Yahoo Groups archive
Messages
Page 389 of 564 · 28179 messages matched
2005-07-21 by grove@zeta.org.au
> From: Keld S'rensen > Subject: Re: where's a good place to buy moduals??? > > There is an australian dealer: www.innovativemusic.com.au > and they seem to have almost every module in the Doepfer range. And they charge almost double the cost of everywhere else in the world, too.
2005-07-20 by alt-mode
Folks, If anyone has any of the following modules they are interested in selling, please drop me a note. I have some space in my system that wants to be filled ;) - A-101-1 vactrol multitype VCF - A-101-2 vactrol low pass gate - A-104 Trautonium filter - A-105 SSM VCF - A-132 Dua
2005-07-20 by Bakis Sirros
hello, indeed. my a154 clock behaves like this too. regards, bakis. --- selfoscillate wrote: > > hello robert, > > it's sad, but thats a problem on all a154 modules. > > best wishes > > ingo > > > --- In Doepfer_a100@yahoogroups.com, > "sineofthetimes" > wrote: > > Hello, > > > >
2005-07-20 by sineofthetimes
As terrible as it sounds I'm glad I'm not the only one with this problem. As stated earlier in the thread, external clocking signals run smooth into the unit. I wonder what could possibly cause the sudden shift in tempo. Mr. Doepfer (or anyone with knowledge to this design), when
2005-07-20 by Harry
Are there no solutions for this problem ??? Maybe some modifications or part replacements ??? Kind regards, Harry. --- In Doepfer_a100@yahoogroups.com, "selfoscillate" wrote: > > hello robert, > > it's sad, but thats a problem on all a154 modules. > > best wishes > > ingo > > > -
2005-07-20 by selfoscillate
hello fredrik, i often use the a160/a161 to divide fast clock signals for syncronisation purposes, or to retrigger envelopes or lfo's at certain points. i also use it from time to time in conjunction with an a166 logic module or to slow down the random gate sequences coming from
2005-07-20 by selfoscillate
hello robert, it's sad, but thats a problem on all a154 modules. best wishes ingo --- In Doepfer_a100@yahoogroups.com, "sineofthetimes" wrote: > Hello, > > I looked in the arhives to see if this question has been asked yet but > couldn't find any. This is my first post so if it h
2005-07-20 by spleensick
Hi everyone, I'm currently looking into buying a A-100 Basicsystem 2 (when I can afford to). I was wondering if you guys use you A-160 and A-161 much? That's the clock divider and the clock sequencer. If so, please tell me how you use them. I might switch them something else othe
2005-07-20 by Keld Sørensen
There is an australian dealer: www.innovativemusic.com.au and they seem to have almost every module in the Doepfer range. Keld --- In Doepfer_a100@yahoogroups.com, "zoog_angelspit" wrote: > Hi! > I'm wanting to buy some moduals - any idea of a fast and reliable > dealer who ships
2005-07-20 by zoog_angelspit
Hi! I'm wanting to buy some moduals - any idea of a fast and reliable dealer who ships to australia? I'm after Doepfer, Analogue Systems and Analogue Solutions. ROCK! KARL.
2005-07-19 by sineofthetimes
Hello, I looked in the arhives to see if this question has been asked yet but couldn't find any. This is my first post so if it has indeed been asked and answered, my apologies for rehashing old news ahead of time. I recently bought the A-154 sequencer controller and am very plea
2005-07-17 by RSA
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7337442135 enjoy! Thanks, Rob Adams
2005-07-15 by wiard300
Hi Everyone. I am getting out of the "eurorack biz" (for now), so I am selling off my Doepfer G6 rack and some modules. The rack power supply is 220 volt, but I have a transformer to use it with 110 volts, which I will include with the sale if desired. Along with the rack, I have
2005-07-13 by m0lkboy
hello, what do you think of the sequencer signal arts? it would be very interesting to use it with a bs.system doepfer with two vco? + a vostok? http://www.signalarts.ca/index.html#nav1
2005-07-13 by Florian Anwander
Hi to prevent unneccessary troubles (as it happened with Analogue Heaven maillist): Though this site is public accessible, please respect, that this guestbook is mainly for the family Moog. So please do not post "me too am sad"-postings there. A posting from Peter Grenader said o
2005-07-13 by selfoscillate
oh. thats really bad. my thoughts are with him, i hope that he will recover from this disease. best wishes ingo --- In Doepfer_a100@yahoogroups.com, tkrakowiak wrote: > I received this bit of sad news on the .microsound list: > > > "If you haven't heard, Bob Moog is battling a br
2005-07-12 by tkrakowiak
I received this bit of sad news on the .microsound list: "If you haven't heard, Bob Moog is battling a brain tumor right now... Here is a website his family put up to keep friends and family up to date about his condition... http://www.caringbridge.com/cb/inputSiteName.do?method=
2005-07-12 by Bakis Sirros
