more understandable ? > > Thank you > > GEORGES It's a while ago that the module was de
2015-10-08 by Anwander, Florian
If you use it that way, you have to adopt the levels of both signals ("Signal In" and "BC CV") with the "Lev" potentiometers and the BC-Offset to act equally. Am 08.10.2015 um 10:53 schrieb fitz fytz_72@yahoo.fr [Doepfer_a100]: > > > Thank you for your answer Dieter > but if the
2015-10-08 by fitz
Thank you for your answer Dieterbut if the switch is in the position 2 ( or 3 or 4 ) it became a logical module , using the input signal plug and the BC cv input .is my original mail more understandable ? Thank you GEORGES De : "yahoo@doepfer.de [Doepfer_a100]" À : Doepfer_a100@y
2015-10-08 by yahoo@doepfer.de
> Hi > I'got a A189-1. > I 'm asking a question about voltage to trigger the function and ( position 2) or the other logical functions . > if I plug 2 out of a A155 ( trigger output or gate output ) in the A 189-1 the logical function doesn't works , is it > because the A155 give
2015-10-07 by david.maczo@yahoo.co.uk
Hi there, I'm selling in good condition: A-110 100 EUR A-112 100 EUR + shipping from Hungary. Cheers, David
2015-10-07 by Zoë Blade
> LOL! Sounds like 100% Zoë Blade to me! Haha, thanks! :D I think Nina insisted on doing a tiny bit of production on Adorned Head, just to take the edge off my A-117 abuse and make it bearable... but it's not exactly what she wants to be known for. :) Playing the guitar on Cream
2015-10-07 by Sean Dynan
On 7 October 2015 at 10:06, Zoë Blade zoe@bytenoise.co.uk [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: > > Here's a fun one of mine, all A-100 plus I think two ASol drum modules and some strings and a softsynth. 90% A-100 though. :) > > https://doggiedogster.bandcamp.com/
2015-10-07 by fitz
Hi I'got a A189-1. I 'm asking a question about voltage to trigger the function and ( position 2) or the other logical functions . if I plug 2 out of a A155 ( trigger output or gate output ) in the A 189-1 the logical function doesn't works , is it because the A155 give a voltage
2015-10-07 by Zoë Blade
> my shop in Discogs: > http://www.discogs.com/seller/modularfan/profile > > all these albums feature the Doepfer A100 modular (plus other modulars). Here's a fun one of mine, all A-100 plus I think two ASol drum modules and some strings and a softsynth. 90% A-100 though. :) http
2015-10-07 by yahoo@doepfer.de
> Hi, > > maybe a “noobish” question: Does the jumper setting of the A-141-2 supports picking up the gate signal from the internal > bus as factory setting, correct? > > Thank you very much for a short reply. > > Best from Cologne/Germany > Wolfram Yes, usually the jumper JP4 is
2015-10-07 by Bakis Sirros
my shop in Discogs: http://www.discogs.com/seller/modularfan/profile all these albums feature the Doepfer A100 modular (plus other modulars).
2015-10-06 by Wolfram Henke
Hi, maybe a “noobish” question: Does the jumper setting of the A-141-2 supports picking up the gate signal from the internal bus as factory setting, correct? Thank you very much for a short reply. Best from Cologne/Germany Wolfram
2015-10-06 by yahoo@doepfer.de
> I just got a brand new A160-2 and I think I have a problem. > > First of all, the jumpers on the back are all set default as it came form the store. (All jumpered except the two sets at > the top that are to be left open in all cases.) > The top switch is set to Trg. (trigger)
2015-10-06 by rayzermatic@yahoo.com
I just got a brand new A160-2 and I think I have a problem. First of all, the jumpers on the back are all set default as it came form the store. (All jumpered except the two sets at the top that are to be left open in all cases.) The top switch is set to Trg. (trigger) The bottom
2015-10-05 by achtung_999
Fully agree with rule two :D On Mon, Oct 5, 2015 at 4:52 PM, james.husted@mac.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: The second rule of stackables - never stack more than 2 high. There isn’t a patch you can make that requires it. It is a wire - use the other end
2015-10-05 by james.husted@mac.com
The second rule of stackables - never stack more than 2 high. There isn’t a patch you can make that requires it. It is a wire - use the other end instead. -James > On Oct 4, 2015, at 1:09 PM, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] wrote: > > > > First rule of
2015-10-05 by yahoo@doepfer.de
> Hello Alexander > > On 26.09.15 19:10 , Alexander Catlin-Freytag atomcf@gmail.com [Doepfer_a100] wrote: > > http://www.till.com/articles/QuadTrapVCO/index.html > > > What is the advantage over the A-110-4 Quadrature Oscillator? > He says, that he has to convert the Trapezoid in
2015-10-05 by yahoo@doepfer.de
> I have just been reading the A157 page on the website and I see the A157-2 and A157-3 modules have been revised, I see > there are now only single outputs on the A157-2, I was wondering is it going to be possible to be able to daisychain 2 > or more A157-2's together to give yo
2015-10-04 by achtung_999
First rule of stack cables: Don't bend the stacked jack down ;-) On Sun, Oct 4, 2015 at 10:06 PM, florian anwander fanwander@mnet-online.de [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: Hello Kai logiclist@kainiggemann.com [Doepfer_a100]: > Or maybe stackcables might help?