hello all, :-) in case you're interested: the first Parallel Worlds album EXISTENCE is, finally, available to buy online thru CDbaby.com at: http://cdbaby.com/cd/pworlds it contains mainly dark electronica tracks that were written between 1997 and 2000. the melodic elements are v
2005-07-10 by allanjhall
I've listed some items on ebay that may be of interest to Deopfer modular users:- Schaltwerk sequencer with blue led's, blue lcd, extra trigger outputs and unique 1U expander panel ebay item 7335941382 Doepfer A100 Midi Modular synth ebay item 7335983057 Analogue Solutions OBERKO
2005-07-10 by allanjhall
I'm having a re-orginisation of my modular synth setup and a clearout of some of my surplus Doepfer and other modular synth stuff and thought I'd let the group have first choice of them before I list them on ebay, all are in very good condition and perfect working order. I'm in t
2005-07-10 by eapulford
Hello, I recently bought a Basic System 2 with the PSU2 from Analoghaven (great transaction, by the way) and already have a question about further expansion. I want to build my own case that would be the equivalent of (2) G6 frames to take advantage of the PSU2's extra current (1
2005-07-09 by synthtrader
hello David, > dont i need a keyboard to play the A100 mini? Not necessarily. I guess that depends on your definition of "play". :) For traditional stuff yes though there are a multitude of alternate controllers: Theremin, ribbons, step sequencers, random voltage outputs etc. Som
2005-07-08 by David Marino
dont i need a keyboard to play the A100 mini? Dieter Doepfer wrote:My recommendation if you think about expanding the Mini system: We offer the mini system in a G6 case too (lower frame without modules). The additional price is only Euro 40 (i.e. about US$55). This is much cheape
2005-07-08 by frnz_mauro
Hello members I'm looking for a sequencer 1) the schaltwerk ( option with blue leds) 2) or a maq16/3 ( option with blue leds) send me an offer thanks for the reply FRANZ Mauro from Belgium mail : franzmusin@skynet.be
2005-07-08 by Dieter Doepfer
My recommendation if you think about expanding the Mini system: We offer the mini system in a G6 case too (lower frame without modules). The additional price is only Euro 40 (i.e. about US$55). This is much cheaper than a second G3 frame (Euro 280). We recommend to fill the lower
2005-07-08 by Dieter Doepfer
My recommendation if you think about expanding the Mini system: We offer the mini system in a G6 case too (lower frame without modules). The additional price is only Euro 40 (i.e. about US$55). This is much cheaper than a second G3 frame (Euro 280). We recommend to fill the lower
2005-07-08 by grove@zeta.org.au
> is the mini system worth buying if im going to slowly build on it? > It just doesnt lookk like much. I have the Mini System, with all the default modules installed. I think it is an excellent entry level modular. I also have a G6 case and a MAQ 16/3 that I will be fitting into
2005-07-07 by levka0
Well, if you can get it for an exceptionally good price, maybe it is. However, IMO the A-120 filter is not the best or most versatile A-100 filter around, and the A-145 LFO does not have a very high space/performance ratio compared to the new A-143-3 I agree with the previous sug
2005-07-07 by ilanode
It is very similiar to a small mono synth of the 80ies. Compared to a Korg MS 10 you miss the ext. input but gain a 2nd VCO. If you dont't need the Midi-CV module you could replace it (and the blind panel) with a 2nd EG and let's say a S&H. Not too bad for a start. Regards, Ingo
2005-07-07 by Achtung_999
In my opinion (and I did this myself) you can better buy a 6HP case with some modules you think you'll need.. and fill the rest of the case later. On 7/7/05, David Marino wrote: > is the mini system worth buying if im going to slowly build on it? it just > doesnt lookk like much.
2005-07-07 by alt-mode
Hi Folks, A big thank you to those that responded to my gear sale! I have already shipped a bunch of stuff and there is more to go. I guess I should have asked more for some of the popular items -particularly the Doepfer cases! ;) I've lowered the prices on the remaining items. I
2005-07-07 by David Marino
is the mini system worth buying if im going to slowly build on it? it just doesnt lookk like much. --------------------------------- Yahoo! Mail Stay connected, organized, and protected. Take the tour [Non-text portions of this message have been removed]
2005-07-06 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, "voodoopudding" wrote: > I am new here so forgive me if I am going over old ground. Can anyone > offer advice about buying Doepfer for delivery to the UK? Are there > any > additional costs - import duty etc? Or does anyone in UK actually > st
2005-07-06 by voodoopudding
I am new here so forgive me if I am going over old ground. Can anyone offer advice about buying Doepfer for delivery to the UK? Are there any additional costs - import duty etc? Or does anyone in UK actually stock the modules. Any help will be most welcome.
2005-07-04 by selfoscillate
i second that, especially for the a141. a range switch and inverted output like on the a140 would be cool for the a141 too. best wishes ingo --- In Doepfer_a100@yahoogroups.com, "pela_gius" wrote: > Is there any chance that any other revisions will be made to these > modules at t
2005-07-03 by alt-mode
Time to sell some stuff from the latest studio rearrangement: The page with all of the info is: http://www.alt-mode.com/July05_Sale/ Items for sale are: 1. Moog MemoryMoog Plus Synthesizer w/ case 2. Moog Modular Synthesizer Keyboard 3. Elka Rhapsody 490 String Synthesizer 4. Nor
2005-07-01 by pela_gius
Is there any chance that any other revisions will be made to these modules at this time? It seems like a good opportunity to take some feedback from users and make other tweaks and improvements to the designs so that these modules all become improved "mkII" versions.
2005-06-30 by levka0
Apologies on forehand if this is considered off-list, but there have been some discussions previously on this subject here. For those of you you are noth handy with a drill & soldering iron, (like me), the competition has just brought out a passive 4-way attentuator. http://www.u
2005-06-29 by Bakis Sirros
hello all, :-) the third PARALLEL WORLDS album FAR AWAY LIGHT has been released! it features many diverse tracks from low-tempo electronica to ambient and even electro-like tracks. of course, again, the tracks have been composed using everything that my "wavemountain" studio has,
2005-06-29 by Dieter Doepfer
Right. But we still have some CEM3381 in stock so the next production series of A-134 and A-135 is "safe". After this even these modules will have to be redesigned (may be with THAT VCAs or the Analog Devices SSM2164 Quad VCA). Even for the A-126 we still have some CEM3382 in sto
2005-06-29 by Dieter Doepfer
The only solution I can see is the planned universal vactrol module. You could use the vactrol outputs of this module to control any variable resistor (like the Attack or Decay controls of A-143-1) with CV. This module is still under development but we don't expect any problems a
2005-06-29 by Keld Sørensen
I´ve found a photo of the NIN studio at: http://www.nin.com/visuals/2-23-05.jpg showing Doepfer A100, Buchla 200e, EMS synthi A, Asys stuff and other assorted gear. Keld --- In Doepfer_a100@yahoogroups.com, "unknown freak" wrote: > I've seen a studio photo with several 6U racks f
2005-06-29 by selfoscillate
hello dieter, --- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer" wrote: > Right. But we still have some CEM3381 in stock so the next production series > of A-134 and A-135 is "safe". After this even these modules will have to be > redesigned (may be with THAT VCAs or the Analo
2005-06-29 by esa kotala
[ic shortage] seems an issue that requires thought other than A-120 VCF1 low pass, what A-100 modules are made of discrete components? _________________________________________________________________ 3 vrk:n sääennuste http://www.msn.fi/uutiset/saa
2005-06-29 by selfoscillate
afaik the forthcoming "universal vactrol module" can be used to add vc of attack and decay times, but due to the necessary redesign of several "older" modules the planned ones are postponed. i don't have any other idea, the service manual for the a143/1 is still not available and
2005-06-28 by unknown freak
I've seen a studio photo with several 6U racks full of Doepfer. --Chuck -----Original Message----- From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of Bakis Sirros Sent: Tuesday, June 28, 2005 4:36 AM To: Doepfer_a100@yahoogroups.com Subject: Re:
2005-06-28 by Tim Stinchcombe
Dieter, > The CA3080 and CA3046 are no longer in production and > this affects a lot of > modules: A-107, A-110, A-113, A-116, A-124, A-127, > A-130, A-131, A-132, > A-141, A-142, A-147, A-171 (I hope I did not overlook > a module). We have to If the CA3080 would have been a poss
2005-06-28 by danv_83
any ideas? thanks. --- In Doepfer_a100@yahoogroups.com, "danv_83" wrote: > I'm interested in adding some cv ins to the complex envelope module. > I'd like to be able to control the attack and decay times through cv. > I know real-estate is one of the hardest parts here, so I was
2005-06-28 by Robair, Gino
Hello Ingo, Bakis, and other Doepferians, According to Remix magazine, who interviewed Trent and company in the May 2005 issue: > The studio photos in that issue are total gear porn. The opening spread has a clear shot of several racks of Eurorack modules, and even the new Buchla
2005-06-28 by Bakis Sirros
dieter doepfer says: "The development of the announced/planned new modules will take some time as we have problems with already existing modules because of obsolete parts. The CA3080 and CA3046 are no longer in production and this affects a lot of modules: A-107, A-110, A-113, A-