2015-10-04 by florian anwander
Hello Kai logiclist@kainiggemann.com [Doepfer_a100]: > Or maybe stackcables might help? I admit, that stack cables look tempting, but they can cause ugly mechanical stress to the socket, if you bend the stacked jack down. Florian
2015-10-04 by Kai Niggemann
Or maybe stackcables might help? Sent from my phone On 04.10.2015, at 13:32, "ross_anderton@yahoo.com [Doepfer_a100]" wrote: > > > Yes, strangely enough I have heard of multiples, but the original A157-2 had 2 columns of outs. > >
2015-10-04 by ross_anderton@yahoo.com
Yes, strangely enough I have heard of multiples, but the original A157-2 had 2 columns of outs.
2015-10-04 by Florian Anwander
Hello On 04.10.15 12:15 , ross_anderton@yahoo.com [Doepfer_a100] wrote: I was wondering is it going to be possible to be able to daisychain 2 or more A157-2's together to give you multiple outs? I assume, that the 157-2 will be connected by a ribbon cable with the 157 (there are
2015-10-04 by achtung_999
You've heard of multiples, right? Since I see 8 outputs for 8 rows, I don't think anything is left out what can't be done with multiples... On Sun, Oct 4, 2015 at 12:15 PM, ross_anderton@yahoo.com [Doepfer_a100] Doepfer_a100@yahoogroups.com > wrote: I have just been reading the A
2015-10-04 by ross_anderton@yahoo.com
I have just been reading the A157 page on the website and I see the A157-2 and A157-3 modules have been revised, I see there are now only single outputs on the A157-2, I was wondering is it going to be possible to be able to daisychain 2 or more A157-2's together to give you mult
2015-09-26 by Florian Anwander
Hello Alexander On 26.09.15 19:10 , Alexander Catlin-Freytag atomcf@gmail.com [Doepfer_a100] wrote: http://www.till.com/articles/QuadTrapVCO/index.html What is the advantage over the A-110-4 Quadrature Oscillator? He says, that he has to convert the Trapezoid into classic wavefor
2015-09-26 by Alexander Catlin-Freytag
Thanks Dieter. Bakis, info here: http://www.till.com/articles/QuadTrapVCO/index.html Alexander Catlin-Freytag atomcf@gmail.com +49 (0) 1 768 2 738 754 > On 26 Sep 2015, at 18:03, Bakis Sirros synth_freak_2000@yahoo.com [Doepfer_a100] wrote: > > > what's a Tillman oscillator ? > >
2015-09-26 by Bakis Sirros
what's a Tillman oscillator ? From: "Alexander Catlin-Freytag atomcf@gmail.com [Doepfer_a100]" To: Doepfer_a100@yahoogroups.com Sent: Saturday, September 26, 2015 3:46 PM Subject: [Doepfer_a100] A-110-5 Tillman Oscillator Dear All, Just wondering if there is any news regarding th
2015-09-26 by yahoo@doepfer.de
> Dear All, > > Just wondering if there is any news regarding the A-110-5 Tillman Oscillator, and whether there were any more details or > a panel mockup available. > > All the best, > > Alex There were no proceedings during the last time as our focus was and still is on the anno
2015-09-26 by Alexander Catlin-Freytag
Dear All, Just wondering if there is any news regarding the A-110-5 Tillman Oscillator, and whether there were any more details or a panel mockup available. All the best, Alex
2015-09-25 by yahoo@doepfer.de
> Hi to you all, y'aaall, > > In was renewing some components of my old A-111 and I noticed, that the R44 on board 3 is a 4K7 resistor > (yellow-purple-red), but on the board it is written 22K. > And I measured it 4K68. > > Do somebody knows more about this, which one it should b
2015-09-25 by a11@live.nl
Hi to you all, y'aaall, In was renewing some components of my old A-111 and I noticed, that the R44 on board 3 is a 4K7 resistor (yellow-purple-red), but on the board it is written 22K. And I measured it 4K68. Do somebody knows more about this, which one it should be? I thank you